...

Part and shape hatch pattern properties htc

by taratuta

on
Category: Documents
53

views

Report

Comments

Transcript

Part and shape hatch pattern properties htc
Option
Description
120= Special (use this color for gray shade)
The hatch color defines the line width for the printer. If you do
not define a color for a hatch in the surfacing.htc file,
Tekla Structures uses the color defined on the Appearance tab
in surface treatment properties. The Visible lines color and type
is used for the front of the surface treatment, and the Hidden
lines for the back.
Automatic Scaling
and Rotation (optional)
1=true
0=false (default)
See also Adding automatic surface treatment in drawings on page 510
8.13 Part and shape hatch pattern properties (.htc)
The hatch patterns for material types and names are defined in a hatch schema file (in
a .htc file). Different drawing types (general arrangement, assembly, single-part, and cast
unit drawings) have their own schema files. These hatch patterns are used when you set Type
to Automatic on the Fill page in the part or shape properties. The default schema files are
located in the ..\Tekla Structures\<version>\environments\common
\system folder.
The name of the schema file Tekla Structures uses for each drawing type is defined on the
Hatching page of the Advance Options dialog box:
•
set XS_DRAWING_GA_HATCH_SCHEMA=general.htc
•
set XS_DRAWING_ASSEMBLY_HATCH_SCHEMA=assembly.htc
•
set XS_DRAWING_SINGLE_PART_HATCH_SCHEMA=single.htc
•
set XS_DRAWING_CAST_UNIT_HATCH_SCHEMA=cast_unit.htc
The syntax of the schema file is:
Material type, Material name, Hatch name, Scale, Color,
Automatic scaling and rotation
An example of the .htc file:
Drawing settings
575
Part and shape hatch pattern properties (.htc)
Option
Material type
Description
STEEL, CONCRETE, TIMBER, MISCELLANEOUS (case
sensitive)
Material name
The material name defined for the part in part properties in the
model.
Hatch name
To check the hatch pattern names and related hatch patterns go to
the Fill tab in Part properties, select a hatch pattern from the Type
list and click the ... button next to the list. Then click a pattern to
see its name in the Type list. The selected hatch pattern is marked
with a red frame. Hatch names are case sensitive.
Scale
Scale is a numeric value that Tekla Structures uses to scale
hatches.
Color
0=black (default)
1=white
2=red
3=green
Drawing settings
576
Part and shape hatch pattern properties (.htc)
Fly UP