Comments
Transcript
Placement properties for annotation objects
See also Hard-coded bending type identifiers in reinforcement shape recognition Adding pull-out pictures in reinforcement marks on page 489 Setting automatic reinforcement and reinforcement mesh properties on page 512 Reinforcement/Neighbor reinforcement and mesh properties in drawings on page 577 8.16 Placement properties for annotation objects Use the settings in the Placing dialog boxes for annotation objects and dimensions to control how the annotation objects are placed in a drawing. Option Description Search margin Defines the distance within which Tekla Structures searches for a space to place a dimension, mark, weld mark or another annotation object. Minimal distance Defines the minimum distance of the mark, weld mark, dimension or another annotation object from the part. Quarter For marks and manually added annotation objects. Defines the areas Tekla Structures searches for a space to place the mark or annotation object. Weld placement depends on the welding direction. Welds can only be placed in certain sectors, so the Quarter options are not available. This option is available for manually added welds in the final drawing. Placing free allows Tekla Structures to search for the first suitable location for the mark, dimension, weld or another annotation object. fixed allows you to place the mark, dimension, weld or another annotation object in any location. When you use the option fixed, the annotation object stays where it is even though you update the drawing, whereas with free, Tekla Structures tries to find the optimal place for the annotation object. Direction Available only for manual dimensions. Defines the side on which Tekla Structures places dimensions (relative to the object being dimensioned). This setting affects the Placing - free setting. See also Object protection and placement settings in drawings on page 343 Drawing settings 586 Placement properties for annotation objects