...

Double-Take Version 4

by user

on
Category: Documents
7

views

Report

Comments

Transcript

Double-Take Version 4
2013 年 6 月
Double-Take Availability Ver6.0 SP1 Build3 (6.0.1.2039.3) リリースノート
シーティーシー・エスピー株式会社
事業本部 技術部
【概要】
本バージョンは、Double-Take Availability Ver6.0 SP1 Build0 (6.0.1.1791.0) の不具合修正版です。
【リリースバージョン】
6.0.1.2039.3
【主な新機能】
機能追加はありません。
【主な改善点】 ※主要なものを抜粋
■ Double-Take Management Service、および Double-Take Console がクラッシュする複数の問題を修正
■ N 対 1 構成の Files and Folders ジョブにて、Double-Take Console 上のステータス表示が〝Polling”となり、Target
サーバがハングする問題を修正
■ Mirroring 処理中に、Double-Take Console 上のステータス表示が〝Unknown”となる問題を修正
■ Microsoft SQL Server、もしくは Microsoft Exchange Server のプロテクションジョブを設定中に〝Communication
Error”が発生する問題を修正
■ Microsoft Exchange Server のプロテクションジョブ開始後、Microsoft Exchange Server の機能である Public Folder
Replication により、Source サーバ側にキューが蓄積され続ける問題を修正
■ Hub Transport Server の役割が含まれない Microsoft Exchange Server のプロテクションジョブにおける、Validation
処理内容を改良
■ TTL 値の Update に失敗すると、Microsoft SQL Server のプロテクションジョブの開始に失敗する問題を修正
■ Standalone to Cluster 構成の Files and Folders ジョブにて、データ転送用のネットワークを指定する項目を追加
■ Virtual Recovery Appliance サーバに 2 つ目の NIC が追加されている場合、Full-Server to ESX ジョブの作成に失敗
する問題を修正
■ Double-Take エンジン間の通信の問題により、Full-Server to ESX ジョブが使用できなくなる問題を修正
【注意点】
■ NAT 環境について
Double-Take Availability Ver6.0 (6.0.x.x.x) は NAT 環境をサポートしておりません。今後のバージョンで対応を予
定しておりますので、現時点では Ver5.3 SP2 をご利用ください。
【今後のリリース予定】
2013 年 8 月に本バージョンの修正項目を含む Double-Take Availability Ver6.0 SP2 のリリースを予定しています。
Copyright © 2013 CTCSP Corporation Engineering Department. All Rights Reserved
【CTCSP サポート情報】
以下記載の通り,弊社がサポートする機能に制限を設けておりますのでご注意下さい。
プラットフォーム及び機能
サポート可否
Windows 2003 ⇒ 2003 レプリケーション及びフェイルオーバー
○
Windows 2008 ⇒ 2008 レプリケーション及びフェイルオーバー
○
Windows 2012 ⇒ 2012 レプリケーション及びフェイルオーバー
○
Windows 2003 ⇒ 2008 or 2012
△
備考
レプリケーションのみ対応
レプリケーション及びフェイルオーバー
Windows 2008 ⇒ 2012 レプリケーション及びフェイルオーバー
△
Windows 2008 ⇒ 2003
△
レプリケーションのみ対応
Windows で下位互換がないファイル
レプリケーション及びフェイルオーバー
△
形式、属性には未対応
IPv6 レプリケーション及びフェイルオーバー
△
お客様環境での事前評価を推奨
Microsoft Failover Cluster(MSFC)及び Microsoft Cluster Service
○
Windows 2012 ⇒ 2003 or 2008
レプリケーション及びフェイルオーバー
(MSCS)
Full-Server Failover(FFO)
○
Windows2008 Hyper-V
○
Windows2012 Hyper-V
○
IPv4 環境のみ
CSV(Cluster Shared Volume)
に対応
○
Virtual Recovery Assistant(VRA)
※ Ver5.3.x 以前から Ver6.0.1 以降へのアップグレードを予定されている場合、Source 及び Target の両サーバに対して、
アップグレードを実施する必要があります。
アップグレードの際には、既存のプログラムをアンインストールの上、新規インストールしてください。(詳細な手順につきまし
ては、各種インストールガイドを参照してください。)
Copyright © 2013 CTCSP Corporation Engineering Department. All Rights Reserved
【既知の不具合修正】※Ver6.0 SP1 Build0(6.0.1.1791.0) からの累計差異
Answer ID
内
容
34824
Security concern about the registry hive backup.
37171
Double-Take Console not showing green circle with checkmark icon despite job being in a good state.
37238
Job start fails with timeout on BuildingBlocks.DnsUtil.GetDnsScope.
37394
Double-Take service crashes when attempting to roll the log file (dtlog1.dtl to dtlog2.dtl).
37420
Replica encounters a 0x7B Stop Code on failover due to missing driver.cab file on source.
37484
Option to 'retain target configuration' gets reset if 'Update DNS' is not selected.
37539
Management Service crashes on target shortly after creating job.
37627
"This job type is not supported for a virtual source with a virtual activation code and a physical target."
37792
Failover fails with 'System.NullReferenceException: Object reference not set to an instance of an object' error in the
job log.
37799
Exchange public folder issues with Availability 6.0.
37847
Public folders not available after failover of a database availability group (DAG).
38006
Double-Take service crashes when a restore or verify is stopped.
38070
Jobs allow target route to be set to an address that also exists on the source.
38071
Job allows user to select multiple cluster applications.
38072
Mirror hangs with a status of, 'Restarting enumeration on [filename]' in same directory.
38097
Cannot use Files and Folders job to protect data in C:¥users with one-to-one mapping.
38493
Mirror fails almost immediately after starting.
38663
Cannot restore after initiating failover via the Double-Take Console.
38766
Modifications to the snapshots schedule time are not saved.
38767
Management Service crashes shortly after starting and generates an Event ID 5000.
38768
The Double-Take service crashes with "invalid parameter".
38785
Script arguments swap around when editing job.
38786
SQL protection job fails to start.
38842
Double-Take Console crashes when trying to configure Hyper-V Host Level Job.
38844
Target server hangs in a 'Polling' state under Manage Servers.
38861
Validation items all go into 'error state' when protecting an Exchange server.
39020
"Unable to get reparse information for <Path to a filename> Error = 4390"
39021
Post failover and failback scripts not following, 'Delay until script completes' option.
39022
Job cannot manage connection.
39024
After a Full Server Failover, the target halts on a black screen during boot up.
39030
CoreManagement.exe using 100% of target CPU.
39040
No Target Route is selectable on standalone to cluster configuration.
39041
Job can be created without selecting fileserver group.
Copyright © 2013 CTCSP Corporation Engineering Department. All Rights Reserved
Answer ID
内
容
39044
'Failed to open file due to file closed for OpLock' with IgnoreOpLockErrors set to 1.
39047
Snapshots are stored on the target appliance.
39083
Double-Take Console crashing during normal operation.
39085
The Double-Take service crashes shortly after mirror starts.
39086
Exchange failover fails with Active Directory replication error.
39089
Management Service crashing after null reference exception.
39220
Job listed in Double-Take Console with unknown status but connection is mirroring.
39413
Console crashes when gathering job options.
39414
Communication error occurred after selecting target for Exchange 2007 job.
39552
Double-Take Console crashes when selecting additional files/folders to protect hyperlink.
39557
Double-Take Console crashes with a NullReference exception after selecting the source server.
39624
Double-Take Management service crashes during normal operation.
39625
Clustered File and Folder jobs are stopped after failback.
39690
Double-Take workflow crashes when RAS NICs are being used on the source.
39691
Connection resuming before VHD's are reattached to target host.
39692
Double-Take Management service crashing randomly after job creation.
Copyright © 2013 CTCSP Corporation Engineering Department. All Rights Reserved
Fly UP