Comments
Description
Transcript
IPC-BX955 Fedora 12 インストール確認書
IPC-BX955 Fedora 12 インストール確認書 Fedora-12-i386-DVD.iso 目次 1 2 3 調査環境 .................................................................................................................................................. - 3 1.1 ハードウェア .................................................................................................................................... - 3 - 1.2 ソフトウェア .................................................................................................................................... - 3 - 調査項目の手順と結果............................................................................................................................. - 4 2.1 Console 日本語入力 ......................................................................................................................... - 4 - 2.2 シリアルポート................................................................................................................................. - 5 - 2.3 LINE出力 ......................................................................................................................................... - 6 - 2.4 LINE入力 ......................................................................................................................................... - 7 - 2.5 CF ..................................................................................................................................................... - 8 - 2.6 PowerManagement.......................................................................................................................... - 9 - 2.6.1 S1, S3, S4 ステート.................................................................................................................... - 9 - 2.6.2 S5 ステート ................................................................................................................................ - 9 - 付録 ....................................................................................................................................................... - 10 3.1 メモリの確認 .................................................................................................................................. - 10 - 3.2 runlevel対応サービス..................................................................................................................... - 10 - 3.3 CPU情報 ......................................................................................................................................... - 11 - 3.4 メモリ情報 ...................................................................................................................................... - 12 - 3.5 カーネル モジュールメッセージ .................................................................................................... - 13 - 3.6 PCI Device情報 .............................................................................................................................. - 22 - 3.7 システムロードモジュール ............................................................................................................. - 22 - 3.8 バージョン情報............................................................................................................................... - 23 - 3.9 IRQ利用情報................................................................................................................................... - 23 - 3.10 I/Oポート利用情報........................................................................................................................ - 23 - -2- 1 調査環境 調査環境 1 1.1 ハードウェア IPC-BX955 ハードウェアの詳細なスペックについては、ユーザーズマニュアルを参照してください。 LAN 1 COM 2 COM 1 イヤフォン クロスケーブル LAN 1 クロスケーブル 汎用 PC(Windows XP) IPC-BX955(Linux) 図 1 ハードウェアの接続形態 ※マウス、モニタ等は省略しています。 ※マイクが無い場合(マイク感度が悪く音が拾えない場合)は、マイク代替として PC の Line-OUT から Line-IN へ直接接続でも可能です。 1.2 ソフトウェア 本調査で使用したディストリビューションについては以下の通りです。 ・Fedora 12 バージョン情報 [root@f12d4g ~]# cat /proc/version Linux version 2.6.31-127.fc12.i686.PAE ([email protected]) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7)(GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009 [root@f12d4g ~]# -3- 2 調査項目の手順と結果 2 調査項目の手順と結果 本調査では以下の内容を調査致しました。また、インストール後に行った調査に関しましては、root 権限にて 実行しています。 表 1 調査結果 調査項目 USB 接続メディアよりインストール出来る事 OS 正常に通常インストールが可能 メモリ free の内容確認 キーボード USB 確認内容 マウス キーボード、マウスが正常に動作する事 インストール DVD からインストール作業が正常 結果 備考 ○ ○ 付録参照 ○ インストール時及び OS 入力後共正常 ○ インストール時及び OS 入力後共正常 インストール時正常認識 に行える事 ○ 日本語入力 日本語入力を行い表示できる事 ○ DVI ディスプレイを接続し正しく表示される事 ○ シリアルポート シリアルポートより通信が出来ること ○ ライン出力 イヤフォンを接続し音の出力が確認出来る事 ○ イヤフォンにて音声確認 マイク入力 外部から音声入力し録音出来る事 ○ ライン出力から入力し録音 LAN DHCP でネットワーク情報が取得出来る事 ○ CD/DVD FAT32 でフォーマットした CF を CF2 に挿入し、 CF 読み書きすることができるか。 スタンバイ(S1 ステート)動作 OS インストール後 auto mount 確認 DHCP サーバより IP address 取得確認。 Yum にてパッケージインストールが可能 ○ ○ 正常動作 Power サスペンド(S3 ステート)動作 IPC-BX955 の BIOS がサポートしていないため。 Management ハイバネーション(S4 ステート)動作 IPC-BX955 の BIOS がサポートしていないため。 システム終了時の電源 OFF（S5 ステート）動作 2.1 ○ 正常動作 Console 日本語入力 GNOME 画面上で「Ctrl」 + 「space」または「半角/全角 キー」を押下します。 画面右下に日本語のコントロールが表示され、日本語が入力できることを確認します。 -4- 2 調査項目の手順と結果 2.2 シリアルポート 文字列の送受信テスト IPC-BX955 の COM1 と COM2 にクロスケーブルを用いて接続します。 ターミナルウインドウを２つ起動してください。片側のターミナルウインドウで、以下のコマンドを入力して ください。このコマンドを入力した方が受信側となります。 [root@localhost [root@localhost ]# cat /dev/ttyS0 ]# もう片方が送信側です。以下のコマンドを入力して文字列（aiueo）を送信してください。 [root@localhost ]# echo aiueo > /dev/ttyS1 [root@localhost ]# 受信側のターミナルウインドウに送信側のターミナルウインドウから送信したテキストが表示されれば、正常 に通信が出来ています。以下の画面が表示されます。 -5- 2 調査項目の手順と結果 2.3 LINE出力 デスクトップのタスクバーより、「システム」→「設定」→「サウンド」を開きます。 以下の画面が表示され、ラジオ釦を押すとイヤフォンに音が出力されるのを確認します。 -6- 2 調査項目の手順と結果 2.4 LINE入力 録音と再生 録音を行う場合、まずマイクの接続、または LINE-OUT と LINE-IN の接続を行って下さい。 その後録音の設定としまして、ALSA ユーティリティのミキサーコマンドよりマイクの設定が Caprure [on] の状態か確認し,off であれば capture [on]に設定してください。 [root@localhost ]# amixer –c 0 ＜省略＞ ＜省略＞ [root@localhost ]# amixer –c 0 set Mic 100% unmute cap （Capture が off の場合、実行する） [root@localhost ]# IPC-BX955 機にて録音を行います。LINE-OUT と LINE-IN の接続を行っている場合、エラー! 参照元が見 つかりません。の操作を行い、音を出力してください。 [root@localhost ]# arecord -t wav -d 15 -f dat test1.wav 録音中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート 48000 Hz, ステレオ [root@localhost ]# 録音したファイルの再生を行います。 [root@localhost ]# aplay test1.wav 再生中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート [root@localhost ]# -7- 48000 Hz, ステレオ 2 調査項目の手順と結果 2.5 CF FAT32でフォーマットしたCF （容量4.0GB）をCF2スロットに挿入し、BX955の電源をONします。 Linux起動後、デスクトップ操作メニューの「場所」→「ファイルシステム 4.0GB（容量の表示はCF容量に 依存します）」が表示され、自動的にマウントされていることを確認します。 下記コマンドの「74A-1B48」は自動的にマウントが行われ名前が設定されたものなので、同じディレクトリ 名になるとは限りません。 端末上よりマウント状況の確認を行います。 [root@localhost ]# mount ＜省略＞ /dev/sdb1 on /media/74A-1B48 type vfat [root@localhost ]# (rw) テキストファイルの読み書きを行います。 [root@localhost ]# echo hello > /media/74A-1B48/hello.txt [root@localhost ]# cat /media/74A-1B48/hello.txt hello [root@localhost ]# アンマウントを行い、ファイルが読めなくなる事を確認します。 [root@localhost ]# umount /media/74A-1B48 [root@localhost ]# ls /media/74A-1B48 [root@localhost ]# マウントを行い、ファイルが読めるようになる事を確認します。 [root@localhost ]# mount -t vfat /dev/sdb1 /media/74A-1B48 [root@localhost ]# ls /media/74A-1B48 [root@localhost ]# -8- 2 調査項目の手順と結果 2.6 PowerManagement 2.6.1 S1, S3, S4 ステート パワーマネジメントステータスを確認し、サスペンド処理が使用可の状態か確認を行います。 1 [root@localhost ]# cat /sys/power/state standby disk [root@localhost ]# このシステムは、スタンバイ(standby)とハイバネーション(disk)をサポートしていると表示されますが IPC-BX955 の BIOS はハイバネーションをサポートしていないため、ご利用になれません。 表 2 /sys/power/state 出力文字 ACPI 状態 意味 関連コマンド standby スタンバイ S1 mem サスペンド S3 pm-suspend disk ハイバネーション S4 pm-hibernate スタンバイ機能(ACPI S1 ステート)は、以下で動作を確認することができます。 [root@localhost ]# echo -n standby > /sys/power/state スタンバイ状態に遷移したら、電源スイッチを ON してください。 Linux の復帰を確認できます。 2.6.2 S5 ステート シャットダウンコマンドを実行してください。 シャットダウン終了後、本体の電源が OFF になることを確認できます。 [root@localhost ]# shutdown -h now http://www.linux.or.jp/JF/JFdocs/kernel-docs-2.6/power/states.txt.html http://netlog.jpn.org/r271-635/2008/06/centos_52.html 1 -9- 3 付録 3 3.1 付録 メモリの確認 [root@f12d4g ~]# free total used free shared Mem: 1017912 340976 676936 -/+ buffers/cache: 147340 870572 Swap: 196600 0 196600 [root@f12d4g ~]# 3.2 buffers cached 0 24572 169064 runlevel対応サービス [root@f12d4g ~]# chkconfig --list NetworkManager 0:off abrtd 0:off acpid 0:off atd 0:off auditd 0:off avahi-daemon 0:off bluetooth 0:off btseed 0:off bttrack 0:off cpuspeed 0:off crond 0:off cups 0:off dnsmasq 0:off firstboot 0:off haldaemon 0:off httpd 0:off ip6tables 0:off iptables 0:off irda 0:off irqbalance 0:off lvm2-monitor 0:off mdmonitor 0:off messagebus 0:off microcode_ctl 0:off multipathd 0:off netconsole 0:off netfs 0:off netplugd 0:off network 0:off nfs 0:off nfslock 0:off nscd 0:off ntpd 0:off ntpdate 0:off openvpn 0:off pcscd 0:off portreserve 0:off psacct 0:off rdisc 0:off restorecond 0:off rpcbind 0:off rpcgssd 0:off rpcidmapd 0:off rpcsvcgssd 0:off rsyslog 0:off saslauthd 0:off sendmail 0:off smartd 0:off smolt 0:off snmpd 0:off snmptrapd 0:off sshd 0:off udev-post 0:off wpa_supplicant 0:off ypbind 0:off [root@f12d4g ~]# 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:on 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:on 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:off 1:on 1:off 1:off 2:on 2:off 2:on 2:off 2:on 2:off 2:off 2:off 2:off 2:on 2:on 2:on 2:off 2:off 2:off 2:off 2:on 2:on 2:off 2:off 2:on 2:on 2:on 2:on 2:off 2:off 2:off 2:off 2:off 2:off 2:off 2:off 2:off 2:off 2:off 2:on 2:on 2:off 2:off 2:off 2:on 2:off 2:off 2:off 2:on 2:off 2:on 2:off 2:off 2:off 2:off 2:on 2:on 2:off 2:off 3:on 3:on 3:on 3:on 3:on 3:on 3:on 3:off 3:off 3:on 3:on 3:on 3:off 3:off 3:on 3:off 3:on 3:on 3:off 3:on 3:on 3:on 3:on 3:on 3:off 3:off 3:on 3:off 3:off 3:off 3:on 3:off 3:off 3:off 3:off 3:on 3:on 3:off 3:off 3:off 3:on 3:on 3:on 3:off 3:on 3:off 3:on 3:off 3:off 3:off 3:off 3:on 3:on 3:off 3:off 4:on 4:off 4:on 4:on 4:on 4:on 4:on 4:off 4:off 4:on 4:on 4:on 4:off 4:off 4:on 4:off 4:on 4:on 4:off 4:on 4:on 4:on 4:on 4:on 4:off 4:off 4:on 4:off 4:off 4:off 4:on 4:off 4:off 4:off 4:off 4:on 4:on 4:off 4:off 4:off 4:on 4:on 4:on 4:off 4:on 4:off 4:on 4:off 4:off 4:off 4:off 4:on 4:on 4:off 4:off - 10 - 5:on 5:on 5:on 5:on 5:on 5:on 5:on 5:off 5:off 5:on 5:on 5:on 5:off 5:off 5:on 5:off 5:on 5:on 5:off 5:on 5:on 5:on 5:on 5:on 5:off 5:off 5:on 5:off 5:off 5:off 5:on 5:off 5:off 5:off 5:off 5:on 5:on 5:off 5:off 5:off 5:on 5:on 5:on 5:off 5:on 5:off 5:on 5:off 5:off 5:off 5:off 5:on 5:on 5:off 5:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 6:off 3 付録 3.3 CPU情報 [root@f12d4g ~]# cat /proc/cpuinfo processor :0 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping :2 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings :2 core id :0 cpu cores :1 apicid :0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm bogomips : 3191.84 clflush size : 64 power management: processor :1 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping :2 cpu MHz : 1600.000 cache size : 512 KB physical id : 0 siblings :2 core id :0 cpu cores :1 apicid :1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm bogomips : 3191.49 clflush size : 64 power management: [root@f12d4g ~]# - 11 - 3 付録 3.4 メモリ情報 [root@f12d4g ~]# cat /proc/meminfo MemTotal: 1017912 kB MemFree: 105660 kB Buffers: 57452 kB Cached: 641684 kB SwapCached: 0 kB Active: 490296 kB Inactive: 319976 kB Active(anon): 139468 kB Inactive(anon): 156 kB Active(file): 350828 kB Inactive(file): 319820 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 131976 kB HighFree: 252 kB LowTotal: 885936 kB LowFree: 105408 kB SwapTotal: 196600 kB SwapFree: 196600 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 111132 kB Mapped: 59564 kB Slab: 82176 kB SReclaimable: 58048 kB SUnreclaim: 24128 kB PageTables: 6908 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 705556 kB Committed_AS: 567084 kB VmallocTotal: 122880 kB VmallocUsed: 7764 kB VmallocChunk: 101820 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 12280 kB DirectMap2M: 894976 kB [root@f12d4g ~]# - 12 - 3 付録 3.5 カーネル モジュールメッセージ [root@f12d4g ~]# dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.i686.PAE ([email protected]) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x3f6e0 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask 0C0000000 write-back 1 base 03F800000 mask 0FF800000 uncachable 2 base 03F700000 mask 0FFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1016MB, range: 8MB, type UC reg 2, base: 1015MB, range: 1MB, type UC total RAM coverred: 1015M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1015MB, range: 1MB, type UC reg 2, base: 1016MB, range: 8MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000375fe000 NX (Execute Disable) protection: active 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 10000-18000 RAMDISK: 37535000 - 37fefbf4 Allocated new RAMDISK: 00afb000 - 015b5bf4 Move RAMDISK from 0000000037535000 - 0000000037fefbf3 to 00afb000 - 015b5bf3 ACPI: RSDP 000f9280 00014 (v00 IntelR) ACPI: RSDT 3f6e3000 00034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 3f6e3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 3f6e3100 0561F (v01 INTELR AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 3f6e0000 00040 ACPI: MCFG 3f6e87c0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 3f6e8740 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) ACPI: SSDT 3f6e8e60 00482 (v01 PmRef CpuPm 00003000 INTL 20041203) ACPI: Local APIC address 0xfee00000 128MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 - 13 - 3 付録 node 0 bootmap 00014000 - 0001aec0 (9 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000af1210] TEXT DATA BSS ==> [0000400000 - 0000af1210] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000af2000 - 0000afa0be] BRK ==> [0000af2000 - 0000afa0be] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [0000afb000 - 00015b5bf4] NEW RAMDISK ==> [0000afb000 - 00015b5bf4] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] found SMP MP-table at [c00f4f90] f4f90 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x0003f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003f6e0 On node 0 totalpages: 259695 free_area_init_node: node 0, pgdat c0995ba0, node_mem_map c15b6200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 258 pages used for memmap HighMem zone: 32736 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 3f700000 (gap: 3f700000:a0900000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 15 pages at c1daa000, static data 37788 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665 Kernel command line: ro root=/dev/mapper/vg_f12d4g-lv_root LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 rhgb quiet PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 5195840 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000375fe:0003f6e0) Memory: 1006088k/1039232k available (3569k kernel code, 32304k reserved, 2214k data, 448k init, 131976k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc09a7000 - 0xc0a17000 ( 448 kB) .data : 0xc077c76f - 0xc09a6028 (2214 kB) .text : 0xc0400000 - 0xc077c76f (3569 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Fast TSC calibration using PIT Detected 1595.922 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.84 BogoMIPS (lpj=1595922) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 - 14 - 3 付録 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Counters: Atom events, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20611 entries in 41 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.49 BogoMIPS (lpj=1595746) CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6383.33 BogoMIPS). sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=500 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=192 bytes sizeof(task_struct)=3256 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 9:53:12 Date: 03/11/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xfde80000-0xfdefffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold - 15 - 3 付録 pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.2: reg 10 io port: [0xf000-0xf0ff] pci 0000:00:1e.2: reg 14 io port: [0xfa00-0xfa3f] pci 0000:00:1e.2: reg 18 32bit mmio: [0xfdffe000-0xfdffe1ff] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xfdffd000-0xfdffd0ff] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold pci 0000:00:1e.2: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4000 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0xf800-0xf80f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfdde0000-0xfddfffff] pci 0000:01:00.0: reg 18 io port: [0xcf00-0xcf1f] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd9e0000-0xfd9fffff] pci 0000:02:00.0: reg 18 io port: [0xbf00-0xbf1f] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd900000-0xfd9fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:06: IRQ 4 override to edge, high pnp 00:07: IRQ 3 override to edge, high pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x680-0x6ff has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:09: ioport range 0x400-0x4bf could not be reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0xf0000-0xfffff could not be reserved system 00:0c: iomem range 0x3f6e0000-0x3f6fffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved - 16 - 3 付録 system 00:0c: iomem range 0x100000-0x3f6dffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0xc000-0xcfff pci 0000:00:1c.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: 0xb000-0xbfff pci 0000:00:1c.1: MEM window: 0xfd900000-0xfd9fffff pci 0000:00:1c.1: PREFETCH window: 0x000000fd800000-0x000000fd8fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:1e.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:01: resource 2 pref mem [0xfda00000-0xfdafffff] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff] pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 10986k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1268301192.475:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1729 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: SSDT 3f6e8840 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20041203) processor LNXCPU:00: registered as cooling_device1 ACPI: SSDT 3f6e8d00 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) processor LNXCPU:01: registered as cooling_device2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) isapnp: Scanning for PnP cards... - 17 - 3 付録 isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GME Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 - 18 - 3 付録 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16238 buckets, 64952 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:100:879 rtc_cmos 00:03: setting system clock to 2010-03-11 09:53:14 UTC (1268301194) Initalizing network drop monitor service ata2.00: ATA-4: GBDriver RA6, ra6h.b00, max UDMA/33 ata2.00: 7864320 sectors, multi 0: LBA ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA GBDriver RA6 ra6h PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sd 1:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sd 1:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 448k freed Write protecting the kernel text: 3572k Write protecting the kernel read-only data: 1716k dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=04bb, idProduct=010a usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: HDH-U usb 1-1: Manufacturer: I-O DATA DEVICE,INC. usb 1-1: SerialNumber: 00000006A212 usb 1-1: configuration #1 chosen from 1 choice [drm] Initialized drm 1.1.0 20060810 usb 1-2: new high speed USB device using ehci_hcd and address 3 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm:intel_init_bios] *ERROR* VBT signature missing [drm] failed to find VBIOS tables usb 1-2: New USB device found, idVendor=0411, idProduct=00f9 usb 1-2: New USB device strings: Mfr=96, Product=76, SerialNumber=63 usb 1-2: Product: Mass Storage Device usb 1-2: Manufacturer: USB2.0 External usb 1-2: SerialNumber: DEF1105977F3 usb 1-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning fbcon: inteldrmfb (fb0) is primary device [drm] DAC-6: set mode 800x600 b Console: switching to colour frame buffer device 100x37 fb0: inteldrmfb frame buffer device - 19 - 3 付録 registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=0461, idProduct=4d22 usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 3-1: Product: USB Optical Mouse usb 3-1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0 usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: New USB device found, idVendor=413c, idProduct=2105 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Dell USB Keyboard usb 3-2: Manufacturer: Dell usb 3-2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0 dracut: Scanning devices sda2 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_f12d4g" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_f12d4g" now active EXT4-fs (dm-0): barriers enabled kjournald2 starting: pid 243, dev dm-0:8, commit interval 5 seconds EXT4-fs (dm-0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_f12d4g-lv_root dracut: Loading SELinux policy type=1404 audit(1268301197.751:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 144734 rules. SELinux: 8192 avtab hash slots, 144734 rules. SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats SELinux: 75 classes, 144734 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1268301198.598:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root usb-storage: device scan complete scsi 2:0:0:0: Direct-Access I-O DATA HDH-U 1.09 PQ: 0 ANSI: 2 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI disk usb-storage: device scan complete scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX09 PQ: 0 ANSI: 0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg2 type 5 udev: starting version 145 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 e1000e 0000:01:00.0: irq 26 for MSI/MSI-X e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a9:00:b8 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 - 20 - 3 付録 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 27 for MSI/MSI-X e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a9:00:b9 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M DH TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1e.2: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 51085 usecs (2462 samples) intel8x0: clocking to 48000 device-mapper: multipath: version 1.1.0 loaded EXT4-fs (dm-0): internal journal on dm-0:8 EXT4-fs (sda1): barriers enabled kjournald2 starting: pid 637, dev sda1:8, commit interval 5 seconds EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode SELinux: initialized (dev sda1, type ext4), uses xattr Adding 196600k swap on /dev/mapper/vg_f12d4g-lv_swap. Priority:-1 extents:1 across:196600k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team e1000e 0000:01:00.0: irq 26 for MSI/MSI-X e1000e 0000:01:00.0: irq 26 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e 0000:02:00.0: irq 27 for MSI/MSI-X e1000e 0000:02:00.0: irq 27 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth1: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:01:00.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own render error detected, EIR: 0x00000010 page table error PGTBL_ER: 0x00000002 [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking render error detected, EIR: 0x00000010 page table error PGTBL_ER: 0x00000002 [drm] DAC-6: set mode 1152x864_65.00 10 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 eth0: no IPv6 routers present metacity[1345]: segfault at 616d2078 ip 00d6d9e1 sp bff1b990 error 6 in libSM.so.6.0.0[d6c000+7000] fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts [drm] DAC-6: set mode 800x600 b [drm] DAC-6: set mode 11 [root@f12d4g ~]# [root@f12d4g ~]# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) - 21 - 3 付録 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller [root@f12d4g ~]# 3.6 PCI Device情報 [root@f12d4g ~]# lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller [root@f12d4g ~]# 3.7 システムロードモジュール [root@f12d4g ~]# lsmod Module Size Used by fuse 52712 4 sunrpc 158388 1 ip6t_REJECT 4620 2 nf_conntrack_ipv6 17548 2 ip6table_filter 3168 1 ip6_tables 11144 1 ip6table_filter ipv6 239428 24 ip6t_REJECT,nf_conntrack_ipv6 cpufreq_ondemand 6160 2 acpi_cpufreq 8848 0 dm_multipath 14472 0 uinput 6852 0 snd_intel8x0 28144 2 snd_ac97_codec 92136 1 snd_intel8x0 ac97_bus 1424 1 snd_ac97_codec snd_seq 46960 0 snd_seq_device 6232 1 snd_seq snd_pcm 64932 2 snd_intel8x0,snd_ac97_codec i2c_i801 10284 0 serio_raw 5156 0 snd_timer 17992 2 snd_seq,snd_pcm snd 50908 10 snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer iTCO_wdt 10444 0 soundcore 5672 1 snd iTCO_vendor_support 2812 1 iTCO_wdt snd_page_alloc 7892 2 snd_intel8x0,snd_pcm e1000e 109272 0 i915 190204 2 drm_kms_helper 22688 1 i915 usb_storage 46824 1 drm 135064 3 i915,drm_kms_helper i2c_algo_bit 4820 1 i915 i2c_core 23120 4 i2c_i801,i915,drm,i2c_algo_bit video 19088 1 i915 output 2468 1 video [root@f12d4g ~]# - 22 - 3 付録 3.8 バージョン情報 [root@f12d4g ~]# cat /proc/version Linux version 2.6.31.5-127.fc12.i686.PAE ([email protected]) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009 [root@f12d4g ~]# 3.9 IRQ利用情報 [root@f12d4g ~]# cat /proc/interrupts CPU0 CPU1 0: 156 0 IO-APIC-edge timer 1: 2 0 IO-APIC-edge i8042 3: 2 1 IO-APIC-edge 4: 4 0 IO-APIC-edge 8: 1 0 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 14: 0 0 IO-APIC-edge ata_piix 15: 40058 0 IO-APIC-edge ata_piix 16: 3 1292 IO-APIC-fasteoi uhci_hcd:usb5, i915 17: 762 0 IO-APIC-fasteoi Intel ICH7 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 19: 81 10008 IO-APIC-fasteoi uhci_hcd:usb3 23: 50639 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 26: 20817 0 PCI-MSI-edge eth0 27: 6 1191 PCI-MSI-edge eth1 NMI: 0 0 Non-maskable interrupts LOC: 473329 459891 Local timer interrupts SPU: 0 0 Spurious interrupts CNT: 0 0 Performance counter interrupts PND: 0 0 Performance pending work RES: 16299 17734 Rescheduling interrupts CAL: 33 141 Function call interrupts TLB: 898 4024 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 9 9 Machine check polls ERR: 0 MIS: 0 [root@f12d4g ~]# 3.10 I/Oポート利用情報 [root@f12d4g ~]# cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0073 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.2 0170-0177 : ata_piix 01f0-01f7 : 0000:00:1f.2 01f0-01f7 : ata_piix 02f8-02ff : serial 0376-0376 : 0000:00:1f.2 0376-0376 : ata_piix 03c0-03df : vga+ 03f6-03f6 : 0000:00:1f.2 03f6-03f6 : ata_piix 03f8-03ff : serial 0400-047f : 0000:00:1f.0 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0428-042f : ACPI GPE0_BLK - 23 - 3 付録 0430-0433 : iTCO_wdt 0460-047f : iTCO_wdt 0480-04bf : 0000:00:1f.0 04d0-04d1 : pnp 00:01 0500-051f : 0000:00:1f.3 0500-051f : i801_smbus 0680-06ff : pnp 00:01 0880-088f : pnp 00:01 0cf8-0cff : PCI conf1 b000-bfff : PCI Bus 0000:02 bf00-bf1f : 0000:02:00.0 c000-cfff : PCI Bus 0000:01 cf00-cf1f : 0000:01:00.0 d000-dfff : PCI Bus 0000:03 f000-f0ff : 0000:00:1e.2 f000-f0ff : Intel ICH7 f800-f80f : 0000:00:1f.2 f800-f80f : ata_piix fa00-fa3f : 0000:00:1e.2 fa00-fa3f : Intel ICH7 fb00-fb1f : 0000:00:1d.3 fb00-fb1f : uhci_hcd fc00-fc1f : 0000:00:1d.2 fc00-fc1f : uhci_hcd fd00-fd1f : 0000:00:1d.1 fd00-fd1f : uhci_hcd fe00-fe1f : 0000:00:1d.0 fe00-fe1f : uhci_hcd ff00-ff07 : 0000:00:02.0 [root@f12d4g ~]# - 24 - 3 付録 発行 株式会社コンテック 大阪市西淀川区姫里3-9-31 〒555-0025 日本語 http://www.contec.co.jp/ 英語 http://www.contec.com/ NA00920(LYLV901) 中国語 http://www.contec.com.cn/ [08242010] 本製品および本書は著作権法によって保護されていますので無断で複写、複製、転載、改変することは禁じられています。