...

Samsung T769 Galaxy S Blaze. Call Settings

by taratuta

on
Category: Documents
32

views

Report

Comments

Transcript

Samsung T769 Galaxy S Blaze. Call Settings
Call Settings
To access the Call settings menu:
䊳
Press
➔
and then tap
(Settings) ➔Call.
– or –
From the Home screen, tap
➔ Settings ➔ Call.
Configuring General Call Settings
Configure the general call settings using this option.
1.
From the Home screen, tap
2.
Tap one of the following options:
➔ Settings ➔ Call.
• Call rejection: allows you to manage your rejection mode and
rejection list.
– Auto reject mode: sets the phone to automatically reject incoming
calls or messages.
– Auto reject list: provides access to current rejection entries and
numbers.
• Set reject messages: allows you to manage both existing rejection
messages and create new ones.
• Call alert: allows you to assign call alert tones and activate call
alerts and vibration.
– Answer vibration: vibrates the phone when the called party answers.
– Call status tones: assigns sounds settings during the call. Choose
from: Call connect tone, Minute minder, and Call end tone.
– Alerts on call: selects whether alarm and message notification is
turned off during a call.
• Call answering/ending: allows you to manage the settings for
answering and ending calls.
– Answering key allows you to press a key to answer the phone.
– Automatic answering, when connected, automatically answers a call
via the headset after a period of time. Selections are: Off, after 1
second, after 2 seconds, after 3 seconds, after 4 seconds, or after
5 seconds.
– The power key ends calls allows you to press the power key to end
the current call.
• Turn on proximity sensor: allows you to turn off the LCD when the
phone is near your face during a call so you do not accidentally tap
a key.
• Call forwarding: configures call forwarding options.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to “TTY Mode” on page 220.
Changing Your Settings
219
• Hearing aids: allows you to enable/disable hearing aid
compatibility. For more information, refer to “HAC Mode” on
page 221.
• Additional settings: allows you to configure additional call settings.
For more information, refer to “Configuring Additional Voice
Call Settings” on page 221.
• Voicemail service: allows you to view your voicemail carrier.
For more information, refer to “Voicemail” on page 222.
• Voicemail: allows you to both view and assign your voicemail
contact number. For more information, refer to “Voicemail” on
page 222.
Configuring Call Forwarding
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Call forwarding.
2.
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf,
hard of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with select TTY devices. Please check
with the manufacturer of your TTY device to ensure that it is
compatible with digital cell phones.
Your phone and TTY device will connect via a special cable that
plugs into your phone’s headset jack. If this cable was not
provided with your TTY device, contact your TTY device
manufacturer to purchase the connector cable.
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ TTY mode.
Tap an available option:
• Always forward: incoming calls are re-routed to a secondary
number that you specify.
• Forward when busy: forwards all your calls to voicemail when your
phone is busy.
• Forward when unanswered: automatically forwards to your
voicemail number when the phone is not answered, and otherwise
allows you to enter a voicemail number.
• Forward when unreachable: automatically forwards to your
voicemail number when the phone is not in service, or is turned off.
220
TTY Mode
2.
Tap Full TTY to activate the feature, or TTY mode off to
deactivate the feature. Off is the default setting.
HAC Mode
Fixed Dialing Numbers
This menu is used to activate or deactivate Hearing Aid
Compatibility for this device.
1.
Press
➔
and then tap
(Settings) ➔
Call.
2.
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
Tap the Hearing aids field to activate the feature (green
check mark), or tap it again to deactivate the feature. Off is
2.
Tap Enable FDN.
the default setting.
3.
At the prompt, enter your PIN2 code and tap OK.
Configuring Additional Voice Call Settings
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Additional settings.
2.
Tap one of the following options:
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code could cause the phone to lock. Contact customer
service for assistance.
• Caller ID: chooses whether your number is displayed when
someone answers your outgoing call. Choose from: Network
default, Hide number, or Show number.
• Call barring: blocks specific types of calls (All outgoing calls,
International calls, etc..).
• Call waiting: notifies you of an incoming call while you are on
another call.
• Auto redial: automatically redial the dialed number if it is unable to
connect or the call is cut off.
• Fixed Dialing Numbers: see description below.
Changing Your Settings
221
Changing the PIN2 Code
1.
Press
➔
4.
and then tap
Tap FDN list then press
and then tap Add contact or
edit the contacts that were stored.
(Settings) ➔
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
2.
Tap Change PIN2.
3.
At the prompt, enter your old PIN2 code.
4.
At the prompt, enter a new PIN2 code.
5.
Confirm your PIN2 code.
Voicemail
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering the PIN2
incorrectly three times will cause the device to lock. Contact
customer service for assistance.
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
Press
➔
Allows you to view and assign your voicemail contact number.
To view your current carrier:
1.
and then tap
➔
and then tap
Tap My carrier.
1.
Press
➔
and then tap
2.
Tap Voicemail number to now view your number within the
Tap Enable FDN.
Voicemail number field.
3.
At the prompt, enter your PIN2 code and tap OK.
– or –
222
(Settings) ➔
Call ➔ Voicemail.
2.
FDN is enabled.
(Settings) ➔
To view or change your current voicemail access number:
(Settings) ➔
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
Press
Call ➔ Voicemail service.
2.
Managing the FDN List
1.
The PIN2 code is provided by your carrier. Entering the PIN2
incorrectly three times will cause the device to lock. Contact
customer service for assistance.
Fly UP