Samsung T769 Galaxy S Blaze. USB Tethering

Activating Visibility
䊳
Press
➔
3.
and then tap
Wireless and network ➔ Bluetooth settings ➔ Visible.
The device is now activated for discovery other devices for
Enter a PIN to pair with the device, if one is required, and
tap OK.
(Settings) ➔
USB Utilities
1.
Press
➔
and then tap
(Settings) ➔
a period of time determined by the value set within the
Wireless and network ➔ USB utilities ➔ Connect storage to
Visible time-out menu.
PC.
Note: Your device visibility is based on the time set within the Visible
time-out field (2 minutes, 5 minutes, 1 hour, or Never). This value
appears as a countdown within this Visible time-out field.
2.
If prompted, tap OK to turn USB debugging mode off.
3.
Plug in a compatible USB cable to begin using the device
for mass storage mode.
Scanning for Devices
USB Tethering
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Bluetooth settings ➔
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Scan for devices. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
2.
Tap a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
Note: You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to: http://www.samsung.com/us/support/
downloads.
䊳
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ USB tethering and Mobile HotSpot.
For more information, refer to “USB Tethering” on page 202.
214