Samsung Galaxy Light. Bluetooth settings

To activate your connection:
1. From the main Settings page, tap Connections tab.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status.
3. Tap Wi-Fi Direct.
4. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect ➔ Scan and select all the device
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
218
5. Tap Done. The direct connection is then established.
Confirm
appears in the Status bar.
6. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
“Connected” and your connected device is listed within
the Wi-Fi Direct devices listing.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a
device name, activate your phone so other Bluetooth devices
can discover it, or scan for other, available Bluetooth devices
with which to pair. For more information, refer to “Bluetooth”
on page 200.
Turning Bluetooth On and Off
To turn Bluetooth on:
1. From the Home screen, press
and then tap
Settings ➔
(Connections tab).
2. In a single motion touch and slide the Bluetooth slider
to the right to turn it on.
The slider color indicates the activation status. When
active,
displays in the Status area.
To turn Bluetooth off:
1. From the Home screen, press
Settings.
Activating Visibility
and then tap
2. In a single motion touch and slide the Bluetooth slider
to the left to turn it off.
Note: Bluetooth must be enabled prior to use.
Changing the Device Name
1. From the Home screen, press
and then tap
Settings ➔
(More tab) ➔ About device.
2. Tap the Device name field and use the on-screen
keyboard to edit the current device name.
3. Tap
to erase the current device name and enter
a new name for this device using the keyboard.
4. Tap OK to confirm your setting.
1. From the main Settings page, tap Connections tab ➔
Bluetooth.
2. Verify your Bluetooth is active.
3. From the top of the Bluetooth settings page, toggle the
state of the visibility check mark. Activating this feature
enabled your device visible allows other devices to pair
and communicate.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so
you can pair with them.
1. From the main Settings page, tap Connections tab ➔
Bluetooth.
2. From the bottom of the Bluetooth settings page, tap
Scan to search for visible external Bluetoothcompatible devices such as headsets, devices,
printers, and computers.
Important! Some Bluetooth devices are secured and require a
PIN number to confirm and pair with them.
Changing Your Settings
219