Comments
Description
Transcript
超硬リーマ Aシリーズ - FPreamer.com
総合カタログ GENERAL CATALOGUE -11 Vol. エフ・ピー・ツール株式会社 F.P.TOOLS CO.,LTD. 目 次 INDEX 型 式 Abbreviation 超硬リーマ Carbide Reamers サーメットリーマ Cermet Reamers 超硬ミニチュアドリル Carbide Miniature Drill ポイントセッター Point Setter ハイスリーマ High Speed Steel Reamers アジャスタブルリーマ Adjustable Reamers ハイスリーマ 受注生産品 Order Made High Speed Steel Reamers 参考資料 Technical Information 商品名 Name 超硬リーマ SHシリーズ SH Carbide Reamers SH Series 超硬リーマ Gシリーズ CG Carbide Reamers G Series 超硬リーマ Cシリーズ CC Carbide Reamers C Series MTGシリーズ CG-MT 超硬リーマ Carbide Reamers MTG Series 超硬μ(ミュー)リーマ CM Carbide μ Reamers 超硬リーマ Bシリーズ CB Carbide Reamers B Series 超硬リーマ Aシリーズ CA Carbide Reamers A Series 超硬リーマ Hシリーズ CH Carbide Reamers H Series 超硬リーマ Rシリーズ CR Carbide Reamers R Series サーメットリーマ Sシリーズ CS Cermet Reamers S Series ドリーマー φ3.0シャンク DR D'reamer Shank Dia. 3.0 ドリーマー φ1.0シャンク DM D'reamer Shank Dia. 1.0 F.P. ポイントセッター PS F.P. Point Setter DLCリーマ HD DLC Reamers F.P. ゴールドリーマ ストレート刃 HG F.P. Gold Reamers Straight flute F.P. ゴールドリーマ スパイラル刃 HG-S F.P. Gold Reamers Spiral flute ハンドリーマ ストレート刃 HR Hand Reamers Straight flute ハンドリーマ スパイラル刃 HR-S Hand Reamers Spiral flute ハイ・ヘリカルリーマ HH Hi-Helical Reamers ハイ・ヘリカルリーマ HH-MT MT MT Hi-Helical Reamers レーザーテーパーピンリーマ HP Laser Taper Pin-Reamers (1/50) アジャスタブルリーマ AR Adjustable Reamers アジャスタブルリーマ替刃 AB Adjustable Reamers Blades AN,AG,AD アジャスタブルリーマ部品 Adjustable Reamers Parts チャッキングリーマ HC Chucking Reamers ロングハンドリーマ HL Long Hand Reamers マシンリーマ HM Machine Reamers 特殊品(見積について) Order-made Products 穴寸法公差表 Table of standard tolerance grades for Holes インチサイズから㎜への換算表 Inch-to-mm conversion table 硬さ換算表 Hardeness conversion table リーマ加工のトラブルとその対策 Reamer trouble shooting リーマの形状について Reamer shape 切削油について Cutting Oils ページ数 Page 形 状 Appearance サイズ Size 4 1.000∼14.050 0.005㎜とび 6 0.300∼12.100 0.005㎜とび 8 2.910∼12.100 0.005㎜とび 10 12.10∼30.00 0.01㎜とび 12 0.300∼12.100 1μmとび 14 0.90∼20.00 0.01㎜とび 16 0.300∼12.100 0.005㎜とび 18 1.00∼16.00 0.01㎜とび 20 1.00∼12.10 0.01㎜とび 22 2.90∼10.00 0.01㎜とび 24 0.05∼0.30 0.01㎜とび 26 0.05∼0.30 0.01㎜とび 26 28 1.000∼14.100 0.005㎜とび 30 1.000∼14.100 0.005㎜とび 30 1.000∼14.100 0.005㎜とび 32 0.30∼40.00 0.01㎜とび 32 1.00∼40.00 0.01㎜とび 36 1.50∼16.49 0.01㎜とび 37 3.00∼35.00 0.01㎜とび 38 0.3∼30.0 0.1㎜とび 40 13A∼R 41 13A∼R 42 43 1.0∼25.0 0.1㎜とび 44 1.0∼20.0 0.1㎜とび 46 3.0∼50.0 0.1㎜とび 48 49 50 51 52 53 55 安全にご使用いただく為のお願い リーマ刃径寸法許容差 JIS規格と当社規格比較 ※このカタログの内容を改良のため、予告なく仕様変更及び、製作を中止することもあります。 The above specification may change for improvement, and we may stop producing some products without prior notice. 被削材 Work Piece 被削材・用途 Work Piece . Use 完全止り穴 for Stop-Holes 一般被削材 for General Works 一般被削材/深穴対応 for General Works / suitable for Deep Hole cutting 一般被削材 for General Works 一般被削材/超精密加工 for General Works / Precision Holes バニシング/内面鏡面仕上 for Burnishing アルミ・鋳物 for Aluminum and cast iron 一般被削材/高速・深穴加工 for General Works / High-speed use and Deep Holes 高硬度 for difficult-to-cut materials HRC60 ステンレス・難削材 for Stainless steel and difficult-to-cut materials 精密微細穴加工 for Miniature precision Hole 精密微細穴加工 for Miniature precision Hole 精密微細穴加工揉み付工具 for before drilling process アルミ合金・銅加工用 for Aluminum and Copper Alloy 一般被削材/高耐久性 for General Works / Long Tool Life 一般被削材/高耐久性 for General Works / Long Tool Life 一般被削材 for General Works 一般被削材 for General Works 一般被削材/高速加工 for General Works / High-speed use 一般被削材/高速加工 for General Works / High-speed use 一般被削材 for General Works 刃径調整式 Adjustable 刃径調整式 Adjustable 刃径調整式 Adjustable 一般被削材 for General Works 一般被削材 for General Works 一般被削材 for General Works 銅 銅合金 軟 鋼 炭素鋼 合金鋼 工具鋼 ステンレス 鋳 鉄 Mild Steels Carbon Steels Alloy Steels Tool Steels Stainless Steels Cast Iron SS SXXC SUS FC/FCD A/ADC ◎ ◎ ◎ ◎ ○ ○ ○ ◎ ◎ ◎ ◎ ○ ◎ ○ ○ ○ ○ ◎ ◎ ◎ ◎ ○ ◎ ○ ○ ○ ○ ◎ ◎ ◎ ◎ ○ ◎ ○ ○ ○ ○ ◎ ◎ ◎ ◎ ○ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ◎ ◎ ◎ ○ ○ ○ ◎ ◎ SCM/SUJ SKH/SKD ◎ ○ アルミニウム 鋳物・合金 (複合材を除く) 樹脂系 Aluminum Resin 調質材 Copper Alloy Hardened Steels C ∼HRC40 ∼HRC50 ∼HRC60 ○ ○ ○ ◎ ○ ○ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ◎ ○ ○ ○ ○ ◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ◎ ◎ ◎ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ◎ ◎ ○ ○ ◎ ○ ◎ ○ ○ ○ ◎ ◎ ○ ◎ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ◎ ○ ○ 被削材・用途別適用リーマ相関図 超硬リーマ 被削材・用途 ハイスリーマ CC〈P. 8〉 CG〈P. 6〉 CM〈P.12〉 一般被削材 HG〈P.30〉 CC〈P. 8〉 CG〈P. 6〉 CM〈P.12〉 CA〈P.16〉 アルミニウム HD〈P.28〉 CC〈P. 8〉 CG〈P. 6〉 CM〈P.12〉 CA〈P.16〉 鋳 鉄 CC〈P. 8〉 CG〈P. 6〉 CM〈P.12〉 CS〈P.22〉 ステンレス CR〈P.20〉 高 硬 度 鋼 CH〈P.18〉 深 穴 加 工 CC〈P. 8〉 CH〈P.18〉 高 速 加 工 CB〈P.14〉 バニシング SH〈P. 4〉 完全止り穴 CM〈P.12〉 高精度加工 *◎ Stands for best suited and ○ stands for good enough. −1− HG〈P.30〉 HH〈P.36〉 HR〈P.32〉 HH〈P.36〉 超硬リーマ被削材別推奨切削条件 被 削 材 Workpiece 適用リーマ (推奨順) Applicable Reamer Cシリーズ Gシリーズ μリーマ 軟 鋼 (SS) Hシリーズ Mild Steel Bシリーズ Cシリーズ Gシリーズ μリーマ 炭 素 鋼 (SxxC) Hシリーズ Carbon Steel Bシリーズ Cシリーズ Gシリーズ μリーマ 合 金 鋼 Hシリーズ (SCM/SUJ) Alloy Steel Bシリーズ Sシリーズ Sシリーズ Sシリーズ 2.9∼6.0 6.0∼10.0 Cシリーズ Gシリーズ μリーマ 0.3∼3.0 3.0∼12.0 12.0∼30.0 工 具 鋼 Hシリーズ Tool Steel ステンレス (SUS) Stainless Steel 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.9∼3.0 3.0∼12.0 12.0∼20.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.9∼3.0 3.0∼12.0 12.0∼20.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.9∼3.0 3.0∼12.0 12.0∼20.0 2.9∼6.0 6.0∼10.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 2.9∼6.0 6.0∼10.0 Cシリーズ Gシリーズ μリーマ (SKH/SKD) 刃径D Diameter (mm) 回転数を求める公式 Carbide Reamers Recommended Cutting Conditions 周速V 送 り Cutting Feed Speed (mm/rev) (m/min) リーマ代 Removal Amount (mm) 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.003∼0.05 0.03∼0.15 0.1∼0.5 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.003∼0.05 0.03∼0.15 0.1∼0.5 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.003∼0.05 0.03∼0.15 0.1∼0.5 0.005∼0.1 0.05∼0.3 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.3 0.15∼0.4 0.2∼0.8 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.3 0.15∼0.4 0.2∼0.8 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.3 0.15∼0.4 0.2∼0.8 0.1∼0.2 0.15∼0.3 30∼45 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 30∼50 0.005∼0.1 0.05∼0.3 0.1∼0.2 0.15∼0.3 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.1∼0.2 0.15∼0.3 0.2∼0.6 10∼25 20∼35 8∼25 10∼20 20∼30 5∼20 8∼15 15∼30 5∼15 35∼50 5∼15 10∼25 5∼12 1000V N= πD −2− V:周 速(m/min) D:刃 径(mm) N:回転数(min−1) 面粗度Ry Surface Roughness (μm) 拡大代 ページ Page 12.5 大 ⇒ 6・8・10・12 12.5 大 ⇒ 18 3.2 大 ⇒ 14 6.3 大 ⇒ 6・8・10・12 6.3 大 ⇒ 18 3.2 大 ⇒ 14 6.3 大 ⇒ 6・8・10・12 6.3 大 ⇒ 18 3.2 大 ⇒ 14 6.3 大 ⇒ 22 6.3 小 ⇒ 6・8・10・12 6.3 小 ⇒ 18 6.3 小 ⇒ 22 3.2 小 ⇒ 22 6.3 小 ⇒ 6・8・10・12 超硬リーマ被削材別推奨切削条件 被 削 材 Workpiece 適用リーマ (推奨順) Applicable Reamer Aシリーズ 鋳 鉄 (FC/FCD) Cast Iron Cシリーズ Gシリーズ μリーマ Hシリーズ Bシリーズ Aシリーズ ア ル ミ (A/ADC) Aluminum Rシリーズ 1.0∼3.0 3.0∼12.0 樹 脂 系 (複合材料を除く) Hシリーズ Resin Bシリーズ Cシリーズ Gシリーズ μリーマ Copper Alloy Hシリーズ 調 質 鋼 Cシリーズ Gシリーズ μリーマ ∼HRC40 Hシリーズ 調 質 鋼 Cシリーズ Gシリーズ μリーマ HRC40∼50 調 質 鋼 HRC50∼60 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.9∼3.0 3.0∼12.0 12.0∼20.0 0.3∼3.0 3.0∼12.1 Rシリーズ Cシリーズ Gシリーズ μリーマ (C) 0.3∼3.0 3.0∼12.1 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.9∼3.0 3.0∼12.0 12.0∼20.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 12.0∼16.0 0.3∼3.0 3.0∼12.0 12.0∼30.0 1.0∼3.0 3.0∼12.0 Cシリーズ Gシリーズ μリーマ Hシリーズ 銅 合 金 刃径D Diameter (mm) Carbide Reamers Recommended Cutting Conditions リーマ代 Removal Amount (mm) 面粗度Ry Surface Roughness (μm) 拡大代 0.005∼0.1 0.05∼0.3 0.1∼0.2 0.15∼0.3 6.3 大 ⇒ 16 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.003∼0.05 0.03∼0.15 0.1∼0.5 0.005∼0.1 0.05∼0.3 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.3 0.15∼0.4 0.2∼0.8 0.1∼0.2 0.2∼0.3 6.3 大 ⇒ 6・8・10・12 6.3 大 ⇒ 18 3.2 大 ⇒ 14 3.2 大 ⇒ 16 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.2 0.2∼0.3 0.3∼0.8 0.1∼0.3 0.15∼0.4 0.2∼0.8 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.1∼0.2 0.15∼0.3 0.2∼0.6 0.08∼0.15 0.1∼0.15 0.15∼0.45 0.08∼0.15 0.1∼0.15 0.15∼0.3 0.08∼0.15 0.05∼0.1 0.1∼0.3 0.05∼0.2 0.1∼0.3 3.2 大 ⇒ 6・8・10・12 3.2 大 ⇒ 18 12.5 小 ⇒ 6・8・10・12 12.5 小 ⇒ 18 12.5 小 ⇒ 14 6.3 大 ⇒ 6・8・10・12 6.3 大 ⇒ 18 6.3 小 ⇒ 6・8・10・12 6.3 小 ⇒ 18 6.3 小 ⇒ 6・8・10・12 9∼18 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.003∼0.05 0.03∼0.15 0.1∼0.5 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.005∼0.1 0.05∼0.3 0.15∼0.9 0.01∼0.025 0.05∼0.3 0.15∼0.9 0.03∼0.1 0.05∼0.35 0.15∼0.9 0.03∼0.1 0.05∼0.35 6.3 小 ⇒ 20 6∼12 0.03∼0.15 0.08∼0.2 0.05∼0.2 0.1∼0.3 1.6 小 ⇒ 20 周速V 送 り Cutting Feed Speed (mm/rev) (m/min) 8∼18 8∼18 20∼35 12∼23 15∼30 15∼30 20∼40 15∼20 40∼50 20∼30 10∼25 15∼30 5∼15 8∼20 5∼10 ページ Page ※ 上記以外の被削材については直接お問い合わせ下さい。 Contact us directly for details on materials other than those above. 1. 上記の推奨条件は目安となる数値です。調質の度合いやワーク形状、加工環境に合わせて適正化して下さい。 The cutting condition mentioned above is not the absolute condition, but just a recommendation. Please refer your circumstances of cutting condition and materials. 2. 工具やワークは確実に保持して下さい。特に、工具の振れには十分な注意が必要です。 Please cramp the tool and workpiece certainly. Especially, taking notice of the runout of the tool is important. −3− 完全止り穴用 超 硬 超微粒子 for Stop-Hole 超硬リーマ SHシリーズ 特殊 Coating 商品コード:SH○.○○○ 0.005mmとび SH Series 高精度加工対応 刃径公差(Tolerance)φD=0∼+0.005mm SHシリーズの特長 Features of SH Series ① 完全止り穴加工が可能 リーマ機構にエンド刃をプラス。完全止り穴加工が可能に。 右リードのため、切り屑の排出がスムーズ。上方向に切り屑を排出するため、底に溜まらない。 止り穴加工 概念図 ② ワーク材質:金型調質鋼(HRC40) 断面 新開発特殊コーティング 被膜硬度約3,000Hv。金型調質鋼から、インコネル、ハステロイなど、20∼50HRCの難削材に 対する加工が可能。 低摩擦係数の為、右リードの形状と合わせて切り屑の排出がスムーズ。 耐熱性にも優れているため、止り穴という過酷な条件下において威力を発揮。 ③ エンドミルシャンク採用 ① Thorough Blind Hole Reaming. With addition of bottom edge blades, complete blind hole is guaranteed. Right handed spiral facilitates cutting chips to come out upward, no remains of chips at the bottom. ② Brand New Special Coating. With its approximate hardness of 3,000Hv, it is suitable for work-pieces such as thermal refining steel, inconel, hastelloy, whose hardness ranging from 20 to 50HRC. Reduced friction ensures smooth removal of cutting chips. It is also applicable for difficult-to-cut materials due to its heat-resistant nature. ③ End-Mill Shank. Size of shank diameter is the same as that of standard end mill shank diameter. SHシリーズの推奨切削条件 Recommended Cutting Conditions 周 速 Cutting Speed 被 削 材 Workpiece 軟 鋼 SS 炭素鋼 S55C 周速(m/min) Cutting Speed 10∼35 10∼35 合金鋼 工具鋼 ステンレス SCM/SUJ SKH/SKD SUS 8∼35 5∼35 5∼25 鋳 鉄 FC/FCD アルミニウム 鋳物・合金 A/ADC 銅 銅合金 C 8∼35 15∼40 10∼40 調質材 ∼HRC40 ∼HRC50 5∼25 5∼20 送り速度 Feed 刃径(mm) Diameter 3.0 6.0 8.0 10.0 12.0 送り速度(mm/rev) Feed 0.05∼0.1 0.05∼0.1 0.08∼0.25 0.1∼0.3 0.15∼0.35 −4− SH Series Specification tables サイズ φ1.000∼φ4.895mm 45° φD ───── 底刃形状 ───── Shape of end face φd h6 超硬リーマ SHシリーズ寸法表 B 1 2 L (φ1.000∼2.945mm 形状) (φ1.000∼2.945mm Dia. Shape) L (φ2.950∼14.050mm 形状) (φ2.950∼14.050mm Dia. Shape) φd h6 45° φD サイズ φ4.900∼φ14.050mm B 1 2 刃数(Number of Flute) :4NT 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 型式・刃径φD Diameter (呼び寸法) 刃長 R1 Flute Length 首下 R2 Body Length 全長 L Overall Length SH 1.000∼1.095 SH 1.100∼1.595 SH 1.600∼1.995 SH 2.000∼2.945 SH 2.950∼2.995 SH 3.000∼3.095 SH 3.100∼3.995 SH 4.000∼4.095 SH 4.100∼4.895 SH 4.900∼4.995 SH 5.000∼5.095 SH 5.100∼5.995 SH 6.000∼6.095 SH 6.100∼6.995 SH 7.000∼7.095 SH 7.100∼7.995 SH 8.000∼8.095 SH 8.100∼8.995 SH 9.000∼9.095 SH 9.100∼9.995 SH 10.000∼10.095 SH 10.100∼10.995 SH 11.000∼11.095 SH 11.100∼11.995 SH 12.000∼12.095 SH 12.100∼12.995 SH 13.000∼13.095 SH 13.100∼13.995 SH 14.000∼14.050 5 6 8 10 20 〃 〃 〃 25 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 30 〃 〃 〃 〃 〃 〃 〃 〃 〃 15 16 18 20 40 〃 〃 〃 45 〃 〃 65 〃 70 〃 85 〃 90 〃 100 〃 105 〃 〃 〃 115 〃 〃 〃 50 〃 〃 〃 65 〃 〃 〃 75 〃 〃 100 〃 110 〃 125 〃 135 〃 150 〃 160 〃 〃 〃 170 〃 〃 〃 喰付長さB シャンク径φd Shank Chamfer Diameter Length 0.1 〃 〃 0.15 〃 〃 0.2 〃 〃 〃 〃 〃 〃 0.3 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 −5− 3 〃 〃 〃 〃 〃 4 〃 5 〃 〃 6 〃 8 〃 〃 〃 10 〃 〃 〃 12 〃 〃 〃 〃 〃 16 〃 標 準 定 価 Retail Price 1.0mmとび 0.1mmとび 0.005mmとび 11,710 − − 11,710 − 12,600 − 14,230 − − 16,770 − 18,180 − 22,650 − 22,650 − 24,720 − 26,980 − 29,020 − 31,090 − 33,120 − 35,220 − 12,880 12,880 12,880 − − 13,860 − 15,650 15,650 − 18,450 − 20,000 − 24,920 − 24,920 − 27,190 − 29,680 − 31,920 − 34,200 − 36,430 − 14,050 14,050 14,050 14,050 14,050 15,120 15,120 17,080 17,080 17,080 20,120 20,120 21,820 21,820 27,180 27,180 27,180 27,180 29,660 29,660 32,380 32,380 34,820 34,820 37,310 37,310 39,740 39,740 42,260 超 硬 K10 一般被削材用 for General works 超硬リーマ Gシリーズ 商品コード:CG○.○○○ 0.005mmとび G Series Gシリーズの特長 Features of G Series ① 超硬リーマ各シリーズの内、最も汎用的に使用できるリーマです。 ② 従来のハイスリーマに比べ耐久力が約5∼10倍で精度も長時間維持できます。 ③ 加工穴精度もハイスリーマより優れており、切削速度、送り速度をUPして使用可能です。 ④ 0.005㎜とびの為、サイズに切れ間が無く、マイナス公差の穴加工にも対応できます。 ① The most versatile reamer in carbide reamer series, suited for general applications. ② Five to ten times more durable than hi-speed steel reamer, and longer lasting. ③ The precision is superior to hi-speed reamer. Faster cutting speed and faster feed are applicable. ④ The size increment, 0.005mm as standard, covers various size ranges with high precision. It is even applicable for holes with minus tolerance. ■加工データ Techniqul data. ■ 表面粗さ測定 ■ 真円度測定 ■ Test result of the surface roughness ■ Test result of the roundness Y 10μm 5μm X 0.5 1.0 1.5 被 削 材:S55C Workpiece:S55C 2.0mm 6.25μm 切削条件 (P.2・3参照) −6− G Series Specification tables 超硬リーマ Gシリーズ寸法表 (φ0.300mm∼φ2.905mm形状) (φ0.300mm-φ2.905mm dia. shape) (φ2.910mm∼φ12.100mm形状) (φ2.910mm-φ12.100mm dia. shape) シャンク径公差:φd+0.010 +0.005 シャンク径公差:h7公差 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 喰付長さB Chamfer Length 刃 数 Number of Flute 標準定価 Retail Price CG 0.300∼0.395 CG 0.400∼0.405 CG 0.410∼0.495 CG 0.500∼0.505 CG 0.510∼0.595 CG 0.600∼0.605 CG 0.610∼0.695 CG 0.700∼0.705 CG 0.710∼0.795 CG 0.800∼0.895 CG 0.900∼0.995 CG 1.000∼1.005 CG 1.010∼1.305 CG 1.310∼1.495 CG 1.500∼1.505 CG 1.510∼1.995 CG 2.000 CG 2.005 CG 2.010∼2.505 CG 2.510∼2.595 CG 2.600∼2.905 CG 2.910∼3.000 CG 3.005 CG 3.010∼3.505 CG 3.510∼3.595 CG 3.600∼4.000 CG 4.005 CG 4.010∼4.505 CG 4.510∼4.595 CG 4.600∼5.000 CG 5.005 CG 5.010∼5.505 CG 5.510∼5.595 CG 5.600∼6.000 CG 6.005 CG 6.010∼6.595 CG 6.600∼7.000 CG 7.005 CG 7.010∼7.595 CG 7.600∼8.000 CG 8.005 CG 8.010∼8.595 CG 8.600∼9.000 CG 9.005 CG 9.010∼9.500 CG 9.505∼10.000 CG 10.005 CG 10.010∼11.000 CG 11.005 CG 11.010∼12.000 CG 12.005∼12.100 4 〃 5 〃 6 〃 10 〃 12 〃 〃 〃 15 16 〃 18 〃 〃 20 〃 〃 27 〃 〃 〃 〃 〃 30 〃 〃 〃 〃 〃 〃 〃 35 〃 〃 〃 〃 〃 40 〃 〃 〃 〃 〃 〃 〃 45 〃 50 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 60 〃 〃 〃 〃 〃 70 〃 〃 〃 80 〃 〃 〃 〃 〃 〃 〃 〃 〃 90 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0突出しセンタ 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.5 〃 〃 2 〃 〃 2.5 3.0 〃 3.0穴センタ 〃 3.5 4.0 〃 〃 4.5 5.0 〃 〃 5.5 6.0 〃 〃 7.0 〃 〃 8.0 〃 〃 9.0 〃 〃 10.0 〃 〃 11.0 〃 12.0 〃 0.1 〃 〃 〃 〃 〃 〃 〃 0.2 〃 〃 〃 〃 0.3 〃 0.4 〃 〃 0.5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 0.8 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 04,840 03.990 03,990 03,560 03,560 03,340 03,340 03,130 03,130 02,910 02,800 02,590 02,590 02,590 02,480 02,480 02,370 02,800 02,800 02,800 03,130 04,470 05,080 05,080 05,080 05,230 05,850 05,850 05,850 06,310 07,230 07,230 07,230 07,540 08,930 08,930 10,770 12,310 12,310 14,160 16,160 16,160 18,310 20,000 20,000 22,310 26,160 26,160 30,470 30,470 35,270 型式・刃径φD Diameter 各種コーティング品も製作させて頂きます。 Coated reamers are also available. −7− 一般被削材/深穴対応用 for General works/suitable for deep Hole cutting 超硬リーマ Cシリーズ 超 硬 K10 商品コード:CC○.○○○ 0.005mmとび C Series Cシリーズの特長 Features of C Series ① 超低価格 Special Low Price 単価:円/1本 unit : yen/1pce 刃 径 Diameter Cシリーズ標準定価 C Series Retail Price 04.000 06.000 08.000 10.000 12.000 03,660 05,260 08,600 11,100 14,000 コスト削減に寄与致します!! Cut down the processing cost. リーマ素材に超硬を採用し、なおかつ価格を大幅に抑えました。工具寿命の向上と、工具のコ ストの削減の2つのテーマにより加工コスト削減のお手伝いを致します。 Using carbide for the reamer material furthermore with the , special low price. With 2 theme : longer the tool s life and cut down the processing cost. ② 深穴の加工が可能 Suitable for Deep Hole Cutting シャンク径を細くしてあるため、深穴の加工が 可能。加工範囲が広がります。 Due to the shank dia. is thin, feasible for deep hole processing. Wide processing range. 超硬リーマCシリーズ Carbide Reamer, C Series ③ 高精度 High Accuracy 超硬リーマのベストセラー「Gシリーズ」と精度は同等。安心してお使い頂けます。 切削条件 , Have the accuracy with carbide reamer s best seller (G series) and usable without anxiety. (P.2・3参照) −8− C Series Specification tables 超硬リーマ Cシリーズ寸法表 (CG0.300mm∼CG2.905mm形状) (CG0.300mm∼CG2.905mm dia. shape) シャンク径公差:φd+0.010 +0.005 (CC2.910mm∼CC12.010mm形状) (CC2.910mm∼CC12.010mm dia. shape) CCシャンク径の計算φd 刃径φD シャンク径φd □. △00 例 3.000 ○ □. △05 例 3.005 ○ □. △10∼□. △95 例 3.010∼3.095 ○ 刃径公差(Tolerance)φD=0∼+0.005mm(J5) → → → → → → □. △ −0.1mm 3.0 −0.1mm □. △ −0.1mm 3.0 −0.1mm □. △ 3.0 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 喰付長さB Chamfer Length 刃 数 Number of Flute 標準定価 Retail Price CG 0.300∼0.395 CG 0.400∼0.405 CG 0.410∼0.495 CG 0.500∼0.505 CG 0.510∼0.595 CG 0.600∼0.605 CG 0.610∼0.695 CG 0.700∼0.705 CG 0.710∼0.795 CG 0.800∼0.895 CG 0.900∼0.995 CG 1.000∼1.005 CG 1.010∼1.305 CG 1.310∼1.495 CG 1.500∼1.505 CG 1.510∼1.995 CG 2.000 CG 2.005 CG 2.010∼2.505 CG 2.510∼2.595 CG 2.600∼2.905 4 〃 5 〃 6 〃 10 〃 12 〃 〃 〃 15 16 〃 18 〃 〃 20 〃 〃 50 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0突出しセンタ 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.5 〃 〃 2 〃 〃 2.5 3.0 〃 0.1 〃 〃 〃 〃 〃 〃 〃 0.2 〃 〃 〃 〃 0.3 〃 0.4 〃 〃 0.5 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 04,840 03.990 03,990 03,560 03,560 03,340 03,340 03,130 03,130 02,910 02,800 02,590 02,590 02,590 02,480 02,480 02,370 02,800 02,800 02,800 03,130 型式・刃径φD Diameter 刃 長 R Flute Length 20 〃 〃 〃 〃 〃 〃 25 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 全 長 L Overall Length 80 〃 〃 〃 〃 〃 〃 100 〃 〃 〃 〃 〃 〃 115 〃 〃 〃 〃 〃 〃 130 〃 〃 喰付長さB Chamfer Length 0.5 〃 〃 〃 〃 〃 〃 0.8 〃 〃 〃 〃 〃 〃 1.0 〃 〃 〃 〃 〃 〃 〃 〃 〃 刃 数 Number of Flute 4 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 型式・刃径φD Diameter (呼び寸法) CC 2.910∼3.000 CC 3.005∼3.995 CC 4.000 CC 4.005 CC 4.010∼4.995 CC 5.000 CC 5.005 CC 5.010∼5.995 CC 6.000 CC 6.005∼6.995 CC 7.000 CC 7.005∼7.995 CC 8.000 CC 8.005 CC 8.010∼8.995 CC 9.000 CC 9.005∼9.995 CC 10.000 CC 10.005∼10.995 CC 11.000 CC 11.005 CC 11.010∼11.995 CC 12.000 CC 12.005∼12.100 各種コーティング品も製作させて頂きます。 ※φ2.910mm未満のサイズはGシリーズ Coated reamers are also available. −9− 標準定価 Retail Price 03,470 03,570 03,660 04,100 04,100 04,400 04,840 04,840 05,260 06,260 07,400 08,300 08,600 09,460 09,460 09,700 10,300 11,100 12,200 12,900 13,500 13,500 14,000 14,500 超 硬 K10 一般被削材用 for General works 超硬リーマ MTGシリーズ 商品コード:CG○.○○MT MTG Series 0.01mmとび MTシャンク先ムクタイプ Solid-Head Carbide MTGシリーズの特長 Features of MTG Series ① 先ムクタイプ(刃部ソリッド)……刃部全てが超硬ソリッドのため、従来の付刃タイプよ りも高速切削加工が可能です。 ② 刃数が多い……従来の付刃タイプより刃数が多いため、一刃当たりの切削抵抗が少なくな ります。 ③ 穴精度良好……従来の付刃タイプより優れた真円度及び面粗度が得られます。 ① Higher speed machining possible than the conventional carbide insert tipped flutes due to Full Solid-head Carbide on this series. ② More effective machining capable by reason of Less Cutting Torque per a flute because this reamers has more cutting Flutes over that of carbide insert tipped one. ③ Excellent Roundness and Roughness obtainable owing to Full Solid-head Carbide. MTGシリーズの推奨切削条件 Recommended Cutting Conditions ① 回転数は右記を参照の上定めて下さい。 ② リーマ代はφ0.20∼φ0.60mmで ご使用下さい。 ③ 送りは、通常0.9mm/rev以下でご使用 下さい。 ① Refer to the table right-mentioned before determining the cutting speed (min−1). ② Use at a removal amount of φ0.20∼ φ0.60mm. ③ Normally use at a feed of 0.9mm/rev or less. 切削条件 (P.2・3参照) − 10 − 超硬リーマ MTGシリーズ寸法表 MTG Series Specification tables MTシャンク先ムクタイプ Solid-Head Carbide 刃径φD Diameter 喰付長さB Chamfer Length φ12.10∼φ13.60 φ13.61∼φ19.60 φ19.61∼φ24.60 φ24.61∼φ30.00 1.0mm 1.2mm 1.5mm 1.8mm 刃径公差(Tolerance)φD=0∼+0.005mm(J5) (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length CG 12.10MT∼12.60 45 CG 12.61MT∼13.10 〃 CG 13.11MT∼13.60 単価:円/1本 unit : yen/1pce シャンクMT Shank MT No. 刃 数 Number of Flute 標準定価 Retail Price 170 1 6 17,640 〃 〃 8 18,780 〃 〃 〃 〃 19,610 CG 13.61MT∼14.10 〃 〃 〃 〃 20,620 CG 14.11MT∼14.60 〃 200 2 〃 21,870 CG 14.61MT∼15.10 〃 〃 〃 〃 22,930 CG 15.11MT∼15.60 〃 〃 〃 〃 23,990 CG 15.61MT∼16.10 〃 〃 〃 〃 24,910 CG 16.11MT∼16.60 〃 〃 〃 〃 25,680 CG 16.61MT∼17.10 50 〃 〃 〃 26,820 CG 17.11MT∼17.60 〃 〃 〃 〃 27,720 CG 17.61MT∼18.10 〃 〃 〃 〃 28,280 CG 18.11MT∼18.60 〃 〃 〃 〃 28,890 CG 18.61MT∼19.10 〃 220 〃 〃 29,470 CG 19.11MT∼19.60 〃 〃 〃 〃 30,110 CG 19.61MT∼20.10 〃 〃 〃 〃 30,500 CG 20.11MT∼20.60 〃 〃 〃 〃 30,690 CG 20.61MT∼21.10 〃 〃 〃 〃 31,330 CG 21.11MT∼21.60 〃 〃 〃 〃 31,940 CG 21.61MT∼22.10 〃 〃 〃 〃 32,610 CG 22.11MT∼22.60 〃 〃 〃 〃 32,780 CG 22.61MT∼23.10 〃 〃 〃 〃 33,110 CG 23.11MT∼23.60 〃 250 3 〃 33,560 CG 23.61MT∼24.10 〃 〃 〃 〃 33,890 CG 24.11MT∼24.60 〃 〃 〃 〃 34,440 CG 24.61MT∼25.10 〃 〃 〃 〃 35,110 CG 25.11MT∼25.60 〃 〃 〃 〃 35,580 CG 25.61MT∼26.10 〃 〃 〃 10 36,250 CG 26.11MT∼26.60 〃 〃 〃 〃 36,940 CG 26.61MT∼27.10 〃 260 〃 〃 37,640 CG 27.11MT∼27.60 〃 〃 〃 〃 39,080 CG 27.61MT∼28.10 〃 〃 〃 〃 40,560 CG 28.11MT∼28.60 〃 〃 〃 〃 41,750 CG 28.61MT∼29.10 〃 〃 〃 〃 43,280 CG 29.11MT∼29.60 〃 〃 〃 〃 44,470 CG 29.61MT∼30.00 〃 〃 〃 〃 46,110 型式・刃径φD Diameter ストレートシャンクも製作させて頂きます。(別途見積り) − 11 − Straight shank are also available. 超 硬 K10 一般被削材用/超精密加工用 for General works/Precision hole 超硬μ(ミュー)・リーマ 商品コード:CM○.○○○ 0.001mmとび Carbide μ reamers ミュー・リーマの特長 Features of μ reamers ① 工具管理が容易……呼び寸法を 1μmとび に製作している為高精度な穴加工に向く上、 11800サイズの寸法選択が可能 ② 超高精度……公差0∼+1μm未満により超精密穴加工に最適 ③ 高耐久性……耐久性に優れ長時間精度維持が可能 ④ 用 途……一般被削材用 ① Easy to choose the size of diameter because of its increments, 0.001mm. ② Match the precision hole by its tolerance, +0.001 less/0. ③ Long tool life. ④ For general works. ミュー・リーマ使用上の注意 Attention for μ reamers 表示寸法は、あくまでリーマ最大刃径寸法を示したものであり、仕上がり加工穴径を保証した ものではありません。加工穴径は諸々の条件により変化します。お客様のご使用条件にかなっ た寸法のリーマを選定して下さい。 より精密な穴加工を行う場合は、精度の良いホルダー、及びコレット等で保持し、刃先の振れ を極力抑える様にして使用して下さい。 The display size is not the one to have guaranteed a finish manufacture hole diameter with the maximum diameter size of the reamers. The use condition changes a manufacture hole diameter. Please choose your favorite size depends on your decision concerning to your cutting environment and your cutting condition. Moreover, when requiring the hole manufacture of the high precision, using the good tool holder is highly recommended. 切削条件 (P.2・3参照) ミュー・リーマとは:SI単位においてマイクロを意味するギリシャ文字“μ”(ミュー)。この文字にちなんで 命名しました。 What is“μ”:This Greek letter means Micro(0.001mm)by SI unit, so we call this“μ Reamers” − 12 − Carbide μ Reamers Specification tables 超硬μ(ミュー)・リーマ寸法表 (φ0.300mm∼φ2.909mm形状) (φ0.300mm-φ2.909mm dia. shape) (φ2.910mm∼φ12.100mm形状) (φ2.910mm-φ12.100mm dia. shape) シャンク径公差:φd+0.010 +0.005 シャンク径公差:h7公差 刃径公差は0∼+0.001mm未満 Tolerance must be +0.001 less/0 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 喰付長さB Chamfer Length 刃 数 Number of Flute 標準定価 Retail Price CM 0.300∼0.399 CM 0.400∼0.409 CM 0.410∼0.499 CM 0.500∼0.509 CM 0.510∼0.599 CM 0.600∼0.609 CM 0.610∼0.699 CM 0.700∼0.709 CM 0.710∼0.799 CM 0.800∼0.899 CM 0.900∼0.999 CM 1.000∼1.009 CM 1.010∼1.309 CM 1.310∼1.499 CM 1.500∼1.509 CM 1.510∼1.999 CM 2.000 CM 2.001∼2.009 CM 2.010∼2.509 CM 2.510∼2.599 CM 2.600∼2.909 CM 2.910∼3.000 CM 3.001∼3.009 CM 3.010∼3.509 CM 3.510∼3.599 CM 3.600∼4.000 CM 4.001∼4.009 CM 4.010∼4.509 CM 4.510∼4.599 CM 4.600∼5.000 CM 5.001∼5.009 CM 5.010∼5.509 CM 5.510∼5.599 CM 5.600∼6.000 CM 6.001∼6.009 CM 6.010∼6.599 CM 6.600∼7.000 CM 7.001∼7.009 CM 7.010∼7.599 CM 7.600∼8.000 CM 8.001∼8.009 CM 8.010∼8.599 CM 8.600∼9.000 CM 9.001∼9.009 CM 9.010∼9.500 CM 9.501∼10.000 CM 10.001∼10.009 CM 10.010∼11.000 CM 11.001∼11.009 CM 11.010∼12.000 CM 12.001∼12.100 4 〃 5 〃 6 〃 10 〃 12 〃 〃 〃 15 16 〃 18 〃 〃 20 〃 〃 27 〃 〃 〃 〃 〃 30 〃 〃 〃 〃 〃 〃 〃 35 〃 〃 〃 〃 〃 40 〃 〃 〃 〃 〃 〃 〃 45 〃 50 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 60 〃 〃 〃 〃 〃 70 〃 〃 〃 80 〃 〃 〃 〃 〃 〃 〃 〃 〃 90 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0突出しセンタ 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.5 〃 〃 2.0 〃 〃 2.5 3.0 〃 3.0穴センタ 〃 3.5 4.0 〃 〃 4.5 5.0 〃 〃 5.5 6.0 〃 〃 7.0 〃 〃 8.0 〃 〃 9.0 〃 〃 10.0 〃 〃 11.0 〃 12.0 〃 0.1 〃 〃 〃 〃 〃 〃 〃 0.2 〃 〃 〃 〃 0.3 〃 0.4 〃 〃 0.5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 0.8 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 12,460 10,260 10,260 09,140 09,140 08,590 08,590 08,050 08,050 07,490 07,200 06,660 06,660 06,660 06,370 06,370 06,100 07,200 07,200 07,200 08,050 06,260 07,110 07,110 07,110 07,320 08,190 08,190 08,190 08,830 10,120 10,120 10,120 10,560 12,500 12,500 15,080 17,230 17,230 19,820 22,620 22,620 25,630 28,000 28,000 31,230 36,620 36,620 42,660 42,660 49,380 型式・刃径φD Diameter − 13 − 超 硬 K10 バニシング/内面鏡面仕上用 for Burnishing 超硬リーマ Bシリーズ 商品コード:CB○.○○ 0.01mmとび B Series 先端形状 Shape of end face 下記真円度図は当社Bシリーズを某ツーリングメーカーに於いて使 用して頂いた結果です。 The results for the roundness by using our B series were obtained at a famous collet manufacturer. Bシリーズの特長 Features of B Series ① 加工穴の鏡面仕上が可能です。 ② 下穴に倣わずに加工できます。 ① Inner surface mirror finishing of drilled hole possible. ② Cutting is possible without reamer-tracing the prepared hole. ■加工データ Techniqul data. ◆ 表面粗さ測定の比較[当社比/被削材:鋳鉄] ◆ Surface Roughness comparison(in-house) Material:cast iron 従来のH.S.Sリーマによる面粗度 当社Bシリーズ超硬リーマ使用による面粗度 Surface roughness by conventional H.S.S reamers Surface roughness by F.P. B series carbide reamers 切削条件 (P.2・3参照) − 14 − B Series Specification tables 超硬リーマ Bシリーズ寸法表 先端形状 Shape of end face 刃径φD Diameter 喰付長さB Chamfer Length φ0.90∼φ14.00 φ14.01∼φ20.00 0.5mm 1.0mm サイズ(Size) φ0.90mm∼ φ10.00mm φ10.01mm∼ φ14.00mm φ14.01mm∼ φ20.00mm ( ∼φ2.9mmは センター穴無し ) 単価:円/1本 unit : yen/1pce 公 差 Tolerance 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter +0.003 0 20 60 d=D 突出しセンタ 4 ── CB 0.97∼0.99 〃 〃 〃 〃 〃 04,810 型式・刃径φD Diameter (呼び寸法) * CB 0.90∼0.96 刃 数 Number of Flute 標準定価 Retail Price CB 1.00 〃 〃 〃 〃 〃 04,400 CB 1.01∼1.20 〃 30 70 〃 〃 04,100 CB 1.21∼1.50 〃 〃 〃 〃 〃 04,000 CB 1.51∼2.00 〃 〃 〃 〃 〃 04,100 CB 2.01∼2.50 〃 40 80 〃 〃 04,800 CB 2.51∼2.90 〃 〃 〃 〃 〃 05,200 CB 2.91∼2.99 〃 〃 〃 d=D 穴センタ 〃 05,200 CB 3.00 〃 〃 〃 〃 〃 05,300 CB 3.01∼4.00 〃 〃 〃 〃 〃 06,200 CB 4.01∼5.00 〃 〃 〃 〃 〃 07,600 CB 5.01∼6.00 〃 50 100 〃 〃 08,500 CB 6.01∼7.00 〃 〃 〃 〃 〃 10,900 CB 7.01∼8.00 〃 〃 〃 〃 〃 12,900 CB 8.01∼9.00 〃 60 115 〃 〃 14,200 CB 9.01∼10.00 〃 〃 〃 〃 〃 18,000 CB 10.01∼11.00 〃 65 〃 〃 6 22,600 CB 11.01∼12.00 〃 〃 130 〃 〃 27,000 CB 12.01∼13.00 〃 70 〃 〃 〃 30,000 CB 13.01∼14.00 〃 〃 150 〃 〃 34,000 70(先ムク) 〃 16.0(h7) 8 28,680 **CB 14.01∼14.50 +0.005 0 CB 14.51∼15.00 〃 〃 〃 〃 〃 30,070 CB 15.01∼15.50 〃 〃 〃 〃 〃 31,170 CB 15.51∼16.00 〃 〃 〃 〃 〃 32,430 CB 16.01∼16.50 〃 〃 160 20.0(h7) 〃 33,980 CB 16.51∼17.00 〃 〃 〃 〃 〃 35,820 CB 17.01∼17.50 〃 〃 〃 〃 〃 37,190 CB 17.51∼18.00 〃 〃 〃 〃 〃 38,910 CB 18.01∼18.50 〃 〃 〃 〃 〃 40,250 CB 18.51∼19.00 〃 〃 〃 〃 〃 41,590 CB 19.01∼19.50 〃 〃 〃 〃 〃 42,490 CB 19.51∼20.00 〃 〃 〃 〃 〃 44,220 0.001mmとびの指定も製作させて頂きます。 Reamers in 0.001mm increments are also available. *φ0.90mm∼φ14.00mm迄はソリッドタイプです。 **φ14.01mm∼φ20.00mmは先ムクタイプです。 *φ0.90mm∼φ14.00mm:Solid carbide type. **φ14.01mm∼φ20.00mm:Solid-Head carbide type. − 15 − 超 硬 K10 アルミ合金・鋳鉄用 for Aluminum and cast iron 超硬リーマ Aシリーズ 商品コード:CA○.○○○ 0.005mmとび A Series Aシリーズの特長 Features of A Series アルミ・鋳物用として、特に精度・耐久性を大幅にアップさせる為、二段喰付きにして一次切 削中に荒切削と仕上切削に分けて加工させることにより、高精度な穴仕上が可能になります。 Have been modified particularly for aluminum and cast iron. Double chamfer for drastically improving accuracy and durability. High-precision reaming is possible by machining in two stages (roughing and finishing) during primary stage cutting. ■加工データ Techniqul data. ■ 真円度測定 ■ 表面粗さ測定 ■ Test result of the roundness ■ Test result of the surface roughness Y 10μm 5μm X 被 削 材:FCD500 Workpiece:FCD500 0.5 1.0 1.5 2.0mm 切削条件 (P.2・3参照) − 16 − 6.25μm 超硬リーマ Aシリーズ寸法表 (φ0.300mm∼φ2.905mm形状) (φ0.300mm-φ2.905mm dia. shape) A Series Specification tables (φ2.910mm∼φ12.100mm形状) (φ2.910mm-φ12.100mm dia. shape) シャンク径公差:φd+0.010 +0.005 喰付部詳細 Detail of Chamfer シャンク径公差:h7公差 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 刃 数 Number of Flute 標準定価 Retail Price CA 0.300∼0.395 CA 0.400∼0.405 CA 0.410∼0.495 CA 0.500∼0.505 CA 0.510∼0.595 CA 0.600∼0.605 CA 0.610∼0.695 CA 0.700∼0.705 CA 0.710∼0.795 CA 0.800∼0.895 CA 0.900∼0.995 CA 1.000∼1.005 CA 1.010∼1.305 CA 1.310∼1.495 CA 1.500∼1.505 CA 1.510∼1.995 CA 2.000 CA 2.005 CA 2.010∼2.505 CA 2.510∼2.595 CA 2.600∼2.905 CA 2.910∼3.000 CA 3.005 CA 3.010∼3.505 CA 3.510∼3.595 CA 3.600∼4.000 CA 4.005 CA 4.010∼4.505 CA 4.510∼4.595 CA 4.600∼5.000 CA 5.005 CA 5.010∼5.505 CA 5.510∼5.595 CA 5.600∼6.000 CA 6.005 CA 6.010∼6.595 CA 6.600∼7.000 CA 7.005 CA 7.010∼7.595 CA 7.600∼8.000 CA 8.005 CA 8.010∼8.595 CA 8.600∼9.000 CA 9.005 CA 9.010∼9.500 CA 9.505∼10.000 CA 10.005 CA 10.010∼11.000 CA 11.005 CA 11.010∼12.000 CA 12.005∼12.100 4 〃 5 〃 6 〃 10 〃 12 〃 〃 〃 15 16 〃 18 〃 〃 20 〃 〃 27 〃 〃 〃 〃 〃 30 〃 〃 〃 〃 〃 〃 〃 35 〃 〃 〃 〃 〃 40 〃 〃 〃 〃 〃 〃 〃 45 〃 50 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 60 〃 〃 〃 〃 〃 70 〃 〃 〃 80 〃 〃 〃 〃 〃 〃 〃 〃 〃 90 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.0 突出しセンタ 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.5 〃 〃 2 〃 〃 2.5 3.0 〃 3.0 穴センタ 〃 3.5 4.0 〃 〃 4.5 5.0 〃 〃 5.5 6.0 〃 〃 7.0 〃 〃 8.0 〃 〃 9.0 〃 〃 10.0 〃 〃 11.0 〃 12.0 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 11,210 09,230 09,230 08,000 08,000 06,930 06,930 06,000 06,000 05,390 04,470 03,700 03,700 03,700 03,540 03,540 03,390 04,000 04,000 04,000 04,470 04,470 05,080 05,080 05,080 05,230 05,850 05,850 05,850 06,310 07,230 07,230 07,230 07,540 08,930 08,930 10,770 12,310 12,310 14,160 16,160 16,160 18,310 20,000 20,000 22,310 26,160 26,160 30,470 30,470 35,270 型式・刃径φD Diameter 0.001mmとびの指定も製作させて頂きます。 Reamers in 0.001mm increments are also available. 各種コーティング品も製作させて頂きます。 Coated Reamers are also available. − 17 − 一般被削材/高速・深穴加工用 for High-Speed use and Deep Holes 超硬リーマ Hシリーズ 商品コード:CH○.○○ 0.01mmとび H Series 意匠登録出願済 出願番号 昭.61-3615-7 Pat.pending:Japanese patent Showa 61-3615-7 Hシリーズの特長 Features of H Series ① 切削速度が他のリーマと比較して50%アップ可能です。 ② 深穴加工に最適……首下が長い ③ 切粉前方排出抜群……左30°捻れ ① Cutting speeds 50% higher than other reamers possible ② Suitable for Cutting a Deep Hole Due to a longer Body Length ③ Excellent Chip Forwarding Flow due to Helical Flutes Hシリーズの推奨切削条件 Recommended Cutting Conditions ①回転数は下図を参照の上定めて下さい。 ②リーマ代はφ0.1∼φ0.6mmでご使用下さい。 ③送りは、通常0.005∼0.9mm/rev以下でご使用下さい。 ① Refer to the table below before determining the cutting speed (min−1). ② Use at a removal amount finishing allowance to φ0.1∼φ0.6mm. ③ Normally use by feed of 0.005∼0.9mm/rev or less. 切削条件 (P.2・3参照) − 18 − 超 硬 K10 H Series Specification tables 超硬リーマ Hシリーズ寸法表 (φ1.00mm∼φ4.10mm形状) (φ1.00mm∼φ4.10mm dia shape) ネック径:φ1.00mm∼φ1.99mmはφDと同径 φ2.00mm∼φ4.10mmはφD−0.15mm 刃径φD Diameter 喰付長さT Chamfer Length φ1.00∼φ2.10 2.0mm φ2.11∼φ5.10 3.0mm φ5.11∼φ16.00 5.0mm (φ4.11mm∼φ16.0mm) ネック径:φDとφdの細い方から−0.1mm シャンク径公差 φ1.99以下はφd+0.005∼+0.010 φ2.00以上はh7公差 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 型式・刃径φD Diameter (呼び寸法) 単価:円/1本 unit : yen/1pce 標準定価 Retail Price 刃 長 R1 Flute Length 全 長 L Overall Length 首下長R2 Body Length シャンク径φd Shank Diameter 刃 数 Number of Flute 0.1mmとび 0.01mmとび CH 1.00 8 46 15 1.0突出しセンタ 3 23,200 − CH 1.01∼1.49 10 〃 〃 1.5 4 23,200 27,840 CH 1.50 〃 〃 〃 〃 〃 15,480 − CH 1.51∼1.99 〃 〃 〃 2.0 〃 15,480 18,560 CH 2.00∼2.10 〃 55 30 〃 〃 10,310 12,370 CH 2.11∼2.60 15 60 35 2.5 〃 10,310 12,370 CH 2.61∼3.10 〃 〃 〃 3.0 〃 10,310 12,370 CH 3.11∼3.60 20 〃 〃 3.5 〃 10,310 12,370 CH 3.61∼4.10 〃 〃 〃 4.0 〃 08,290 09,950 CH 4.11∼4.60 〃 75 45 4.5穴センタ 〃 08,290 09,950 CH 4.61∼5.10 〃 〃 〃 5.0 〃 08,290 09,950 CH 5.11∼5.60 25 100 65 5.5 〃 08,290 09,950 CH 5.61∼6.10 〃 〃 〃 6.0 〃 07,060 08,470 CH 6.11∼6.60 〃 110 70 6.5 〃 07,060 08,470 CH 6.61∼7.10 〃 〃 〃 7.0 〃 07,060 08,470 CH 7.11∼7.60 30 125 85 7.5 〃 07,060 08,470 CH 7.61∼8.10 〃 〃 〃 8.0 〃 08,520 10,220 CH 8.11∼8.60 〃 135 90 8.5 〃 08,520 10,220 CH 8.61∼9.10 〃 〃 〃 9.0 〃 09,770 11,720 CH 9.11∼9.60 35 150 100 9.5 〃 09,770 11,720 CH 9.61∼10.10 〃 〃 〃 10.0 〃 10,600 12,720 CH 10.11∼10.60 〃 155 105 10.5 〃 13,710 16,450 CH 10.61∼11.10 〃 〃 〃 11.0 〃 15,170 18,200 CH 11.11∼11.60 〃 160 〃 11.5 〃 16,200 19,440 CH 11.61∼12.10 〃 〃 〃 12.0 〃 16,200 19,440 CH 12.11∼12.60 40 165 110 12.5 〃 17,250 20,700 CH 12.61∼13.10 〃 〃 〃 13.0 〃 18,910 22,690 CH 13.11∼13.60 〃 170 115 13.5 〃 22,430 26,920 CH 13.61∼14.10 〃 〃 〃 14.0 6 24,310 29,170 CH 14.11∼14.60 45 175 120 14.5 〃 26,580 31,900 CH 14.60∼15.10 〃 〃 〃 15.0 〃 29,080 34,900 CH 15.11∼15.60 〃 180 125 15.5 〃 32,620 39,140 CH 15.61∼16.00 〃 〃 〃 16.0 〃 35,720 42,860 0.001mmとびの指定も製作させて頂きます。 Reamers in 0.001mm increments are also available. φ0.80∼φ0.99も製作させて頂きます。 φ0.80-φ0.99 is also available. − 19 − 高硬度用 for P 超 硬 Coating 超微粒子 difficult-to-cut materials HRC60 超硬リーマ Rシリーズ 商品コード:CR○.○○ 0.01mmとび R Series パープルコーティング 「Purple Coating」 登録商標 第4202221号 Rシリーズの特長 Features of R Series ① 高硬度鋼用パープルコーティングと右リードの刃形状により、 焼入れ硬度HRC60前後切削可能。 ② シャンク径はエンドミルシャンクを採用。 ① Right hand spiral blade and F.P. patented "Purple Coating" make cutting of quenched steel, approximate hardness HRC60, possible. Purple Coating is our original and specially deigned for cutting of very hard material. ② Size of shank diameter is the same as that of standard end mill shank diameter. Rシリーズの推奨切削条件 Recommended Cutting Conditions ●注 拡大代推移 ① 回転数及び送りは下図を参照下さい。 ② リーマ代はφ0.05mm∼0.30mm以下でご使用 ください。 ① Refer to the table before determining the cutting speed (min−1) and a feed. 被削材:SKD11(HRC60) Matelial : SKD11(HRC60) ※被削材、切削条件により異なります。 ※Cutting date is influenced by Work pieces and cutting condifion. ② Use at a removal amount to φ0.3mm or less. 切削条件 (P.2・3参照) 回転数(min−1) 刃径φD Diameter HRC60 HRC55 1.00 3200 3500 2.00 1600 1800 3.00 1060 1170 4.00 795 875 5.00 640 700 6.00 530 580 7.00 455 500 8.00 400 440 9.00 355 390 10.00 335 360 11.00 310 340 12.00 300 330 送り(mm/rev) Feed (min−1) ∼0.1 1,500 HRC55 1,000 0.05∼0.35 500 HRC60 2 周速 10m/min∼12m/min Cutting Speed − 20 − 4 6 8 10 12(φmm) R Series Specification tables 超硬リーマ Rシリーズ寸法表 ■加工データ Techniqul data. ■ 表面粗さ測定 ■ 真円度測定 ■ Test result of the surface roughness ■ Test result of the roundness 10μm 5μm 被 削 材:SKD11 Workpiece:SKD11 HRC62(hardness unit) 0.5 1.0 1.5 2.0μm (φ1.00mm∼φ2.90mm形状) (φ1.00mm∼φ2.90mm dia shape) シャンク径公差:φd+0.010 +0.005 (φ2.91mm∼φ12.10mm形状) (φ2.91mm∼φ12.10mm dia shape) 刃径φD Diameter 喰付長さB Chamfer Length(mm) φ1.00∼φ5.00 ∼0.5mm φ5.01∼φ12.10 1.0mm ※右ネジレ シャンク径公差:h7公差 刃径公差(Tolerance)φD=0∼+0.007mm 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 刃 数 Number of Flute 0.1mmとび 0.01mmとび CR 1.00 CR 1.01∼1.50 CR 1.51∼1.99 CR 2.00 CR 2.01∼2.50 CR 2.51∼2.90 CR 2.91∼3.00 CR 3.01∼3.50 CR 3.51∼4.00 CR 4.01∼4.50 CR 4.51∼5.00 CR 5.01∼5.50 CR 5.51∼6.00 CR 6.01∼6.50 CR 6.51∼7.00 CR 7.01∼7.50 CR 7.51∼8.00 CR 8.01∼8.50 CR 8.51∼9.00 CR 9.01∼9.50 CR 9.51∼10.00 CR 10.01∼10.50 CR 10.51∼11.00 CR 11.01∼11.50 CR 11.51∼12.10 15 〃 25 〃 30 35 40 〃 〃 〃 〃 50 〃 〃 〃 〃 〃 60 〃 〃 〃 65 〃 〃 〃 50 〃 60 〃 70 〃 80 〃 〃 〃 〃 100 〃 〃 〃 〃 〃 115 〃 〃 〃 〃 〃 130 〃 1.0突出センタ 1.5 2.0 〃 2.5 3.0 3.0穴センタ 4.0 〃 6.0 〃 〃 〃 8.0 〃 〃 〃 10.0 〃 〃 〃 12.0 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 12,940 11,500 10,440 9,490 8,980 8,290 6,890 7,840 8,080 9,030 9,680 11,140 11,590 13,510 14,590 17,840 19,460 21,080 26,220 28,380 29,460 30,540 31,080 32,430 34,590 ── 13,600 12,340 ── 9,880 9,120 9,120 8,620 8,890 9,930 10,650 12,250 12,750 14,860 16,050 19,620 21,410 23,190 28,840 31,220 32,410 33,590 34,190 35,680 38,050 型式・刃径φD Diameter − 21 − 標準定価 Retail Price ステンレス・難削材用 for Stainless steel and difficult-to-cut materials サーメットリーマ Sシリーズ サーメット 商品コード:CS○.○○ 0.01mmとび S Series サーメット材使用 Material : Cermet 不等分割刃 Uneven graduation Sシリーズの特長 Features of S Series ① 窒素含有サーメット材を使用している為、耐溶着性に優れ、ステンレスその他の難削材で も抜群の仕上面(面粗度)が得られ且つ従来低速であったステンレス鋼に対しても高速仕 上加工が可能です。 ② 難削材に対して不等分割を採用している為真円度及び面粗度が優れています。 ① Superior long life to prevent from built-up edge by using cermet. ② Excellent roundness due to uneven graduation and roughness for difficult-to-cut materials. Sシリーズの推奨切削条件 Recommended Cutting Conditions ① 回転数は下図を参照の上定めて下さい。 ② リーマ代はφ0.1∼φ0.3mmでご使用下さい。 ③ 送りは、通常0.005∼0.3mm/rev以下でご使用下さい。 ① Refer to the table below before determining the cutting speed (min−1). ② Use at a removal amount to φ0.1∼φ0.3mm. ③ Normally use at a feed of 0.005∼0.3mm/rev or less. 切削条件 (P.2・3参照) − 22 − サーメットリーマ Sシリーズ寸法表 刃径公差(Tolerance)φD=0∼+0.005mm(J5) S Series Specification tables 刃径φD Diameter 喰付長さB Chamfer Length φ2.90∼φ5.00 0.5mm φ5.01∼φ8.00 0.8mm φ8.01∼φ10.00 1.0mm 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length シャンク径φd Shank Diameter 刃 数 Number of Flute 0.1mmとび 0.01mmとび CS 2.90∼3.00 25 60 3.0 4 07,260 08,710 CS 3.01∼3.50 〃 〃 3.5 〃 07,890 09,470 CS 3.51∼4.00 〃 〃 4.0 〃 08,650 10,380 CS 4.01∼4.50 30 70 4.5 〃 09,630 11,560 CS 4.51∼5.00 〃 〃 5.0 〃 10,450 12,540 CS 5.01∼5.50 〃 〃 5.5 6 11,250 13,500 CS 5.51∼6.00 〃 〃 6.0 〃 12,200 14,640 CS 6.01∼6.50 35 80 6.5 〃 14,560 17,470 CS 6.51∼7.00 〃 〃 7.0 〃 15,750 18,900 CS 7.01∼7.50 〃 〃 7.5 〃 16,990 20,390 CS 7.51∼8.00 〃 〃 8.0 〃 18,450 22,140 CS 8.01∼8.50 〃 〃 8.5 〃 20,000 24,000 CS 8.51∼9.00 〃 〃 9.0 〃 21,400 25,680 CS 9.01∼9.50 〃 〃 9.5 〃 23,150 27,780 CS 9.51∼10.00 〃 〃 10.0 〃 24,960 29,950 型式・刃径φD Diameter ※φ1.00∼φ2.89mmは特注にて製作させて頂きます。 0.001mmとびの指定も製作させて頂きます。 標準定価 Retail Price Reamers which diameters are φ1.00-φ2.89mm are not standard, but special order. Reamers in 0.001mm increments are also available. − 23 − 精密微細穴 加工用ドリル for miniature precision hole , ドリーマー D reamer 商品コード:D R○.○○(φ3.0シャンク) DM○.○○(φ1.0シャンク) 超硬ミニチュア リーマ型 ドリル 0.01mmとび ×25 最小径φ0.05mm! ! Minimum Dia 0.05mm 商標登録出願 第2003-077138 特 長 Features ① 精密微細穴仕上加工用ドリル …リーマ専業メーカーの技術とノウハウにより開発。 ② 幅広い加工領域 …………………あらゆる被削材に対して、従来の高速での加工はもとより、 超低速回転域でも加工可能です。 ③ 優れた耐久性 ……………………工具素材は極超微粒子超硬合金。工具剛性は抜群です。 ④ 高 精 度 ………………………刃径シャンク径許容差:0/−0.003mm , ① For microscopic Precion Hole processing Drill Developted by the specialist Reamers maker technque and know how. ② Wide range fieid cutting speed processing reamer, against all materials usable for both high speed prossecing and also for very low speed prossecing. ③ Excellent durability Tool is made from very small particle matelials with excellent elasticity. ④ High accuracy Flute and Shank Diameter : 0/-0.003 切削条件 Cutting Conditions 回転数(min-1) 刃径φD 0.05 0.1 0.2 0.3 2000 2000 2000 2000 S45C ∼030000 ∼028000 ∼015000 ∼010000 2000 2000 2000 2000 送り速度(μm/rev.) 刃径φD S45C 0.05∼0.3 1 ∼ 10 1 SCM ∼030000 ∼025000 ∼013000 ∼009000 SUS304 1000 ∼019000 1000 ∼010000 1000 ∼005000 1000 ∼003000 アルミ合金 (A/ADC) 2000 ∼ 50000 2000 ∼ 40000 2000 ∼ 20000 2000 ∼ 14000 SUS304 0.5 ∼ 2 アルミ合金 (A/ADC) 1 ∼ 10 SCM ∼ 10 ご使用上の注意 Attention ① 3D以上の加工を行う際は、5∼10μm間隔でステップ加工を行って下さい。 ② 機械装着時における工具の振れは、可能な限り抑えて下さい。 ③ ご使用になる機械のスピンドルの回転が最も安定する状態でお使い下さい。 ④ 開封時など、工具の取り扱いには十分ご注意下さい。 ① ② ③ ④ For more than 3 times Dia. Processing, 5-10μm diatance step processing is necessary. , When you fitting it on the machine, be sure it won t swing (less than 2μm is recommended) Be sure that the spindle of the machine that you used is on the stable condition. , Be careful when you unseal it. Be suffeciently careful of the tool s usage. − 24 − 超 硬 超微粒子 , ドリーマー D reamer φ3.0シャンク寸法表 φ0.05∼0.09mm形状 , D reamer Shank Dia. 3.0 Specification tables φ0.10∼0.30mm形状 単価:円/1本 unit:yen / 1 pce 型式・刃径φD 公 差 Diameter tolerance DR 0.05 DR 0.06 DR 0.07 DR 0.08 DR 0.09 DR 0.10 DR 0.11 DR 0.12 DR 0.13 DR 0.14 DR 0.15 DR 0.16 DR 0.17 DR 0.18 DR 0.19 DR 0.20 DR 0.21 DR 0.22 DR 0.23 DR 0.24 DR 0.25 DR 0.26 DR 0.27 DR 0.28 DR 0.29 DR 0.30 0/−0.003 溝 長 R Flute Length 0.5 〃 〃 〃 〃 1.0 〃 〃 〃 〃 1.5 〃 〃 〃 〃 2.0 〃 〃 〃 〃 2.5 〃 〃 〃 〃 3.0 全 長 L Overall Length 40.0 − 25 − シャンク径φd/公差 Shank Diameter Torelance 標準定価 Retail Price φ3.0 0/−0.003 9,250 7,970 6,680 4,830 4,120 3,000 3,000 3,000 3,000 3,000 2,850 2,850 2,850 2,850 2,850 2,770 2,770 2,770 2,770 2,770 2,770 2,770 2,770 2,770 2,770 2,770 , ドリーマー D reamer φ1.0シャンク寸法表 φ0.05∼0.09mm形状 , D reamer Shank Dia. 1.0 Specification tables φ0.10∼0.30mm形状 単価:円/1本 unit:yen / 1 pce 型式・刃径φD 公 差 Diameter tolerance DM 0.05 DM 0.06 DM 0.07 DM 0.08 DM 0.09 DM 0.10∼0.14 DM 0.15∼0.19 DM 0.20∼0.24 DM 0.25∼0.29 DM 0.30 0/−0.003 溝 長 R Flute Length 全 長 L Overall Length 0.5 〃 〃 〃 〃 1.0 1.5 2.0 2.5 3.0 40.0 シャンク径φd/公差 Shank Diameter Torelance 標準定価 Retail Price φ1.0 0/−0.003 9,250 7,970 6,680 4,830 4,120 3,000 2,850 2,770 2,770 2,770 , D reamer前加工用揉付工具(ダイヤモンド工具) F.P.ポイント・セッター 商品コード:PS ° φ1.0 55 φ3.0 0 −0.010 F.P. Diamond Point Setter , * D reamerをより精度良く穴あけ加工するた めの位置決め工具です。 * 1本で0.05∼0.30mmまで全てのサイズに対 応できます。 0.5 10 20 30 * For the best hole accuracy, Point Setter is useful before the drilling process. * Point Setter can cover all of the size description of , D reamer, from 0.05 to 0.30mm Dia. − 26 − ハイスリーマ被削材別推奨切削条件 被 削 材 Workpiece 軟 鋼 (SS) Mild Steel 炭 素 鋼 (SxxC) Carbon Steel 合 金 鋼 (SCM/SUJ) Alloy Steel 工 具 鋼 (SKH/SKD) Tool Steel 周速V Cutting Speed (m/min) 送 り Feed (mm/rev) リーマ代 Removal Amount (mm) 6∼15 0.03∼0.2 0.1∼0.2 ハイ・ヘリカルリーマ 10∼15 0.1∼0.2 0.2∼0.3 F.P.ゴールドリーマ 10∼25 0.05∼0.2 0.1∼0.2 3∼10 0.03∼0.15 0.1∼0.2 12∼25 0.1∼0.2 0.2∼0.3 6∼20 0.05∼0.2 0.1∼0.2 3∼6 0.03∼0.15 0.1∼0.2 10∼20 0.1∼0.2 0.2∼0.3 6∼20 0.05∼0.2 0.1∼0.2 3∼4 0.03∼0.15 0.1∼0.2 ハイ・ヘリカルリーマ 8∼12 0.1∼0.2 0.2∼0.3 F.P.ゴールドリーマ 5∼10 0.05∼0.2 0.1∼0.2 3∼4 0.03∼0.15 0.1∼0.2 5∼10 0.05∼0.2 0.1∼0.2 4∼8 0.03∼0.15 0.1∼0.2 12∼20 0.1∼0.2 0.2∼0.3 6∼15 0.05∼0.2 0.1∼0.2 DLCリーマ 15∼30 0.05∼0.2 0.1∼0.2 ハンドリーマ 10∼20 0.03∼0.2 0.1∼0.2 ハイ・ヘリカルリーマ 12∼20 0.1∼0.2 0.2∼0.3 F.P.ゴールドリーマ 10∼30 0.05∼0.2 0.1∼0.2 ハンドリーマ 10∼20 0.03∼0.2 0.1∼0.2 12∼20 0.1∼0.2 0.2∼0.3 F.P.ゴールドリーマ 10∼30 0.05∼0.2 0.1∼0.2 DLCリーマ 10∼20 0.05∼0.2 0.1∼0.2 ハンドリーマ 8∼15 0.03∼0.2 0.1∼0.2 ハイ・ヘリカルリーマ 10∼18 0.1∼0.2 0.2∼0.3 F.P.ゴールドリーマ 10∼25 0.05∼0.2 0.1∼0.2 3∼4 0.03∼0.15 0.1∼0.15 適用リーマ Applicable Reamer ハンドリーマ ハンドリーマ F.P.ゴールドリーマ ハンドリーマ 12.5 小 12.5 小 大 ハイ・ヘリカルリーマ F.P.ゴールドリーマ ハンドリーマ 12.5 小 大 鋳 鉄 ハンドリーマ ア ル ミ 拡 大 代 大 ハイ・ヘリカルリーマ ハンドリーマ Cast Iron 面粗度Ry Surface Roughness (μm) 大 ステンレス (SUS) Stainless steel (FC/FCD) High Speed Steel Reamer Recommended Cutting Conditions 6.3 小 6.3 F.P.ゴールドリーマ 大 ハイ・ヘリカルリーマ F.P.ゴールドリーマ 6.3 小 1.6 (A/ADC) Aluminum 樹 脂 系 銅 合 金 小 大 (複合材料を除く) ハイ・ヘリカルリーマ Resin 大 6.3 小 12.5 小 1.6 大 (C) Copper Alloy ハンドリーマ 調質鋼∼HRC40 6.3 小 大 6.3 F.P.ゴールドリーマ 5∼10 0.03∼0.15 0.08∼0.15 小 1. 上記推奨条件は目安となる数値です。調質の度合いやワーク形状、加工環境に合わせて適正化して下さい。 The cutting condition mentioned above is not the absolute condition, but just a recommendation. Please refer your circumstances of cutting condition and materials. 2. 工具やワークは確実に保持して下さい。特に、工具の振れには十分な注意が必要です。 Please cramp the tool and workpiece certainly. Especially, taking notice of the runout of the tool is important. DLCリーマ P.28∼ F.P.ゴールドリーマ P.30∼ ハンドリーマ − 27 − P.32∼ ハイ・ヘリカルリーマ P. 36∼ H.S.S. アルミ合金・銅加工用 for Aluminum and Copper Alloy DLCリーマ DLC Coating 商品コード:HD○.○○○ 0.005mmとび DLC Reamers 高精度加工対応 刃径公差(Tolerance)φD=0∼+0.005mm ストレート刃 Straight flutes End-mill Shank DLCリーマの特長 Features of DLC Reamers DLCコーティングにより、抜群の耐摩耗性と耐溶着性を実現。アルミや銅の加工において特に 威力を発揮します。また、低摩擦係数の為、水溶性切削油での加工が可能です。 DLC(Diamond Like Carbon) coating makes reamer less adhesive to work-piecec while protecting it from wear. It is especially suitable for aliminum. Water-soluble cutting oil can be applied due to low friction coefficient. DLCリーマの加工事例 Technical Date 周 速 Cutting Speed 送り速度 Feed 被削材 Workpiece アルミニウム アルミ合金 A/ADC 銅 Copper Alloy 刃径(mm) Diameter 周速(m/min) Cutting Speed 15∼30 10∼20 送り速度 (mm/rev) 0.01∼0.05 0.05∼0.1 0.05∼0.1 0.08∼0.25 0.1∼0.3 0.15∼0.35 Feed リーマ代 (mm) Removal Amount ●加工データ 1 0.1 3 0.2 6 8 0.2 10 0.3 0.3 12 0.3 被削材:A7075(アルミ合金) 使用リーマ HD6.000 周 速 20m/min 回 転 数 1,060min 送 り 量 0.08mm/rev リーマ代 0.2mm 加 工 長 20mm貫通 切 削 油 水溶性油剤 -1 2.5 面 粗 度 Ry ︵ μ m ︶ HD6.000 ノンコート6.000 2.0 1.5 1.0 0.5 0 100 200 300 加工穴数 400 500 4 HD6.000 ノンコート6.000 拡 2 大 代 ︵ 0 μ m -2 ︶ -4 100 切削条件 (P.27参照) − 28 − 200 300 加工穴数 400 500 DLC Reamers Specification tables DLCリーマ寸法表 (φ1.000mm∼φ2.895mm形状) (φ1.000mm∼φ2.895mm dia shape) (φ2.900mm∼φ14.100mm形状) (φ2.900mm∼φ14.100mm dia shape) 刃径φD Diameter 喰付長さB Chamfer Length φ1.000∼φ5.000 ∼0.5mm φ5.005∼φ8.000 0.8mm φ8.005∼φ14.100 1.0mm 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce 標準定価 Retail Price (呼び寸法) 刃長R1 Flute Length 全 長 L Overall Length 首下長R2 Body Length シャンク径φd Shank Diameter 刃 数 Number of Flute HD 1.000∼1.495 20 40 − 3.0 4 5,120 5,460 6,150 HD 1.500∼1.695 22 45 − 〃 〃 − 5,460 6,150 HD 1.700∼1.895 25 50 − 〃 〃 − 5,460 6,150 HD 1.900∼1.995 30 60 − 〃 〃 − 5,460 6,150 HD 2.000∼2.395 〃 〃 − 〃 〃 4,560 4,830 5,390 HD 2.400∼2.895 35 65 − 〃 〃 − 4,830 5,390 型式・刃径φD Diameter 1.0mmとび 0.1mmとび 0.005mmとび HD 2.900∼3.000 40 70 50 〃 6 4,100 4,830 5,390 HD 3.005∼3.500 〃 75 〃 4.0 〃 − 5,370 5,830 HD 3.505∼4.000 〃 80 〃 〃 〃 5,150 5,370 5,830 HD 4.005∼4.500 45 85 55 6.0 〃 − 5,340 5,800 HD 4.505∼5.000 〃 90 〃 〃 〃 5,120 5,340 5,800 HD 5.005∼5.500 〃 95 60 〃 〃 − 5,340 5,800 HD 5.505∼6.000 50 100 65 〃 〃 5,460 5,340 5,800 HD 6.005∼6.500 〃 〃 〃 8.0 〃 − 6,200 6,730 HD 6.505∼7.000 55 105 70 〃 〃 6,000 6,070 6,610 HD 7.005∼7.500 〃 110 〃 〃 〃 − 6,290 6,850 HD 7.505∼8.000 60 115 75 〃 〃 6,490 6,290 6,850 HD 8.005∼8.500 〃 120 〃 10.0 〃 − 7,290 7,980 HD 8.505∼9.000 65 125 80 〃 〃 7,490 7,290 7,980 HD 9.005∼9.500 〃 〃 〃 〃 〃 − 7,880 8,630 HD 9.505∼10.000 70 130 85 〃 〃 7,830 7,880 8,630 HD 10.005∼10.500 〃 135 〃 12.0 〃 − 8,320 9,170 HD 10.505∼11.000 75 140 90 〃 〃 8,800 8,320 9,170 HD 11.005∼11.500 〃 145 95 〃 〃 − 8,930 9,880 HD 11.505∼12.000 〃 150 〃 〃 〃 9,320 8,930 9,880 HD 12.005∼12.500 80 155 100 16.0 8 − 9,540 10,600 HD 12.505∼13.000 〃 160 〃 〃 〃 10,600 10,700 11,760 HD 13.005∼13.500 85 165 105 〃 〃 − 12,710 13,850 HD 13.505∼14.000 〃 〃 〃 〃 〃 13,000 12,710 13,850 HD 14.005∼14.100 〃 〃 〃 〃 〃 − 13,560 14,850 ※当社在庫無く、代理店在庫商品です。 Non-Inventory Item. Make To-Order Production. − 29 − H.S.S. 高耐久性 Long Tool Life TiN Coating 商品コード:HG○.○○○S(ストレート) :HG○.○○○S(スパイラル) F.P.ゴールドリーマ F.P. Gold Reamers 0.005mmとび ストレート刃 Straight flutes End-mill Shank スパイラル刃 Spiral flutes End-mill Shank 加工コスト削減! ! ハイスマシン、チャッキングリーマに比べ工具寿命は約2倍。その上価格は、約半値と超低価格(当社比) Reduction of producing cost is possible. Twice Longer tool life is available compare with Non coated HSS Reamer. About twice less expensive than HSS Machine Reamer and HSS Chucking Reamer. F.P.ゴールドリーマの特長 Features of F.P. Gold Reamers ① TiNコーティングを施している為、従来のハイスマシン、チャッキングリーマに比べて切 削速度及び耐久力が2倍以上。 ② 真円度及び面粗度抜群。 ③ シャンク径はエンドミルシャンクを採用。 ① Comparing to our conventional High-Speed-Steel Reamer, cutting speed and endurance are two times. ② Excellent roundness and surface roughness obtainable. ③ Having the end-mill shank. F.P.ゴールドリーマの加工事例 Technical Date 耐久力比較テスト Durability comparison ●注 拡大代推移(100穴目ゼロ基準) ハイスリーマ High Speed Steel Reamer F.P. ゴールド F.P. Gold 0 500 1000 1500 2000 穴 数 切削条件 (P.27参照) リーマ Reamer F.P. ゴールド F.P. Gold ハイスリーマ High Speed Steel Reamer 刃径φD Diameter 加工長 mm Depth length 周速 m/min Cutting Speed 送り mm/rev Feed リーマ代 mm Removal Amount φ6.000 φ6.000 10貫通 10貫通 12 6 0.2 0.2 0.2 0.2 (被削材:S45C, Workpiece : S45C)(当社比) ハイスリーマは、1000穴を越えると穴径の収縮が大きくなる。それに対しF.P.ゴールドリ ーマは2000穴以上安定した穴径を保つ。 Tool life of non coated HSS Reamer is supposed to be less than 1,000 holes cutting. However, more than 2,000holes cutting is supposed to be possible by using TIN coated Reamer, F.P. Gold Reamer. ※被削材、切削条件により異なります。 ※Cutting data is influenced by work pieces and cutting conditions. − 30 − F.P. Gold Reamers Specification tables F.P.ゴールドリーマ寸法表 (φ1.000mm∼φ2.895mm形状) (φ1.000mm∼φ2.895mm dia shape) (φ2.900mm∼φ14.100mm形状) (φ2.900mm∼φ14.100mm dia shape) 刃径φD Diameter 喰付長さB Chamfer Length φ1.000∼φ5.000 ∼0.5mm φ5.005∼φ8.000 0.8mm φ8.005∼φ14.100 1.0mm 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce 標準定価 Retail Price (呼び寸法) 刃長R1 Flute Length 全 長 L Overall Length 首下長R2 Body Length シャンク径φd Shank Diameter 刃 数 Number of Flute HG 1.000∼1.495 20 40 − 3.0 4 3,190 3,510 4,150 HG 1.500∼1.695 22 45 − 〃 〃 − 3,510 4,150 HG 1.700∼1.895 25 50 − 〃 〃 − 3,510 4,150 HG 1.900∼1.995 30 60 − 〃 〃 − 3,510 4,150 HG 2.000∼2.395 〃 〃 − 〃 〃 2,640 2,900 3,430 HG 2.400∼2.895 35 65 − 〃 〃 − 2,900 3,430 HG 2.900∼3.000 40 70 50 〃 6 2,200 2,900 3,430 HG 3.005∼3.500 〃 75 〃 4.0 〃 − 2,420 2,860 HG 3.505∼4.000 〃 80 〃 〃 〃 2,200 2,420 2,860 HG 4.005∼4.500 45 85 55 6.0 〃 − 2,420 2,860 HG 4.505∼5.000 〃 90 〃 〃 〃 2,200 2,420 2,860 HG 5.005∼5.500 〃 95 60 〃 〃 − 2,420 2,860 HG 5.505∼6.000 50 100 65 〃 〃 2,530 2,420 2,860 HG 6.005∼6.500 〃 〃 〃 8.0 〃 − 2,780 3,290 HG 6.505∼7.000 55 105 70 〃 〃 2,730 2,780 3,290 HG 7.005∼7.500 〃 110 〃 〃 〃 − 3,000 3,540 HG 7.505∼8.000 60 115 75 〃 〃 3,190 3,000 3,540 HG 8.005∼8.500 〃 120 〃 10.0 〃 − 3,510 4,150 HG 8.505∼9.000 65 125 80 〃 〃 3,690 3,510 4,150 HG 9.005∼9.500 〃 〃 〃 〃 〃 − 4,060 4,800 HG 9.505∼10.000 70 130 85 〃 〃 4,020 4,060 4,800 HG 10.005∼10.500 〃 135 〃 12.0 〃 − 4,420 5,230 HG 10.505∼11.000 75 140 90 〃 〃 4,540 4,420 5,230 HG 11.005∼11.500 〃 145 95 〃 〃 − 4,990 5,910 HG 11.505∼12.000 〃 150 〃 〃 〃 5,020 4,990 5,910 HG 12.005∼12.500 80 155 100 16.0 8 − 5,520 6,520 HG 12.505∼13.000 〃 160 〃 〃 〃 5,410 5,520 6,520 HG 13.005∼13.500 85 165 105 〃 〃 − 5,950 7,040 HG 13.505∼14.000 〃 〃 〃 〃 〃 6,150 5,950 7,040 HG 14.005∼14.100 〃 〃 〃 〃 〃 − 6,770 8,000 型式・刃径φD Diameter 1.0mmとび 0.1mmとび 0.005mmとび ※スパイラル刃は、上記価格の10%UPです。 We also manufacture spiral flute reamers by 10%-up price. ※0.500∼0.995mmも製作させて頂きます。 (ストレート刃のみ) ※0.900∼0.995mmも製作させて頂きます。 (スパイラル刃) 0.500-0.995mm is also available. (straight flute only) 0.900-0.995mm is also available. (spiral flute) − 31 − H.S.S. 商品コード:HR○.○○S(ストレート) :HR○.○○S(スパイラル) ハンドリーマ Hand Reamers 0.01mmとび ハンドリーマの特長 Features of Hand Reamers 当社ハンドリーマは穴径の仕上に使用され、先端喰付部は案内をよくするため僅少の勾配(約 1度)がつけてあります。刃径公差は当社独自の+0.005/0(J5)で、製作しております。 F.P. Brand Hand Reamers are used for finishing the inner part of holes. The chamfers of these reamers have a little taper(1° )for the good guidance on working. The tolerance of diameter is suited for standard tolerance +0.005/0(J5). −ハンドリーマ 寸法表− Hand Reamers Specification tables 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce 標準定価 Retail Price (呼び寸法) 刃 長 R1 Flute Length 全 長 L Overall Length 喰付長さT Chamfer Length シャンク径φd Shank Diameter 刃 数 Number of Flute HR 0.30∼0.39 12 30 1.5 1.5 4 / 6,070 7,890 HR 0.40∼0.49 〃 〃 2 〃 〃 / 5,230 6,810 HR 0.50∼0.59 〃 〃 2.5 2 〃 / 4,110 5,340 HR 0.60∼0.69 〃 〃 〃 〃 〃 / 3,780 4,920 HR 0.70∼0.79 〃 〃 〃 〃 〃 / 3,420 4,440 HR 0.80∼0.89 15 35 3 〃 〃 / 3,190 4,140 HR 0.90∼0.99 20 40 4 〃 〃 / 2,990 3,890 HR 1.00∼1.49 〃 〃 〃 〃 〃 2,780 3,060 3,620 HR 1.50∼1.69 22 45 5 3 〃 − 3,060 3,620 HR 1.70∼1.89 25 50 〃 〃 〃 − 3,060 3,620 HR 1.90∼1.99 30 60 6 〃 〃 − 3,060 3,620 HR 2.00∼2.39 〃 〃 〃 〃 〃 2,370 2,610 3,080 HR 2.40∼2.89 35 65 7 〃 〃 − 2,610 3,080 型式・刃径φD Diameter ・スパイラル刃は、上記価格の10%UPにて製作させて頂きます。 ・スパイラル刃は、φ1.00mm以上からの製作になります。 ・角付は15%アップにて製作させて頂きます。 切削条件 ・0.005mmとびも受注製産にて製作させて頂きます。 (P.27参照) − 32 − 1.0mmとび 0.1mmとび 0.01mmとび We also manufacture spiral flute Reamers by 10%-up price. We also manufacture spiral Reamers 1.00mm over. We also manufacture Square of Reamer Shank by 15% up. Reamers in 0.005mm increments are also available. 超短納期製作 ハンドリーマ Hand Reamers シャンク径φd:刃径φDの小数点第2以下切り捨て シャンク径公差:−0.02mm∼−0.05mm 納期 在庫無き場合でも、午前中の御注文は当日生産出荷。午後の御注文は翌営業日の出荷になります。 尚、対象サイズは、φ2.90mm∼φ14.10mmまで(ストレート刃のみ) In the case of emergency, if we do not have any inventories, it is available to deliver the ones that were ordered noon, also ones ordered afternoon can be delivered next day. However, ones size should be from φ2.90 to φ14.10.(Straight flutes only) −ハンドリーマ 寸法表− Standard Hand Reamers Specification tables 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce 標準定価 Retail Price (呼び寸法) 刃 長 R1 Flute Length 全 長 L Overall Length 喰付長さT Chamfer Length シャンクの長さ Shank R2 Length 刃 数 Number of Flute HR 2.90∼2.99 40 72 8 23 6 − 2,610 3,080 HR 3.00∼3.10 〃 〃 〃 〃 〃 1,960 2,150 2,540 HR 3.11∼3.60 〃 75 〃 26 〃 − 2,150 2,540 HR 3.61∼4.00 〃 80 〃 30 〃 1,960 2,150 2,540 HR 4.01∼4.10 〃 〃 9 〃 〃 − 2,150 2,540 HR 4.11∼4.60 45 85 〃 〃 〃 − 2,150 2,540 HR 4.61∼5.00 〃 90 〃 35 〃 1,960 2,150 2,540 HR 5.01∼5.10 〃 〃 10 〃 〃 − 2,150 2,540 型式・刃径φD Diameter 1.0mmとび 0.1mmとび 0.01mmとび HR 5.11∼5.60 〃 95 〃 38 〃 − 2,150 2,540 HR 5.61∼5.99 50 100 〃 〃 〃 − 2,150 2,540 HR 6.00∼6.60 〃 〃 〃 〃 〃 2,240 2,470 2,920 HR 6.61∼6.99 55 105 11 〃 〃 − 2,470 2,920 HR 7.00∼7.10 〃 〃 〃 〃 〃 2,380 2,620 3,090 HR 7.11∼7.60 〃 110 〃 42 〃 − 2,620 3,090 HR 7.61∼7.90 60 115 〃 〃 〃 − 2,620 3,090 HR 7.91∼7.99 〃 〃 12 〃 〃 − − 3,090 HR 8.00∼8.10 〃 〃 〃 〃 〃 2,770 3,050 3,600 HR 8.11∼8.60 〃 120 〃 45 〃 − 3,050 3,600 HR 8.61∼8.90 65 125 〃 〃 〃 − 3,050 3,600 HR 8.91∼8.99 〃 〃 13 〃 〃 − − 3,600 HR 9.00∼9.60 〃 〃 〃 〃 〃 3,140 3,450 4,080 HR 9.61∼9.90 70 130 〃 〃 〃 − 3,450 4,080 HR 9.91∼9.99 〃 〃 14 〃 〃 − − 4,080 HR 10.00∼10.10 〃 〃 〃 〃 〃 3,370 3,700 4,380 HR 10.11∼10.60 〃 135 〃 50 〃 − 3,700 4,380 HR 10.61∼10.90 75 140 〃 〃 〃 − 3,700 4,380 HR 10.91∼10.99 〃 〃 15 〃 〃 − − 4,380 − 33 − Hand Reamer Specification tables ハンドリーマ寸法表 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 標準定価 Retail Price (呼び寸法) 刃 長 R1 Flute Length 全 長 L Overall Length 喰付長さT Chamfer Length シャンクの長さ Shank R2 Length 刃 数 Number of Flute HR 11.00∼11.10 75 140 15 50 6 3,810 4,190 4,950 HR 11.11∼11.60 〃 145 〃 54 〃 − 4,190 4,950 HR 11.61∼11.99 〃 150 〃 58 〃 − 4,190 4,950 HR 12.00∼12.10 〃 〃 〃 〃 〃 4,370 4,810 5,680 HR 12.11∼12.60 80 155 16 〃 〃 − 4,810 5,680 HR 12.61∼12.99 〃 160 〃 62 8 − 4,810 5,680 HR 13.00∼13.10 〃 〃 〃 〃 〃 4,720 5,190 6,130 HR 13.11∼13.99 85 165 17 〃 〃 − 5,190 6,130 HR 14.00 〃 〃 〃 〃 〃 5,360 − − HR 14.01∼14.10 〃 〃 18 〃 〃 − 5,900 6,970 HR 14.11∼14.60 90 170 〃 〃 〃 − 5,900 6,970 HR 14.61∼14.99 〃 175 〃 66 〃 − 5,900 6,970 型式・刃径φD Diameter 1.0mmとび 0.1mmとび 0.01mmとび HR 15.00 〃 〃 〃 〃 〃 5,690 − − HR 15.01∼15.10 〃 〃 19 〃 〃 − 6,260 7,410 HR 15.11∼15.99 95 185 〃 70 〃 − 6,260 7,410 HR 16.00∼16.10 〃 〃 〃 〃 〃 6,410 7,050 8,330 HR 16.11∼16.99 100 190 20 〃 〃 − 7,050 8,330 9,500 HR 17.00∼17.10 〃 〃 〃 〃 〃 7,300 8,030 HR 17.11∼17.99 105 200 21 75 〃 − 8,030 9,500 HR 18.00∼18.10 〃 〃 〃 〃 〃 8,180 9,000 10,630 HR 18.11∼18.99 〃 210 〃 85 〃 − 9,000 10,630 HR 19.00∼19.10 〃 〃 〃 〃 〃 9,200 10,120 11,960 HR 19.11∼19.99 110 220 22 88 〃 − 10,120 11,960 HR 20.00∼20.10 〃 〃 〃 〃 〃 10,020 11,020 13,020 HR 20.11∼20.99 120 230 24 〃 〃 − 11,020 13,020 HR 21.00 〃 〃 〃 〃 〃 10,610 HR 22.00 〃 235 〃 90 〃 11,480 HR 23.00 130 250 25 95 〃 12,720 HR 24.00 〃 255 〃 100 〃 13,890 HR 25.00 〃 260 〃 102 〃 15,280 HR 26.00 140 270 〃 〃 10 16,810 HR 27.00 〃 290 〃 120 〃 18,570 HR 28.00 〃 〃 〃 〃 〃 20,180 HR 29.00 150 305 〃 〃 〃 21,600 HR 30.00 〃 〃 〃 〃 〃 22,540 HR 31.00 160 315 〃 〃 〃 23,940 HR 32.00 〃 〃 〃 〃 〃 25,690 HR 33.00 〃 〃 〃 〃 〃 27,440 HR 34.00 〃 〃 〃 〃 〃 29,190 HR 35.00 165 320 〃 〃 〃 30,950 HR 36.00 〃 〃 〃 〃 〃 34,440 HR 37.00 〃 325 〃 125 〃 36,660 HR 38.00 〃 〃 〃 〃 〃 38,310 HR 39.00 〃 330 〃 〃 12 42,260 HR 40.00 〃 〃 〃 〃 〃 44,140 ・スパイラル刃は、上記価格の10%upにて製作させて頂きます。 ・0.005mmとびも、受注生産にて製作させて頂きます。 切削条件 (P.27参照) − 34 − φ21.01mm以上の0.1mm, 0.01mmとびは、都度見積とさせ て頂きます。 (最低数量 3本) We also manufacture spiral flute reamers by 10% up price. Reamers in 0.005mm increments are also available. Size tables for Square of Reamer Shank リーマシャンク四角部寸法表 単位:mm unit : mm 長 さ R Square Length シャンク径φd Shank Diameter 寸法 Size 1.0 4 14.7∼16.1 12.0 15 2.0 1.5 5 16.2∼17.1 13.0 16 2.3 1.7 〃 17.2∼18.6 14.0 2.5 1.9 〃 18.7∼20.1 15.0 2.9∼3.1 2.5 〃 20.2∼23.1 17.0 20 3.2∼3.3 2.5 〃 23.2∼25.6 19.0 22 3.4∼3.6 2.8 6 25.7∼28.1 21.0 24 3.7∼4.1 3.2 〃 28.2∼31.1 23.0 26 4.2∼4.6 3.5 〃 31.2∼35.1 26.0 30 7 35.7∼39.1 29.0 32 〃 39.2∼43.1 32.0 シャンク径φd Shank Diameter 寸法 Size 1.5 幅 K 4.7∼5.6 4.0 5.7∼6.1 4.5 Square Width 公差 Tolerance 0 −0.1 幅 K Square Width 公差 Tolerance 0 −0.15 長 さ R Square Length 17 18 35 0 −0.2 6.2∼6.6 5.0 8 43.2∼47.1 35.0 6.7∼7.1 5.5 〃 47.2∼51.1 38.0 42 7.2∼8.1 6.0 9 51.2∼61.1 46.0 50 8.2∼8.6 6.5 〃 61.2∼67.1 50.0 52 8.7∼9.6 7.0 10 67.2∼72.1 54.0 58 9.7∼10.6 8.0 11 72.2∼77.1 58.0 62 10.7∼12.1 9.0 12 12.2∼13.6 10.0 13.7∼14.6 11.0 13 0 −0.15 14 − 35 − 38 高速加工用 for High-Speed H.S.S. ハイ・ヘリカルリーマ 商品コード:HH○.○○ 0.01mmとび Hi-Helical Reamers Straight Shank ハイ・ヘリカルリーマの特長 Features of F.P. HI-Helical Reamers 表面処理により、リーマの切削寿命が向上し、HRC40以下の調質材にも威力を発揮します。 Special surface treatment is applied. It is longer lasting as well as effective on quenched and tempered steels whose hardness HRC40 or less. シャンク径:φDの小数点第2以下切り捨て シャンク径公差:h7 ネック径:φD−0.2mm∼−0.5mm −ストレートシャンク ハイ・ヘリカルリーマ寸法表− Straight shank Hi-Helical reamers specification tables 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 型式・刃径φD Diameter (呼び寸法) HH 1.50∼1.59 HH 1.60∼1.69 HH 1.70∼1.79 HH 1.80∼1.89 HH 1.90∼1.99 HH 2.00 HH 2.01∼2.49 HH 2.50∼2.89 HH 2.90∼2.99 HH 3.00∼3.49 HH 3.50∼4.49 HH 4.50∼5.49 HH 5.50∼6.00 HH 6.01∼6.49 HH 6.50∼7.00 HH 7.01∼7.49 HH 7.50∼8.00 HH 8.01∼8.49 HH 8.50∼9.00 HH 9.01∼9.49 HH 9.50∼10.00 HH 10.01∼10.49 HH 10.50∼11.00 HH 11.01∼11.49 HH 11.50∼12.00 HH 12.01∼12.49 HH 12.50∼13.00 HH 13.01∼13.49 HH 13.50∼14.00 HH 14.01∼14.49 HH 14.50∼15.00 HH 15.01∼15.49 HH 15.50∼16.00 HH 16.01∼16.49 切削条件 (P.27参照) 刃 長 R1 Flute Length 10 〃 〃 〃 〃 〃 15 〃 20 〃 22 25 30 〃 35 〃 〃 〃 40 〃 〃 〃 45 〃 〃 〃 50 〃 〃 〃 〃 〃 〃 〃 全 長 L Overall Length 45 〃 〃 〃 〃 〃 60 〃 70 〃 80 90 100 〃 110 〃 125 〃 135 〃 150 〃 155 〃 160 〃 165 〃 170 〃 175 〃 180 〃 単価:円/1本 unit : yen/1pce 標準定価 Retail Price 喰付長さT Chamfer Length シャンク長R2 Shank Length 刃 数 Number of Flute 0.1mmとび 0.01mmとび 2突出しセンタ 〃 〃 〃 〃 〃 3 〃 3 穴センタ 〃 〃 5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 20 〃 〃 〃 〃 〃 25 〃 〃 〃 〃 30 35 〃 〃 〃 〃 〃 40 〃 〃 〃 45 〃 50 〃 55 〃 〃 〃 〃 〃 〃 〃 2 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 3 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 9,040 8,320 7,720 7,190 6,600 2,930 2,930 2,930 2,930 2,260 2,260 2,260 2,260 2,460 2,460 2,760 2,760 2,930 2,930 3,220 3,220 3,410 3,410 4,590 4,590 4,910 4,910 4,910 4,910 5,800 6,730 8,350 10,250 12,660 10,140 9,340 8,690 8,050 7,400 − 3,520 3,520 3,520 2,710 2,710 2,710 2,710 2,950 2,950 3,320 3,320 3,520 3,520 3,860 3,860 4,100 4,100 5,500 5,500 5,870 5,870 5,870 5,870 6,950 8,110 10,010 12,290 15,210 − 36 − MTハイ・ヘリカルリーマ 商品コード:HH○.○○MT 0.01mmとび MT Hi-Helical Reamers Morse Taper Shank −モールステーパシャンク ハイ・ヘリカルリーマ寸法表− Morse taper shank Hi-Helical reamers specification tables 刃径公差(Tolerance)φD=0∼+0.005mm(J5) 単価:円/1本 unit : yen/1pce (呼び寸法) 刃 長 R Flute Length 全 長 L Overall Length 喰付長さT Chamfer Length シャンクMT Shank MT No. 刃 数 Number of Flute HH 3.00MT∼3.49 HH 3.50MT∼4.49 HH 4.50MT∼5.49 HH 5.50MT∼6.00 HH 6.01MT∼6.49 HH 6.50MT∼7.49 HH 7.50MT∼8.49 HH 8.50MT∼9.49 HH 9.50MT∼10.49 HH 10.50MT∼11.49 HH 11.50MT∼12.49 HH 12.50MT∼13.49 HH 13.50MT∼14.49 HH 14.50MT∼15.49 HH 15.50MT∼16.49 HH 16.50MT∼17.49 HH 17.50MT∼18.49 HH 18.50MT∼19.49 HH 19.50MT∼20.49 HH 20.50MT∼21.49 HH 21.50MT∼22.49 HH 22.50MT∼23.49 HH 23.50MT∼24.49 HH 24.50MT∼25.49 HH 25.50MT∼26.49 HH 26.50MT∼27.49 HH 27.50MT∼28.49 HH 28.50MT∼29.49 HH 29.50MT∼30.49 HH 30.50MT∼31.49 HH 31.50MT∼32.49 HH 32.50MT∼33.49 HH 33.50MT∼34.49 HH 34.50MT∼35.00 HH 36.00MT HH 37.00MT HH 38.00MT HH 39.00MT HH 40.00MT HH 42.00MT HH 44.00MT HH 45.00MT HH 46.00MT HH 48.00MT HH 50.00MT 20 22 25 30 〃 35 〃 40 〃 〃 〃 〃 〃 45 〃 〃 50 〃 〃 〃 〃 〃 〃 〃 〃 60 〃 〃 65 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 70 110 〃 120 130 〃 140 150 160 〃 170 〃 180 〃 200 205 〃 210 〃 220 230 〃 240 250 255 〃 260 〃 270 〃 〃 〃 310 〃 〃 330 〃 〃 〃 〃 335 〃 340 〃 350 385 3 〃 5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 1 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 2 〃 〃 〃 〃 〃 〃 〃 〃 3 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 5 2 〃 3 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 8 〃 〃 〃 型式・刃径φD Diameter φ36.0mm∼φ50.0mmはその都度見積にて製作させて頂きます。 標準定価 Retail Price 0.1mmとび 0.01mmとび 3,920 3,920 3,650 3,650 3,730 3,730 3,890 3,920 4,050 4,290 4,570 5,480 5,820 6,300 7,350 8,110 8,820 9,340 9,920 11,020 11,860 12,790 14,000 15,270 16,670 18,570 20,490 21,140 21,890 24,180 24,180 29,010 29,010 30,130 4,700 4,700 4,380 4,380 4,460 4,460 4,660 4,700 4,850 5,150 5,480 6,550 6,970 7,570 8,820 9,710 10,590 11,220 11,910 13,220 14,220 15,350 16,800 18,330 19,990 22,260 24,610 25,380 26,270 29,030 29,030 34,790 34,790 36,140 φ36.0mm∼φ50.0mm:Subject to a separate quotation. − 37 − 超精密テーパ穴用 for Ultra-precision taper pin holes レーザーテーパピンリーマ(1/50) 商品コード:HP○.○ Laser Taper Pin-Reamers(1/50) レーザテーパピンリーマの特長 Features of Laser taper pin reamers ① 超精密テーパ精度(当社開発のレーザー測定器による) 超精密テーパ仕上り(下図参照) ② 耐久力向上 コバルトハイス鋼使用(難削材加工可能) ① Ultra-precision taper accuracy (according to in-house developed laser measuring equipment) Ultra-precision taper finish(see diagram below) ② Improved durability Cobalt high-speed steel used(Difficult to cut materials possible) − 38 − H.S.S. -Co 0.1mmとび レーザーテーパピンリーマ( /50) 寸法表 1 (φ0.3mm∼φ2.9mm形状) (φ0.3mm-φ2.9mm dia. shape) Laser Taper Pin-Reamers(1/50) Specification tables (φ3.0mm∼φ30.0mm形状) (φ3.0mm-φ30.0mm dia. shape) 単価:円/1本 unit : yen/1pce 型式・呼び寸法 φD Nominal Size HP 0.3 HP 0.5 HP 0.6 HP 0.8 HP 1.0 HP 1.2 HP 1.5 HP 1.6 HP 1.8 HP 2.0 HP 2.5 HP 3.0 HP 4.0 HP 5.0 HP 6.0 HP 7.0 HP 8.0 HP 9.0 HP 10.0 HP 11.0 HP 12.0 HP 13.0 HP 14.0 HP 15.0 HP 16.0 HP 17.0 HP 18.0 HP 19.0 HP 20.0 HP 21.0 HP 22.0 HP 23.0 HP 24.0 HP 25.0 HP 26.0 HP 27.0 HP 28.0 HP 29.0 HP 30.0 小端直径 大端直径 刃長R1 全長L シャンク径 シャンク長R2 φD位置 刃数 標準定価 Retail Price φD2 φD1 φd Flute Shank Overall a Number Diameter Diameter Shank of Small of Large Length Length Diameter Length φDpoint of Flute ストレート刃 Straight Flute スパイラル刃 Spiral Flute End End 0.24 0.44 0.50 0.70 0.90 1.10 1.40 1.50 1.70 1.90 2.40 2.90 3.90 4.90 5.90 6.90 7.90 8.90 9.90 10.80 11.80 12.80 13.80 14.80 15.80 16.80 17.80 18.80 19.80 20.70 21.70 22.70 23.70 24.70 25.70 26.70 27.70 28.70 29.70 0.50 0.70 0.98 1.26 1.54 1.82 2.24 2.34 2.66 2.86 3.36 4.16 5.42 6.56 8.00 9.24 10.80 12.00 13.40 14.30 15.60 17.00 18.00 19.20 20.40 21.50 22.60 23.80 24.80 25.90 27.10 28.30 29.50 30.70 31.90 33.00 34.00 35.10 36.10 上記以外のサイズは別途見積させて頂きます。 13 〃 20 24 32 36 42 〃 48 〃 〃 63 76 83 105 117 145 155 175 〃 190 210 〃 220 230 235 240 250 〃 260 270 280 290 300 310 315 〃 320 〃 35 〃 38 42 46 50 57 〃 68 〃 〃 85 100 110 135 152 180 190 215 〃 230 255 〃 270 280 290 300 310 〃 320 330 340 350 370 380 390 〃 400 〃 1.5 〃 2.0 〃 〃 2.5 〃 〃 3.0 〃 〃 4.0 5.0 6.0 8.0 〃 10.0 12.0 〃 〃 14.0 〃 16.0 18.0 〃 20.0 〃 22.0 〃 23.0 24.0 25.0 28.0 〃 〃 29.0 30.0 31.0 32.0 22 〃 14 〃 〃 〃 15 〃 20 〃 〃 22 24 27 30 35 〃 〃 40 〃 〃 45 〃 50 〃 55 60 〃 〃 〃 〃 〃 〃 70 〃 75 〃 80 〃 3 〃 5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 10 〃 〃 〃 〃 〃 〃 〃 〃 〃 15 〃 〃 〃 〃 〃 〃 〃 〃 〃 4 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 8 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 10 〃 〃 〃 〃 〃 〃 7,670 5,030 4,670 4,110 3,580 3,450 2,780 2,780 2,780 2,580 2,580 2,580 2,650 3,350 3,970 4,470 6,610 9,060 9,500 12,680 14,980 16,620 20,640 23,810 26,540 30,360 33,750 36,720 40,650 52,670 52,670 57,670 57,670 59,320 74,610 84,900 84,900 89,040 89,040 / / / / / / / / / / / 2,830 2,910 3,680 4,370 4,920 7,280 9,970 10,450 13,950 16,480 18,290 22,710 26,190 29,200 33,400 37,130 40,390 44,720 57,940 57,940 63,450 63,450 65,250 82,080 93,390 93,390 97,950 97,950 Separate estimates for sizes other than the above are also possible. − 39 − 刃径寸法調整式 アジャスタブルリーマ 商品コード:AR○ (13A∼R) Adjustable Reamers アジャスタブルリーマの特長 Features of Adjustable Reamers ① 刃径寸法が調整可能な為、一本のリーマでソリッドリーマの数十本分の機能を果す。 ② 替刃を利用すれば経済性を十分発揮します。 ① Because of you can get diameter adjust, one Adjustable reamers function possible as dozens of solid reamers. ② The spare blades save you a lot of economization. −アジャスタブルリーマ 寸法表− Adjustable Reamers specification tables 単価:円/1本 unit : yen/1pce 型式・サイズ Size AR 13A AR 12A AR 11A AR 10A AR 9A AR 8A AR 7A AR 6A AR 5A AR 4A AR 3A AR 2A AR A AR B AR C AR D AR E AR F AR G AR H AR I AR J AR K AR L AR M AR N AR O AR P AR Q AR R 調整範囲 Range of Adjustment シャンク部 (mm) 全長(mm)L Overall Length 刃長R Blade Length 角幅 Size of Square 径 Shank Dia. 刃 数 Nos.of Blades 4.50∼4.76 4.76∼5.16 5.16∼5.56 5.56∼5.95 5.95∼6.35 6.35∼7.15 7.15∼7.95 7.95∼8.70 8.70∼9.50 9.50∼10.25 10.25∼11 11∼12 12∼13.50 13.50∼15 15∼16.75 16.75∼18.25 18.25∼19.75 19.75∼21.50 21.50∼23.75 23.75∼27 27∼30.25 30.25∼34.25 34.25∼38 38∼46 46∼56 56∼70 70∼85 85∼100 100∼115 115∼130 62 65 68 72 77 83 91 107 112 121 127 134 141 146 166 172 178 188 204 230 254 280 305 356 407 457 509 560 560 560 25 〃 〃 27 30 35 〃 38 〃 〃 〃 42 〃 45 53 56 64 67 76 83 86 98 109 113 128 124 135 〃 〃 〃 1.6 1.8 2.0 2.2 2.5 2.8 3.2 4.0 〃 〃 4.5 5.5 〃 6.5 7.0 8.0 9.0 10 12 13 15 〃 17 21 26 32 38 〃 46 58 2.0 2.3 2.5 2.8 3.1 3.6 4.0 5.0 〃 5.4 6.0 6.9 7.3 8.2 9.0 10.5 11.8 13.3 14.8 16.4 19 〃 22 27 34 42 51 65 75 85 3 4 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 8 〃 〃 − 40 − SKS ケース入重量(g) Weight 標準定価 in Case Retail Price 5,420 5,420 5,420 5,110 5,110 4,870 4,870 4,870 4,870 4,990 4,990 5,110 5,110 5,210 5,420 6,070 6,520 6,940 7,600 8,660 9,760 11,940 14,100 20,600 33,600 47,710 73,730 177,820 251,540 325,300 5 6 6 7 10 13 17 26 30 37 45 59 71 90 129 172 227 292 393 525 785 945 1360 2115 3600 6140 9875 16400 19000 26000 アジャスタブルリーマ 替刃 商品コード:AB○ (13A∼R) Adjustable Reamers Blades −アジャスタブルリーマ 替刃寸法表− Adjustable Reamers Blades specification tables 単価:円/1本 unit : yen/1pce サ イ ズ Size AB 13A AB 12A AB 11A AB 10A AB 9A AB 8A AB 7A AB 6A AB 5A AB 4A AB 3A AB 2A AB A AB B AB C AB D AB E AB F AB G AB H AB I AB J AB K AB L AB M AB N AB O AB P AB Q AB R 調整範囲 Range of Adjustment (mm) 4.50∼4.76 4.76∼5.16 5.16∼5.56 5.56∼5.95 5.95∼6.35 6.35∼7.15 7.15∼7.95 7.95∼8.70 8.70∼9.50 9.50∼10.25 10.25∼11 11∼12 12∼13.50 13.50∼15 15∼16.75 16.75∼18.25 18.25∼19.75 19.75∼21.50 21.50∼23.75 23.75∼27 27∼30.25 30.25∼34.25 34.25∼38 38∼46 46∼56 56∼70 70∼85 85∼100 100∼115 115∼130 刃 数 Nos.of Blades S K S 標準定価 Retail Price 3 4 〃 〃 〃 〃 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 8 〃 〃 3,790 3,790 3,790 3,580 3,580 3,410 3,410 3,410 3,410 3,490 3,490 3,580 3,580 3,650 3,790 4250 4,560 4,860 5,320 6,060 6,830 8,360 9,880 14,420 23,520 33,400 51,610 124,480 176,080 227,710 F.P.アジャスタブルリーマ及びアジャスタブルパイロットリーマ使用上の注意 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ 切削開始時及び特に切削後、必ず右廻しで使用して下さい。 ナットは適当に強く締付けて使用して下さい。基本的な締付比は先端側ナット1:シャンク側9 刃の移動及び替刃を交換する時は、溝に異物のないように、キレイにして下さい。 鋳造材料以外の材料には切削油を用いると結果がよくなります。 リーマ代は少ない程よいが、通常はφ0.05∼φ0.15mmが適当です。 刃が一枚でも欠けた場合は、新旧刃が不均衡になりますから全部新刃と取替えて下さい。 機械掛として用いる場合は、回転をごく落し十分に切削油を用い、穴径の拡大代はできる限り少なめにして下さい。 ナットは双方共通に使用できます。 Instructions: ① ② ③ ④ ⑤ ⑥ ⑦ Clockwise revolution must be observed on post-cutting as well as cutting. Tighten the adjusting nuts properly. Basically the ratio tightening of Nut is 1(Forehead side):9(Shank side) When moving the blades to desired position for replacing with spare blades, clean carefully the blade slots bottom to obtain its accuracy. In order to ensure good results, use cutting-oil for the workpieces except cast iron. The less finishing allowance is, the better finish but normal removal amount is from 0.05mm to 0.15mm. When only one sheet of blade was damaged, replace all the blades with new ones or the reamer will lose the balance due to the damaged blade. In a temporary use by machine, decrease speed and use cutting-oil in plenty to prevent from expansion of finish hole. But do not use cutting-oil for the cast iron. ⑧ The nut can uses as a Forehead side as Shank side. − 41 − アジャスタブルリーマ部品 Adjustable Reamers Parts リーマナット パイロットガイド 商品コード:AN○(13A∼R) Reamer Nut 商品コード:AG○(6A∼N) Pilot Guide 単価:円/1本 unit : yen/1pce 単価:円/1本 unit : yen/1pce 型式 Nut No. 標準的定価 Retail Price 型式 Nut No. 標準定価 Retail Price 型式 Guide No. 標準定価 Retail Price AN 13A AN 12A AN 11A AN 10A AN 9A AN 8A AN 7A AN 6A AN 5A AN 4A AN 3A AN 2A AN A AN B AN C 310 310 310 300 300 300 300 300 300 300 300 300 300 300 310 AN D AN E AN F AN G AN H AN I AN J AN K AN L AN M AN N AN O AN P AN Q AN R 360 400 420 460 520 590 720 850 1,220 2,020 2,860 4,420 10,670 15,080 19,510 AG 6A AG 5A AG 4A AG 3A AG 2A AG A AG B AG C AG D AG E AG F AG G AG H AG I AG J AG K AG L AG M AG N 1,960 1,960 1,990 1,990 2,030 2,030 2,090 2,170 2,420 2,590 2,770 3,040 3,480 3,900 4,760 5,630 6,520 8,660 11,940 脱着式パイロットガイド・バー 商品コード:AD○(6A∼N) Detachable Pilot Guide 脱着式パイロットリーマ組立図 バー Bar L 単価:円/1本 unit : yen/1pce 型式 DPG No. 全 長 L Overall Length 標準定価 Retail Price AD A AD B AD C AD D AD E AD F AD G AD H AD I AD J AD K AD L AD M AD N 101 〃 〃 〃 127 〃 〃 〃 〃 152 〃 165 180 〃 3,350 3,590 3,680 3,900 4,120 4,240 4,560 4,760 4,990 5,320 5,630 6,520 8,660 11,940 ナット Nut スリーブ sleeve − 42 − ブレード Blades ウォッシャー washer アジャスタブルリーマ Adjustable Reamers H.S.S. ストレートシャンク・チャッキングリーマ 商品コード:HC○.○ 0.1mmとび Chucking Reamers with Straight Shanks 受注生産品 Straight flutes, Straight Shank Spiral flutes, Straight Shank 注:φ1.0∼φ4.1までのサイズは 突出しセンタ形状です。 −ストレートシャンク・チャッキングリーマ 寸法表− Chucking Reamers with Straight Shank specification tables 単価:円/1本 unit : yen/1pce 型式・ 刃径φD 公 差 Diameter Tolerance (呼び寸法) HC 1.0 HC 1.5 HC 2.0 HC 2.5 HC 3.0 HC 4.0 HC 5.0 HC 6.0 HC 7.0 HC 8.0 HC 9.0 HC 10.0 HC 11.0 HC 12.0 HC 13.0 HC 14.0 HC 15.0 HC 16.0 HC 17.0 HC 18.0 HC 19.0 HC 20.0 HC 22.0 HC 23.0 HC 24.0 HC 25.0 HC 26.0 HC 28.0 HC 30.0 HC 32.0 HC 34.0 HC 35.0 HC 36.0 HC 38.0 HC 40.0 +0.007 +0.002 〃 〃 〃 〃 +0.009 +0.004 〃 〃 +0.012 +0.006 〃 〃 〃 +0.015 +0.007 〃 〃 〃 〃 〃 〃 〃 +0.017 +0.008 〃 〃 〃 〃 〃 〃 〃 〃 +0.020 +0.009 〃 〃 〃 〃 〃 刃長R Flute Length 全長L Overall Length 20 〃 25 〃 30 〃 〃 〃 35 40 〃 〃 45 〃 〃 50 〃 〃 55 〃 〃 60 65 〃 〃 〃 70 〃 75 〃 80 〃 〃 85 90 80 〃 100 〃 110 〃 120 130 140 150 160 〃 170 〃 180 190 200 〃 〃 220 〃 230 240 250 260 〃 270 〃 280 290 310 〃 〃 320 330 喰付長さB シャンク径 刃 数 φd Chamfer Number Shank Length Diameter of Flute ∼0.5 〃 〃 〃 〃 〃 1 〃 〃 〃 〃 〃 〃 〃 〃 〃 1.5 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 2 〃 〃 〃 〃 1 1.5 1.9 2 2.5 3.5 4 5 6 〃 7 8 〃 9 10 〃 11 12 〃 14 〃 〃 16 〃 18 〃 〃 20 〃 〃 24 〃 〃 26 〃 0.1mmとびも、標準規格です。価格は上記価格の10%upです。 0.01mmとびも、標準規格です。 (公差は +0.005 です。)価格は上記価格の20%upです。 0 4 〃 〃 〃 6 〃 〃 〃 〃 〃 〃 〃 〃 〃 8 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 〃 10 〃 〃 〃 〃 〃 〃 〃 12 ストレート刃標準定価 Straight Flute Retail Price スパイラル刃標準定価 Spiral Flute Retail Price 1 本 1pce 2 本 2pce 3本以上 3pce&Over 1本 1pce 2 本 2pce 3本以上 3pce&Over 10,240 9,190 8,450 7,540 6,790 6,470 5,600 5,840 6,290 6,290 6,600 6,790 7,200 7,200 8,330 8,330 9,520 9,850 11,570 11,570 13,670 13,670 14,700 15,640 18,770 19,680 9,380 8,420 7,750 6,900 6,230 5,930 5,140 5,360 5,770 5,770 6,050 6,230 6,600 6,600 7,630 7,630 8,720 9,020 10,600 10,600 12,530 12,530 13,480 8,530 7,660 7,040 6,280 5,660 5,390 4,670 4,870 5,240 5,240 5,500 5,660 6,000 6,000 6,940 6,940 7,930 8,210 9,640 9,640 11,390 11,390 12,250 7,480 7,120 6,170 6,430 6,920 6,920 7,260 7,480 7,920 7,920 9,160 9,160 10,460 10,820 12,720 12,720 15,040 15,040 16,180 6,850 6,520 5,650 5,900 6,350 6,350 6,650 6,850 7,260 7,260 8,400 8,400 9,600 9,920 11,650 11,650 13,780 13,780 14,820 6,230 5,930 5,140 5,360 5,770 5,770 6,050 6,230 6,600 6,600 7,630 7,630 8,720 9,020 10,600 10,600 12,530 12,530 13,480 Reamers in 0.1mm increments are also available. Reamers in 0.01mm increments are also available. − 43 − 材質はSKH51 material:SKH51 H.S.S. ロングハンドリーマ 商品コード:HL○.○ 0.1mmとび Long Hand Reamers 受注生産品 Straight flutes, shank square Spiral flutes, shank square φ4.1mm以下は突出しセンタです。 φ3.0mm以下の、シャンク径は全てφ3.0mm。 For Under φ4.1mm the center parts are become sharp. For Under φ3.0mm, all the shank diameter is φ3.0mm −ロングハンドリーマ 寸法表− Long Hand Reamers specification tables 単価:円/1本 unit : yen/1pce 型式・ 刃長R 全長L 喰付長さT 刃 数 公 差 刃径φD Flute Overall Chamfer Number Diameter Tolerance Length Length Length of Flute (呼び寸法) ストレート刃標準定価 Straight Flute Retail Price スパイラル刃標準定価 Spiral Flute Retail Price 1本 1pce 2∼5本 2∼5pce 6本以上 6pce&Over 1本 1pce 2∼5本 2∼5pce 6本以上 6pce&Over HL 1.0 +0.007 +0.002 40 80 4 4 13,270 12,170 11,060 14,600 13,380 12,170 HL 1.2 〃 〃 〃 〃 〃 14,600 13,380 12,170 16,060 14,720 13,380 HL 1.5 〃 50 100 5 〃 11,520 10,560 9,600 12,670 11,620 10,560 HL 2.0 〃 60 〃 6 〃 9,120 8,350 7,600 10,020 9,190 8,350 HL 2.5 〃 〃 〃 7 〃 8,230 7,550 6,860 9,060 8,300 7,550 〃 〃 〃 8 6 6,960 6,370 5,800 7,640 7,010 6,370 HL 3.0 HL 4.0 HL 3.0 HL 4.0 HL 4.5 +0.009 +0.004 +0.007 +0.002 +0.009 +0.004 〃 〃 〃 〃 6,340 5,810 5,280 6,970 6,380 5,810 80 120 〃 〃 10,060 9,220 8,380 11,060 10,140 9,220 〃 〃 〃 〃 8,780 8,050 7,320 9,660 8,860 8,050 〃 〃 〃 9 〃 8,780 8,050 7,320 9,660 8,860 8,050 100 140 8 〃 11,300 10,370 9,420 12,440 11,400 10,370 〃 〃 〃 〃 11,300 10,370 9,420 12,440 11,400 10,370 HL 4.0 +0.007 +0.002 +0.009 +0.004 HL 5.0 〃 〃 〃 9 〃 10,600 9,720 8,830 11,660 10,690 9,720 HL 6.0 〃 〃 150 10 〃 10,020 9,190 8,350 11,030 10,120 9,190 HL 5.0 〃 120 160 9 〃 11,390 10,440 9,490 12,530 11,480 10,440 〃 〃 〃 10 〃 10,510 9,640 8,760 11,570 10,600 9,640 HL 3.0 HL 6.0 〃 〃 11 〃 11,300 10,370 9,420 12,440 11,400 10,370 150 200 10 〃 14,410 13,210 12,010 15,850 14,530 13,210 HL 7.0 +0.012 +0.006 +0.009 +0.004 +0.012 +0.006 〃 〃 11 〃 14,280 13,090 11,900 15,710 14,400 13,090 HL 8.0 〃 〃 〃 12 〃 12,760 11,700 10,630 14,040 12,880 11,700 HL 9.0 〃 〃 〃 13 〃 14,620 13,400 12,180 16,080 14,750 13,400 HL 10.0 〃 〃 〃 14 〃 16,320 14,950 13,600 17,940 16,450 14,950 HL 11.0 +0.015 +0.007 〃 〃 15 〃 17,940 16,450 14,950 19,740 18,100 16,450 HL 12.0 〃 〃 〃 〃 〃 18,430 16,900 15,360 20,280 18,590 16,900 HL 7.0 HL 6.0 − 44 − ロングハンドリーマ Long Hand Reamers −ロングハンドリーマ 寸法表− Long Hand Reamers specification tables 単価:円/1本 unit : yen/1pce 型式・ 刃長R 全長L 喰付長さT 刃 数 公 差 刃径φD Flute Overall Chamfer Number Diameter Tolerance Length Length Length of Flute (呼び寸法) ストレート刃標準定価 Straight Flute Retail Price スパイラル刃標準定価 Spiral Flute Retail Price 1本 1pce 2∼5本 2∼5pce 6本以上 6pce&Over 1本 1pce 2∼5本 2∼5pce 6本以上 6pce&Over HL 13.0 +0.015 +0.007 150 200 16 8 19,510 17,890 16,260 21,470 19,680 17,890 HL 14.0 〃 〃 〃 17 〃 21,410 19,630 17,840 23,560 21,600 19,630 HL 15.0 〃 〃 〃 18 〃 23,320 21,370 19,430 25,640 23,510 21,370 HL 16.0 〃 〃 〃 19 〃 24,500 22,460 20,420 26,950 24,710 22,460 HL 8.0 +0.012 +0.006 200 250 12 6 16,360 15,000 13,630 18,000 16,500 15,000 HL 9.0 〃 〃 〃 13 〃 17,470 16,010 14,560 19,210 17,600 16,010 HL 10.0 〃 〃 〃 14 〃 19,450 17,830 16,210 21,400 19,620 17,830 HL 11.0 +0.015 +0.007 〃 〃 15 〃 20,570 18,850 17,140 22,620 20,740 18,850 HL 12.0 〃 〃 〃 〃 〃 21,620 19,820 18,020 23,780 21,800 19,820 HL 13.0 〃 〃 〃 16 8 23,760 21,780 19,800 26,140 23,960 21,780 HL 14.0 〃 〃 〃 17 〃 24,840 22,780 20,700 27,340 25,060 22,780 HL 15.0 〃 〃 〃 18 〃 27,650 25,340 23,040 30,410 27,880 25,340 HL 16.0 〃 〃 〃 19 〃 28,490 26,110 23,740 31,330 28,730 26,110 HL 17.0 〃 〃 〃 20 〃 29,390 26,940 24,490 32,330 29,640 26,940 HL 18.0 〃 〃 〃 21 〃 30,250 27,730 25,210 33,280 30,500 27,730 HL 19.0 +0.017 +0.008 〃 〃 〃 〃 31,090 28,500 25,910 34,200 31,360 28,500 HL 20.0 〃 〃 〃 22 〃 34,570 31,690 28,810 38,030 34,860 31,690 HL 15.0 +0.015 +0.007 250 300 18 〃 39,600 36,300 33,000 43,560 39,940 36,300 HL 16.0 〃 〃 〃 19 〃 41,540 38,090 34,620 45,710 41,890 38,090 HL 17.0 〃 〃 〃 20 〃 43,920 40,260 36,600 48,310 44,290 40,260 HL 18.0 〃 〃 〃 21 〃 45,140 41,390 37,620 49,670 45,530 41,390 HL 19.0 +0.017 +0.008 〃 〃 〃 〃 47,650 43,680 39,710 52,420 48,050 43,680 HL 20.0 〃 〃 〃 22 〃 48,880 44,800 40,703 53,760 49,270 44,800 0.1mmとびも、標準規格です。価格は上記価格の10%upです。 0.01mmとびも、標準規格です。価格は上記価格の20%upです。 φ1.0mm以下も製作させて頂きます。 Reamers in 0.1mm increments are also available. Reamers in 0.01mm increments are also available. Less than 1.0mm also available. − 45 − 材質はSKH51 material:SKH51 H.S.S. マシンリーマ 商品コード:HM○.○ 0.1mmとび Machine Reamers 受注生産品 Straight flutes, Morse taper shank Spiral flutes, Morse taper shank −マシンリーマ 寸法表− Machine Reamers specification tables 単価:円/1本 unit : yen/1pce 型式・ 刃長R1 全長L 喰付長さB シャンク長さ 刃径φD 公 差 Flute Overall Chamfer Shank R2 Diameter Tolerance Length Length Length Length (呼び寸法) シャンク 刃 数 ストレート刃標準定価 Straight Flute Retail Price MTNo. Number Shank 1 本 2 本 3本以上 MTNo. of Flute 1pce 2pce 3pce&Over スパイラル刃標準定価 Spiral Flute Retail Price 1本 1pce 2 本 2pce 3本以上 3pce&Over +0.007 +0.002 +0.009 +0.004 30 110 0.5 65.5 1 6 10,160 9,320 8,470 11,180 10,260 9,320 〃 〃 〃 〃 〃 〃 11,180 10,250 9,320 12,300 11,290 10,250 HM 4.0 〃 〃 〃 〃 〃 〃 〃 9,080 8,330 7,570 10,000 9,160 8,330 HM 4.5 〃 40 120 〃 〃 〃 〃 9,990 9,160 8,330 11,000 10,080 9,160 HM 5.0 〃 〃 〃 1 〃 〃 〃 8,200 7,510 6,830 9,010 8,270 7,510 HM 5.5 〃 〃 〃 〃 〃 〃 〃 9,020 8,260 7,510 9,910 9,100 8,260 HM 6.0 〃 50 130 〃 〃 〃 〃 8,200 7,510 6,830 9,010 8,270 7,510 HM 6.5 +0.012 +0.006 〃 〃 〃 〃 〃 〃 9,020 8,260 7,510 9,910 9,100 8,260 HM 7.0 〃 55 140 〃 〃 〃 〃 8,570 7,860 7,140 9,430 8,650 7,860 HM 7.5 〃 〃 〃 〃 〃 〃 〃 9,430 8,650 7,850 10,370 9,520 8,650 HM 8.0 〃 60 150 〃 〃 〃 〃 8,570 7,860 7,140 9,430 8,650 7,860 HM 8.5 〃 〃 〃 〃 〃 〃 〃 9,530 8,730 7,940 10,480 9,610 8,730 HM 9.0 〃 70 160 〃 〃 〃 〃 8,660 7,940 7,220 9,530 8,740 7,940 HM 9.5 〃 〃 〃 〃 〃 〃 〃 9,530 8,730 7,940 10,480 9,610 8,730 HM 10.0 〃 〃 〃 〃 〃 〃 〃 8,660 7,940 7,220 9,530 8,740 7,940 HM 10.5 +0.015 +0.007 〃 〃 〃 〃 〃 〃 9,690 8,890 8,070 10,670 9,770 8,890 HM 11.0 〃 75 170 〃 〃 〃 〃 8,810 8,080 7,340 9,700 8,880 8,080 HM 11.5 〃 〃 〃 〃 〃 〃 〃 9,690 8,890 8,070 10,670 9,770 8,890 HM 12.0 〃 〃 〃 〃 〃 〃 〃 8,810 8,080 7,340 9,700 8,880 8,080 HM 12.5 〃 80 180 〃 〃 〃 〃 10,380 9,530 8,660 11,430 10,480 9,530 HM 13.0 〃 〃 〃 〃 〃 〃 8 9,440 8,660 7,870 10,390 9,530 8,660 HM 13.5 〃 85 190 〃 〃 〃 〃 10,380 9,530 8,660 11,430 10,480 9,530 HM 14.0 〃 〃 〃 〃 〃 〃 〃 9,440 8,660 7,870 10,390 9,530 8,660 HM 14.5 〃 90 210 1.5 80 2 〃 11,630 10,650 9,690 12,780 11,730 10,650 HM 3.0 HM 3.5 − 46 − マシンリーマ Machine Reamers −マシンリーマ 寸法表− Machine Reamers specification tables 単価:円/1本 unit : yen/1pce 型式・ 刃長R1 全長L 喰付長さB シャンク長さ 刃径φD 公 差 Flute Overall Chamfer Shank R2 Diameter Tolerance Length Length Length Length (呼び寸法) シャンク 刃 数 ストレート刃標準定価 Straight Flute Retail Price MTNo. Number Shank 1 本 2 本 3本以上 MTNo. of Flute 1pce 2pce 3pce&Over スパイラル刃標準定価 Spiral Flute Retail Price 1本 1pce 2 本 2pce 3本以上 3pce&Over HM 15.0 +0.015 +0.007 90 210 1.5 80 2 8 10,570 9,680 8,810 11,620 10,660 9,680 HM 16.0 〃 95 215 〃 〃 〃 〃 10,930 10,020 9,110 12,020 11,030 10,020 HM 17.0 〃 100 220 〃 〃 〃 〃 12,170 11,160 10,140 13,390 12,280 11,160 HM 18.0 〃 105 225 〃 〃 〃 〃 12,170 11,160 10,140 13,390 12,280 11,160 HM 19.0 +0.017 +0.008 〃 〃 〃 〃 〃 〃 14,620 13,400 12,180 16,080 14,750 13,400 HM 20.0 〃 110 230 〃 〃 〃 〃 14,620 13,400 12,180 16,080 14,750 13,400 HM 21.0 〃 120 240 〃 〃 〃 〃 15,700 14,390 13,080 17,270 15,830 14,390 HM 22.0 〃 〃 〃 〃 〃 〃 〃 15,700 14,390 13,080 17,270 15,830 14,390 HM 23.0 〃 130 250 〃 〃 〃 〃 17,090 15,670 14,240 18,800 17,240 15,670 HM 24.0 〃 〃 270 〃 99 3 〃 19,730 18,080 16,440 21,700 19,900 18,080 HM 25.0 〃 〃 〃 〃 〃 〃 〃 20,980 19,240 17,480 23,090 21,160 19,240 HM 26.0 〃 140 280 〃 〃 〃 10 23,590 21,620 19,660 25,940 23,780 21,620 HM 28.0 〃 〃 〃 〃 〃 〃 〃 26,880 24,650 22,400 29,580 27,110 24,650 HM 30.0 〃 150 290 〃 〃 〃 〃 30,610 28,070 25,510 33,680 30,880 28,070 HM 32.0 +0.020 +0.009 160 300 〃 〃 〃 〃 36,140 33,130 30,120 39,760 36,440 33,130 HM 34.0 〃 〃 325 2 124 4 〃 44,500 40,790 37,080 48,950 44,870 40,790 HM 36.0 〃 165 330 〃 〃 〃 〃 47,520 43,560 39,600 52,270 47,920 43,560 HM 38.0 〃 〃 〃 〃 〃 〃 〃 54,720 50,160 45,600 60,190 55,180 50,160 HM 40.0 〃 〃 〃 〃 〃 〃 12 63,360 58,080 52,800 69,700 63,890 58,080 HM 42.0 〃 170 335 〃 〃 〃 〃 70,560 64,680 58,800 HM 44.0 〃 〃 〃 〃 〃 〃 〃 78,480 71,940 65,400 HM 46.0 〃 175 340 〃 〃 〃 〃 85,820 78,670 71,520 HM 48.0 〃 180 350 〃 〃 〃 〃 90,720 83,160 75,600 HM 50.0 〃 〃 385 〃 156 5 〃 97,920 89,760 81,600 HM 52.0 +0.024 +0.011 〃 〃 〃 〃 〃 〃 0.1mmとびも、標準規格です。価格は上記価格の10%upです。 0.01mmとびも、標準規格です。価格は上記価格の20%upです。 Reamers in 0.1mm increments are also available. Reamers in 0.01mm increments are also available. − 47 − 材質はSKH51 material:SKH51 特 殊 品(お見積りに関して) Special orders ●図面物別作品ご注文に対するメーカーからの要望事項について ・Please specify the following particulars when need order-made products. 全長、刃長、刃数、外径(刃部及びシャンク)、刃径公差、刃形状について 1 形 2 切 削 条 件 被削材、回転数、送り、油を使用されているか否か、加工穴の状態について 3 ご使用機械 どのような機械を使用されますか。 4 状 ご連絡方法 Shape:overall length, flute length, no. of flutes, cutting and shank diameters with tolerances, flute shape Cutting Conditions:workpiece, rpm, feed, cutting oil, state of drilled hole Machine to be used:let us know what machine you will be using. 上記内容を出来ましたら、E-mail又はFAXにてご送付お願い申しあげます。 Connection:Sending the above particulars by E-mail or FAX will enable a prompt reply. ※FAX. 075 (501) 0476 ※E-mail [email protected] リーマ各部の名称 Names of Reamers Parts Technical Information − 48 − 穴 寸 法 公 差 表 Table of standard tolerance grades for holes 基準寸法 (mm) を超え 以下 − 3 3 6 6 10 10 18 18 30 30 50 D 以下 − 3 3 6 6 10 10 18 18 30 30 50 8 9 7 8 9 6 7 8 +0.045 +0.020 +0.060 +0.030 +0.076 +0.040 +0.093 +0.050 +0.117 +0.065 +0.142 +0.080 +0.024 +0.014 +0.032 +0.020 +0.040 +0.025 +0.050 +0.032 +0.061 +0.040 +0.075 +0.050 +0.028 +0.014 +0.038 +0.020 +0.047 +0.025 +0.059 +0.032 +0.073 +0.040 +0.089 +0.050 +0.039 +0.014 +0.050 +0.020 +0.061 +0.025 +0.075 +0.032 +0.092 +0.040 +0.112 +0.050 +0.012 +0.006 +0.018 +0.010 +0.022 +0.013 +0.027 +0.016 +0.033 +0.020 +0.041 +0.025 +0.016 +0.006 +0.022 +0.010 +0.028 +0.013 +0.034 +0.016 +0.041 +0.020 +0.050 +0.025 +0.020 +0.006 +0.028 +0.010 +0.035 +0.013 +0.043 +0.016 +0.053 +0.020 +0.064 +0.025 G 6 7 5 6 7 8 9 10 +0.012 +0.002 +0.016 +0.004 +0.020 +0.005 +0.024 +0.006 +0.028 +0.007 +0.034 +0.009 +0.004 0 +0.005 0 +0.006 0 +0.008 0 +0.009 0 +0.011 0 +0.006 0 +0.008 0 +0.009 0 +0.011 0 +0.013 0 +0.016 0 +0.010 0 +0.012 0 +0.015 0 +0.018 0 +0.021 0 +0.025 0 +0.014 0 +0.018 0 +0.022 0 +0.027 0 +0.033 0 +0.039 0 +0.025 0 +0.030 0 +0.036 0 +0.043 0 +0.052 0 +0.062 0 +0.040 0 +0.048 0 +0.058 0 +0.070 0 +0.084 0 +0.100 0 − 3 3 6 6 10 10 18 18 30 30 50 K M P 5 6 7 5 6 7 6 7 0.004 −0.004 0.004 −0.005 +0.001 −0.005 +0.002 −0.006 +0.001 −0.008 +0.002 −0.009 0.004 −0.006 +0.002 −0.006 +0.002 −0.007 +0.002 −0.009 +0.002 −0.011 +0.003 −0.013 0.004 −0.010 +0.003 −0.009 +0.005 −0.010 +0.006 −0.012 +0.006 −0.015 +0.007 −0.018 −0.002 −0.006 −0.003 −0.008 −0.004 −0.010 −0.004 −0.012 −0.005 −0.014 −0.005 −0.016 −0.002 −0.008 −0.001 −0.009 −0.003 −0.012 −0.004 −0.015 −0.004 −0.017 −0.004 −0.020 −0.002 −0.012 0.004 −0.012 0.004 −0.015 0.004 −0.018 0.004 −0.021 0.004 −0.025 −0.006 −0.012 −0.009 −0.017 −0.012 −0.021 −0.015 −0.026 −0.018 −0.031 −0.021 −0.037 −0.006 −0.016 −0.008 −0.020 −0.009 −0.024 −0.011 −0.029 −0.014 −0.035 −0.017 −0.042 − 49 − Technical Information 以下 H +0.008 +0.002 +0.012 +0.004 +0.014 +0.005 +0.017 +0.006 +0.020 +0.007 +0.025 +0.009 基準寸法 (mm) を超え F +0.034 +0.020 +0.048 +0.030 +0.062 +0.040 +0.077 +0.050 +0.098 +0.065 +0.119 +0.080 基準寸法 (mm) を超え E インチ (in) の分数からミリメートル(mm)への換算表 Inch-to mm conversion table 換算率:1in=25.4mm in in 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 Technical Information 29/64 15/32 31/64 1/2 mm in in 33/64 0.015625 0.3969 0.03125 0.7938 0.046875 1.1906 0.0625 1.5875 0.078125 1.9844 0.09375 2.3812 0.109375 2.7781 0.125 3.175 0.140625 3.5719 0.15625 3.9688 0.171875 4.3656 0.1875 4.7625 0.203125 5.1594 0.21875 5.5562 0.234375 5.9531 0.25 6.35 0.265625 6.7469 0.28125 7.1438 0.296875 7.5406 0.3125 7.9375 0.328125 8.3344 0.34375 8.7312 0.359375 9.1281 0.375 9.525 0.390625 9.9219 0.40625 10.3188 0.421875 10.7156 0.4375 11.1125 0.453125 11.5094 0.46875 11.9062 0.484375 12.3031 0.5 12.7 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 mm 0.515625 13.0969 0.53125 13.4938 0.546875 13.8906 0.5625 14.2875 0.578125 14.6844 0.59375 15.0812 0.609375 15.4781 0.625 15.875 0.640625 16.2719 0.65625 16.6688 0.671875 17.0656 0.6875 17.4625 0.703125 17.8594 0.71875 18.2562 0.734375 18.6531 0.75 19.05 0.765625 19.4469 0.78125 19.8438 0.796875 20.2406 0.8125 20.6375 0.828125 21.0344 0.84375 21.4312 0.859375 21.8281 0.875 22.225 0.890625 22.6219 0.90625 23.0188 0.921875 23.4156 0.9375 23.8125 0.953125 24.2094 0.96875 24.6062 0.984375 25.0031 1 25.4 in 1 2 3 4 5 6 7 8 9 mm 25.4 50.8 76.2 101.6 127.0 152.4 177.8 203.2 228.6 − 50 − 硬 さ 換 算 表 (ブリネル・くぼみ径及びロックウェルCスケールに対する近似的換算値) Hardness conversion tables (approximate conversion values for Brinnel hardness, indentation width and Rockwell C scale) ブリネル(HB) (10mm 3,000kgf) く ぼ み 径 硬 さ ビ ッ カ ー ス ロックウェル ブリネル(HB) (10mm 3,000kgf) Bスケール 1.5875mm 鋼 球 − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − (110.0) − (109.0) (109.0) (108.5) (108.5) (108.0) (108.0) (107.5) (107.5) (107.0) (107.0) (106.0) HRC ョ Cスケール 引 く ぼ み 径 張 強 ダイヤモンド ア さ 150kgf (Hs) (kgf/mm2) 68.0 67.0 66.0 65.0 64.0 63.0 62.0 61.0 60.0 59.0 58.0 57.0 56.0 55.0 54.0 53.0 52.0 51.6 51.0 50.3 50.0 49.0 48.8 48.0 47.2 47.0 46.0 45.7 45.0 44.5 44.0 43.1 43.0 42.0 41.8 41.0 40.4 40.0 39.1 39.0 38.0 37.9 37.0 36.6 36.0 35.5 35.0 34.3 34.0 33.1 33.0 32.1 32.0 31.0 97 95 92 91 88 87 85 83 81 80 78 76 75 74 72 71 69 − 68 − 67 66 − 64 − 63 62 61 60 59 58 57 57 56 56 55 54 54 52 52 51 51 50 50 49 48 48 47 47 46 46 45 44 43 硬 さ ビ ッ カ ー ス ロックウェル 3.55 − 3.60 − 3.65 − 3.70 − 3.75 − 3.80 − 3.85 − − 3.90 − 3.95 − 4.00 − 4.05 4.10 4.15 4.20 4.25 4.30 4.35 4.40 4.45 4.50 4.55 4.60 4.65 4.70 4.75 4.80 4.85 4.90 4.95 5.00 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.40 5.45 5.50 5.55 5.60 − 51 − 293 − 285 − 277 − 269 − 262 − 255 − 248 − − 241 − 235 − 229 − 223 217 212 207 201 197 192 187 183 179 174 170 167 163 159 156 152 149 146 143 140 137 134 131 128 126 123 121 118 116 114 111 309 302 301 294 292 286 284 279 276 272 269 266 261 260 254 253 248 247 243 241 238 234 228 222 218 212 207 202 196 192 188 182 178 175 171 166 163 160 156 153 150 147 143 141 137 134 132 129 127 124 122 120 117 概 略 HRB Bスケール 1.5875mm 鋼 球 (mm) (鋼球) (Hv) 100kgf − − − − − − − − − − − − − 212 205 199 192 189 186 181 179 172 172 167 162 161 156 154 151 149 146 142 141 136 136 132 129 127 124 124 120 120 118 115 114 112 110 108 108 105 105 103 102 100 シ (106.0) (105.5) (105.5) (104.5) (104.5) (104.0) (104.0) (103.0) (103.0) (102.5) (102.0) (101.5) (101.0) (101.0) 100.0 100.0 99.0 99.0 98.5 98.2 97.8 97.3 96.4 95.5 94.6 93.8 92.8 91.9 90.7 90.0 89.0 87.8 86.8 86.0 85.0 83.8 82.9 81.7 80.8 − 78.7 − 76.4 − 74.0 − 72.0 − 69.8 − 67.6 66.7 65.7 HRC ョ Cスケール 引 張 強 ダイヤモンド ア さ 150kgf (Hs) (kgf/mm2) 30.9 30.0 29.9 29.0 28.8 28.0 27.6 27.0 26.6 26.0 25.4 25.0 24.2 24.0 23.0 22.8 22.0 21.7 21.0 20.5 − 18.8 17.5 16.0 15.2 13.8 12.7 11.5 10.0 9.0 8.0 6.4 5.4 4.4 3.3 2.0 0.9 0.0 − − − − − − − − − − − − − − − 43 42 − 41 41 41 40 40 39 38 38 38 37 37 36 36 35 35 35 34 34 − 33 32 32 31 30 29 28 28 27 − 26 − 25 25 − 24 23 − 22 − 21 − − − 20 − 19 − 18 − 15 99 97 97 95 94 93 91 90 89 88 86 86 84 84 82 82 80 80 79 78 77 − 74 72 70 69 67 65 63 63 61 60 58 57 56 54 53 53 51 − 50 − 47 − 46 − 44 − 42 − 41 40 39 Technical Information 940 900 865 832 800 772 746 720 697 674 653 633 613 595 577 560 544 539 528 516 513 498 495 484 474 471 458 455 466 440 434 425 423 412 410 402 396 392 383 382 372 372 363 360 354 350 345 339 336 328 327 319 318 310 概 略 HRB (mm) (鋼球) (Hv) 100kgf − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − − (2.75) (495) − − (2.80) (477) − − − − (2.85) (461) − − 444 2.90 − − − − 429 2.95 − − 415 3.00 − − 401 3.05 − − − − 388 3.10 − − 375 3.15 − − 363 3.20 − − − − 352 3.25 − − 341 3.30 − − 331 3.35 − − 321 3.40 − − 311 3.45 − − 302 3.50 − − − − シ リーマ加工のトラブルとその対策 Reamer trouble shooting トラブル Trouble 外周の異常摩耗 Abnormal peripheral abrasion 穴の曲がり・倒れ Bent and cracked hole 穴径の異常拡大 Abnormal enlargement of hole diameter 穴径の縮小 Decreased hole diameter マージン部の溶着 Fused margin 真円度の不良 Defective roundness Technical Information 仕上げ面のあらさ不良 Defective finished surface roughness リーマの折損 Broken reamer 対 策 Remedy 原 因 Probable Cause 喰付角が小さい。 Too small chamfer angle 切削速度が速すぎる。 Cutting speed too fast 冷却が充分でない。 Insufficient cooling マージン巾が広い。 Margin width too wide 逃げ角が小さい。 Too small relief angle 被削材が硬い。 Workpiece material too hard 下穴の曲がり。 Bent drilled hole 喰付時の芯ずれ。 Out of center at Chamfering 先端形状が対称でない。 Tip shape is not symmetrical リーマ代が大きい。 Removal amount too large 切削速度が速い。 Cutting speed too fast マージン部の溶着。 Fused margin バニッシングが弱い。 Burnishing too weak リーマ代が小さい。 Removal amount too small 加工物のクランプ不良。 Incorrectness of the crump position バニッシングが強い。 Burnishing too strong 切削速度が速すぎる。 Cutting speed too fast マージン巾が広い。 Margin width too wide 逃げ角が小さい。 Too small relief angle 切刃の摩耗による発熱 Heat generated through worn flute 切削油量の不足。 Insufficient amount of cutting oil 切削油の不適当。 Incorrect cutting oil ねじれ角が不適当。 Incorrect spiral angle 喰付角が大きい。 Too large chamfer angle マージン巾がせまい。 Margin width too narrow マージン部の溶着。 Fused margin リーマ代が小さい。 Too small removal amount 加工物のクランプ不良。 Incorrectness of the crump position バニッシングが弱い。 Weak burnishing マージン部の溶着。 Fused margin 切屑がつまる。 Chip blockade 構成刃先 Built-up edge 切削油量の不足。 Insufficient amount of cutting oil 刃先形状が対称でない。 Flute tip shapes is not symmetrical リーマ代が不適当。 Incorrect removal amount 切屑がつまる。 Chip blockade 穴径の縮小 decrease hole diameter 外周の異常摩耗 Abnormal peripheral abrasion 喰付角を大きくする。 Increase the chamfer angle 切削速度を低くする。 Decrease the cutting speed 給油ノズルの位置を変え流量を増やす。又は、潤滑性の良い切削油剤に変更する。 Change position of cutting oil nozzle. Increase flow rate. Use milder lubricant リーマの設計変更。 Change reamer design 逃げ角を大きくする。 Increase the relief angle リーマの材質を選定し直す。 Select reamer material again 下穴の曲がりをなくす。 Remove bend in hole 芯ずれをなくす。 Remove center non-alignment 刃先を正しく再研磨する。 Regrind the chamter リーマ代を小さくする。 Decrease removal amount 切削速度を低くする。 Decrease the cutting speed (溶着の項参照。 ) (See item on fusing) 設計変更(マージン巾→大,喰付角,バックテーパー→小) Change design(increase margin width, decrease chamfer angle and back taper) リーマ代の変更。 Change removal amount クランプ変更。 Change the position of work 設計変更(拡大時の逆) 。 Change design(reverse to “burnishing too weak”above) 切削速度を低くする。 Decrease the cutting speed リーマの設計変更。 Change reamer design 逃げ角を大きくする。 Increase the relief angle 早期に再研磨する。リーマの材質変更。 Regrind st early stage. Change reamer material 充分な切削油が刃先に届くようにする。 Supply sufficient of cutting oil to tool tip 切削油の選定をし直す。 Select cutting oil again リーマの設計変更(左ねじれ,不等分割) Change reamer design(left hand spiral, uneven graduation) 喰付角を小さくする。 Decrease the chamfer angle マージン巾を広くする。 Widen margin width (溶着の項参照。 ) (See item on fusing) リーマ代の変更。 Change removal amount クランプ変更。 Change the position of work (穴径の異常拡大の項参照。 ) (See item on abnormal enlargement of hole diameter) (溶着の項参照。 ) (See item on fusing) リーマの設計変更。 Change reamer design 速度を下げる。潤滑性の良い油剤を使用。 Decrease the cutting speed. Use milder lubricant 充分な切削油を供給する。 Supply sufficient amount of cutting oil 刃先を正しく再研磨する。 Correctly regrind flute tip リーマの設計変更。 Change reamer design リーマの設計変更。 Change reamer design (穴径の縮小の項参照。 ) (See item on decreased hole diameter) (外周の異常磨耗の項参照。 ) (See item on abnormal peripheral abrasion) トラブルを未然に防止する為には、リーマ装着時の振れを抑える。ワークとの芯ずれをなくす。 − 52 − 1 バックテーパ(BACK TAPER) ハイスハンドリーマ及び、超硬リーマは、刃部の先端からシャンク側に向かって細くなっています。 アジャスタブルリーマは、刃部の中央を最大にして、0.02mmから0.2mm程度細くなっています。 H.S.S. hand reamers are back-tapered from the flute end to the shank, and carbide reamers . Adjustable reamers are back-taped 0.02-0.2mm from the center of blade as maximum. 2 スパイラル刃(SPIRAL FLUTES) (長所) a)ストレート刃より仕上面あらさが一般的には良好になる。 b)拡大代がストレート刃より少ない。 c)特に銅、アルミ等の非鉄金属には左ねじれ刃が有効である。 d)止まり穴には右ねじれ刃が良い。(切粉が上にあがります。) e)キー溝等の切欠のある穴には有効である。 (短所) a)再研磨がストレート刃より困難である。 b)ストレート刃より高価である。 c)ストレート刃より被削材に対して制約を受ける事が多い。 左ねじれと右ねじれのちがい ●左ねじれ すくい角が鈍角に作用しバニッシング効果が大きくなり仕上面がよくなるが、穴が縮小しが ちで高硬度の被削材の場合には、強い締め付力が働いて仕上面がむしれたり、リーマが破損 する事がある。 弊社では、アジャスタブルリーマはストレート刃のみであるが、超硬はHシリーズ(左ネ ジレ30° )、ハイスの製品は指定のねじれ角でスパイラルの製品も製作しております。 ●右ねじれ すくい角が鋭角に作用し切れ味がよく、切粉の排出も容易で高硬度の被削材に安定するが軟 おります。 Strong point a) Finish surface roughness is generally better than straight flutes b) Enlarged allowance is less than straight flutes c) Left hand spiral flutes are particularly effective on non-ferrous metals such as copper and aluminum d) Right hand spiral flutes are better for blind holes.(chips rise up) e) Effective on holes with groove such as T slot Weak points a) Regrinding is more difficult than straight flutes b) More expensive than straight flutes c) Often more restricted with respect to workpiece material than straight flutes − 53 − Technical Information かい被削材では食込みやすく「びびり」の原因になります。弊社は超硬Rシリーズを製作して Difference between left hand spiral and right hand spiral ●Left Hand Spiral Rake angle is obtuse, burnishing effect is great and finish is improved. However, holes tend to decrease in size, and in reaming high-carbide materials, a strong torque occurs and the finish surface sometimes becomes rough or the reamer breaks. With F.P. reamers, adjustable reamers are furnished with only straight flute. However, we also make the H series (left hand helical 30° ) for carbide reamers, and spiral flute reamers at user specified spiral angles for high-speed steel products. ●Right Hand Spiral Rake angle is sharp and reamer cuts well. Chip ejection is easy and cutting is stable with high carbide materials. However, reamer bites in too easily with soft materials, which cause chattering. We make the R series for carbide reamers. 3 リーマの寸法公差(REAMER TOLERANCE) リーマ通し作業では、加工穴の径を指定公差内に仕上げる為に、リーマの刃径を正しく定める事が大 切である。 それには加工穴の公差、リーマの寸法公差と加工時におこる拡大代(被削材によっては縮小もする) を考慮する必要があるが、この拡大代を正確に把握するのは、色々な加工条件が加わり非常に困難な事 であり実際には、作業実験にたよらなければならないのが現状である。 被削材の材質、硬さ、切削条件、下穴の形状及びリーマ代、使用機械の剛性、被削材の取付状態等に より仕上精度が大きく変化する。 JISで規定されるリーマは、m5の寸法公差を標準とし、穴精度がH7に仕上がる様に設定されているが、 現在では刃径寸法が0.01mmとび更には0.005mmとびのリーマが在庫される如く、m5の寸法公差で はユーザーのニーズに合わなく成りつつあり、寸法公差0∼+0.005mm(J5公差)又は、ご希望によ る任意の寸法公差で製作されるようになってきました。 弊社では、超硬μ(ミュー)リーマは刃径0.001mmとび、超硬リーマGシリーズ、F.P.ゴールドリー マは刃径0.005mmとびを標準化とし、寸法公差では、超硬μリーマは0∼+0.001mm未満、超硬Gシ リーズ、Bシリーズ、Hシリーズ、Sシリーズ(サーメット材)はジャスト寸法も製作可能です。 Technical Information In the reaming process, it is important that the reamer diameter is determined correctly so that the diameter of the drilled hole is finished to within the designated tolerance. Moreover, the drilled hole tolerance, reamer dimensional tolerance and the enlarged allowance during machining (also decrease according to the material) must be taken into consideration. However, it is extremely difficult to accurately grasp this enlarged allowance as various cutting conditions are involved. In fact, test data must be relied on. The finish accuracy varies greatly depending on the material, its hardness, cutting conditions, shape and removal amount of the drilled hole, rigidity of the machine in use, clamping state of the material, and other factors. Reamers as determined by JIS conform to a standard tolerance of m5 and must finish holes to an accuracy of H7 ; however, at present, reamers of 0.01 unit, moreover 0.005 unit have come to general stock, and at a dimensional tolerance of m5, former reamers cannot now meet user needs, for this reason, we now manufacture reamers according to our user requests for tolerance 0∼+0.005(J5)or user-specified dimensional tolerances. With F.P. reamers, such as Carbide μ reamers, in 0.001 units G series. F.P. Gold reamer, Hand reamer, in 0.005 units are standard, in addition, μ reamers tolerance must by +0.001 less/0. Carbide reamers such as G series, B series, H series and S series (cermet material), are also called just to tolerances and so on, upon request. − 54 − 4 切削油(CUTTING OILS) リーマ加工で、切削油剤に対して直接的に要求される性能 (一次性能)としては ① 切削温度を下げ、リーマの摩耗を減少させる。 ② リーマの刃先への溶着や、構成刃先の発生を抑制し、面粗度・寸法精度を安定させる。 ③ 切削抵抗を減少させる。 などがあります。 更に間接的に要求される性能 (二次性能)としては ① 人体に無害であること。 ② 加工面に化学的に作用して、腐食や変色を生じさせないこと。 ③ 発煙や火災を生じないこと。 ④ 臭気やべた付き、腐敗や変質のないこと。 ⑤ 廃液処理が容易でコストが安いこと。 などがあります。 下の表は切削油剤の種類を大きく分けて、その特性を表にしたものです。 分 類 潤滑油 耐溶着性 冷却性 防錆性 浸透性 耐発煙性 臭気 ◎ 優れている 水溶性 エマルジョンタイプ ○ △ ◎ △ ○ ◎ ○ ソリューブルタイプ △ △ ◎ △ ○ ◎ ◎ ソリューションタイプ × △ ◎ △ △ ◎ ◎ 塩素油系 ◎ ◎ ○ ○ ◎ △ ◎ 硫化塩素油系 ◎ ◎ ○ ○ ◎ △ △ 不水溶性 ○ 良好 △ やや劣る × 不良 (相対比較) リーマの加工に於いては、その加工精度に対して、構成刃先とバニッシング作用の影響が大きく、切削 及び工作機械などの要因を勘案し、今の所、一次性能、二次性能共に満足する切削油剤はないので、ど の特性を優先し、どの特性を犠牲にするかによることになります。一般に、リーマ加工に於いては、仕 上面粗さを良好にするため切削速度は低速に抑えられていますが、この様な条件の下では潤滑性に優れ る低粘度の不水溶性切削油剤(硫化・塩素油)が適しています。一方、最近の傾向として加工の高速化 や自動化・無人化指向に伴う作業環境改善、防災上の問題等から水溶性切削油剤の使用が増加する傾向 にあり、殆どの場合、エマルジョンタイプが適しているといえます。 − 55 − Technical Information 油剤の果たす役割は重要です。切削油剤の選択に当たっては、切削条件、加工方法、工具材種、被削材 Directly demanded performances (Primary Performances) on the cutting oil in the reaming process are as follows; ① To reduce cutting heat and decrease reamer abrasion ② To restrain welding and built-up edge on reamer lips and to stabilize roughness in finish and hole accuracy of workpiece ③ To reduce cutting resistance Indirectly demanded performances (Secondary Performances) on the cutting oil in the reaming process are as follows; ① ② ③ ④ ⑤ No harm to the human body No corrosion or discoloration occur to in the workpieces from chemical action No smoke or fire occur No odor, stickiness, decay or transmutation Easy disposal of waste oil and its low cost Property Table for Selection of Cutting Oil Lubricity Water-soluble Non Water-soluble Adhension Cooling Rust Smoke Permeability Resistance Capability Resistance Rerardant Odor ◎ Excellent Emulsion type ○ △ ◎ △ ○ ◎ ○ Soluble type △ △ ◎ △ ○ ◎ ◎ Solution type × △ ◎ △ △ ◎ ◎ Chlorinated Oil ◎ ◎ ○ ○ ◎ △ ◎ ○ Good △ Inferior × Poor SolfideChlorinated Oil ◎ ◎ ○ ○ ◎ △ △ (relative comparision) Technical Information In the reaming process, built-up edge and burnishing have a great effect on the machining accuracy and the roles of cutting oil are important. In selecting a cutting oil, considering such factors as cutting condition, machining method, tool material. Workpieces and machine it depends on what property will be selected in advance and what property will be sacrificed as there is no cutting oil to cover both the primary performance and the secondary ones at present. Generally, in the reaming process, the cutting speed is restrained to obtain a good roughness in finish and non water-soluble cutting oil (chlorinated oil, sulfa-chlorinated oil) with good lubricity and low viscosity are suitable under these conditions. However, as a recent trend, the usage of water soluble cutting oils is increasing in view of improvement of the working environment, prevention of disaster with high speed machining, factory automation and flexible manufacturing system. − 56 − M E M − 57 − O M E M − 58 − O M E M − 59 − O 安全にご使用いただくためのお願い 工具の破損や飛散によるけがの危険性があります。安全カバー や保護めがね等の保護具を使用して下さい。 ① 適正な切削条件で使用して下さい。 ② 急激な負荷や過度の摩耗により、工具が破損や飛散する危険があります。無理なご使用はお 止め下さい。 ③ 大きな欠けや、摩耗した工具は使用しないで下さい。また、適切な時期に工具交換をして下 さい。 ④ ホルダーへの取り付けは、がたや振れのないようしっかりと取り付けて下さい。 ⑤ 被削材は動かないようしっかりと固定して下さい。 工具や切りくずでけがをする危険性があります。安全カバーや 保護めがね、革手袋等の保護具を使用して下さい。 ① 切れ刃を素手で触れないで下さい。工具を持つ場合は、革手袋を使用するか、切れ刃以外を 持って下さい。 ② 切りくずは素手で触れないで下さい。切りくずを除去するときは、必ず機械を止めてから革 手袋等を使って処理して下さい。 ③ 切りくずが巻き付いたり飛散する危険があります。身体に触れないようにして下さい。 ④ 巻き込まれけがをする危険があります。回転中の工具や切りくずには絶対に触れないで下さい。 ⑤ 工具に巻き込まれる危険性がありますので、回転中の手袋の着用はお止め下さい。 ⑥ 加工後の工具や切りくずは、高温になっているため素手で触れないで下さい。火傷の恐れが あります。 ⑦ 被削材にバリを生じる場合があります。けがにご注意下さい。 切削中の発熱による発煙や火災に注意。自動消火装置などの防火 対策を行って下さい。 不水溶性切削油剤をお使いの場合は、過熱、火花等による火災や発煙に十分ご注意下さい。 ご使用にあたってのお願い ① 商品をご使用の際は、念のため工具のサイズをご確認の上ご使用下さい。 ② 推奨条件はあくまで目安となる数値です。ワーク形状や加工環境に合わせて適正化して下さい。 ③ ご使用の際は、あらかじめワークと同等の被削材でテストされることをお勧めします。 ④ 刃先を傷めないよう取り扱いには十分注意して下さい。 ⑤ お客様での改造などは行わないで下さい。それにより生じた事故等について、弊社は、一切の責任 を負いかねます。 − 60 − ● リーマ刃径寸法許容差 JIS規格と当社規格比較 ● JISで規格されているリーマは、m5の許容差を標準とし、穴寸法精度がH7に仕上がる様に設定 されています。しかし、高精度加工が要求される現在においては、もはやm5許容差では対応しき れないのが現状です。 † に設定、刃径を 当社では、高精度加工に対応すべく、一般許容差を0∼+0.005mm(J5) 0.005mmとびに製作。また超硬μ(ミュー)リーマにおいては、刃径許容差を0∼1μm未満、刃 径を1μmとびとすることにより、要求穴精度に対するリーマの選択肢を大幅に拡げました。 刃径寸法(mm) J I S 当 社 穴寸法許容差 リーマ許容差 を超え 以 下 H7 m5 − 3 +0.010 0 +0.006 +0.002 3 6 +0.012 0 +0.009 +0.004 6 10 +0.015 0 +0.012 +0.006 10 18 +0.018 0 +0.015 +0.007 18 30 +0.021 0 +0.017 +0.008 30 50 +0.025 0 +0.020 +0.009 リーマ許容差 (J † 5) +0.005 0 †:J5公差は弊社独自の公差表示です。 例)φ10.0 H7の穴加工のリーマ選択 穴許容差 H7 リーマ許容差 m5 当社一般リーマ許容差 (上限 5μm) 上限15μm 超硬μ(ミュー) ・リーマ φ10.014 φ10.013 (上限 12μm) φ10.010 φ10.012 φ10.011 φ10.0 m5 (下限 0μm) φ10.010 (上限 5μm) φ10.009 (下限 6μm) φ10.008 φ10.005 φ10.007 φ10.006 (下限 0μm) φ10.005 (上限 5μm) φ10.004 φ10.003 φ10.000 下限0μm φ10.002 φ10.001 (下限 0μm) φ10.000 山科近郊 醍醐寺 五重大塔 山科第一疎水 醍醐寺 五重大塔 Five-storied pagoda in Daigo Temple First channel of Yamashina 第一疎水 First channel 山科第一疎水 N 地下鉄東西線 Touzai Line 御陵 Misasagi 東海道線 Tokaido Line 山科駅 山科 Yamashina 至浜大津 JR Yamashina St. 至京都三条 bound for Kyoto Sanjo bound for Otsu 外 環 状 Sotokanjo 線 Line 東野 Higashino 京都東 インター Meishin High-Way Kyoto East Interchange 東野交差点 Gojo Bypass 至京都五条 bound for Kyoto Gojo 五条バイパス1号線 (Route No.1) 新幹線 Shinkan Sen(Bullet Train) bound for Osaka エフ・ピー・ツール株式会社F.P.TOOLS 至 宇 治 bound for uji 名 神 高 速 bound for Tokyo 至 醍 醐 bound for Daigo エフ・ピー・ツール株式会社 〒607-8153 京都市山科区東野百拍子町47番地の3 TEL. 075-581-2101 FAX. 075-501-0476 URL : http://www.fptools.com/ E-mail : [email protected] F.P.TOOLS CO.,LTD. 47-3 Hyakubyoshi-cho, Higashino Yamashina-ku, Kyoto 607-8153 JAPAN phone : +81 75 581 2101 Facsimile : +81 75 501 0476 URL : http://www.fptools.com/ E-mail : [email protected] このカタログの印刷には、環境に配慮した植物性大豆インキを使用しております。 2006.02