研究活動 - Department of Precision Engineering

1． 研究活動
主に H18 年度, H17 年度の研究成果を示す．
COE 関連の研究成果．
∗
招待論文，招待講演，基調講演など．
d
博士後期課程在籍の学生による成果．
m
上記以外の学生による成果．
†
[3]
d
[4]
d
佐野雅之， 船越満明, 放射状液体シート上の非線
形波動, 日本流体力学会誌 25-別冊 (2006) 214-214.
Y.Mizuno, M.Funakoshi, Reynolds-number dependence of fluid mixing in a spatially periodic threedimensional steady flow, Progress of Theoretical
Physics Supplement -161 (2006) 278-281.
平成 17 年度
[1]
1.1 学術論文
[2]
複雑系の数理解析グループ
応用解析学講座
†d
佐野雅之， 船越満明 , 放射状液体シート上の波動
の解析, 日本流体力学会誌 24-別冊 (2005) 208-208.
†d
Y. Mizuno, M. Funakoshi, Reynolds number dependences of velocity field and fluid mixing in partitionedpipe mixer, Journal of the Physical Society of Japan
74-5 (2005) 1479-1489.
平成 18 年度
[1]
†
木村正人，若野功, 亀裂親展に伴なうエネルギー解
法率の数学解析に関する再考察, 日本応用数理学会
論文誌 16-3 (2006) 345-358.
平成 17 年度
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[1]
藤原宏志、今井仁司、竹内敏己、磯祐介, 第 1 種積
分方程式の高精度数値計算について, 応用数理学会
論文誌 15-3 (2006) 419-434.
†
藤原宏志、磯祐介, 高速多倍長計算環境における数
値解析, 応用数理学会論文誌 15-3 (2006) 403-417.
[2]
†
藤原宏志、東森信就, スペクトル要素法による弾性
体方程式の数値シミュレーションについて, 第 55 回
理論応用力学講演会 (2006) 645-646.
[3]
†
日野正訓，中原健治, On singularity of energy measures on self-similar sets II, Bulletin of the London
Mathematical Society 38-6 (2006) 1019-1032.
[4]
†
日野正訓，熊谷隆, A trace theorem for Dirichlet
forms on fractals, Journal of Functional Analysis 238-2
(2006) 578-611.
[5]
†m
安部公輔, 確率微分方程式に対するある逆問題と
その数値解析, 京都大学数理解析研究所講究録 (2006)
in press.
†m
T. Miyoshi, Uniqueness in determination of a
straight crack by the two-dimensional wave equation,
Theoretical and Applied Mechanics JAPAN, Vol.54
(2005) 333-339.
†
久保 雅義, A Method to Estimate Channel Conductances Using a Hodgkin-Huxley Type Model, Proceedings of Czech-Japanese Seminar in Applied Mathematics -Vol.3 (2006) 88-94.
平成 18 年度
[2]
平成 18 年度
†
複雑系力学講座・非線形力学分野
[1]
複雑系力学講座・複雑系数理分野
†
田中泰明, 定常的挙動を示すシステムの破壊確率評
価のための高速モンテカルロ法, 構造物の安全性お
よび信頼性（Proc. of JCOSSAR 2007） (2007) 掲載
決定済み.
d
小川淳，田中泰明, 入力雑音のパワースペクトル特
性に着目した重点サンプリング法の構築, 構造物の安
全性および信頼性（Proc. of JCOSSAR 2007） (2007)
掲載決定済み.
†m
H. Tutu, Time-Delayed Feedback Method to Control Magnetic Orientation Dynamics in a Driven
Anisotropic Nanoparticle System, Progress of Theoretical Physics 116-6 (2006) 1005-1028.
†m
M. U. Kobayashi, H. Fujisaka, Determination of
Chaotic Dynamical Correlations in terms of Unstable
Periodic Orbits, Progress of Theoretical Physics 115-4
(2006) 701-715.
m
M. U. Kobayashi, T. Mizuguchi, Chaotically Oscillating interfaces in a Parametrically Forced System,
Physical Review E 73-1 (2006) 16212.
†
宮崎修次, カオス的区分線形写像としての有向ネッ
トワークとその大偏差統計, 情報処理学会学会論文
誌 47-3 (2006) 795-801.
†m
M. Yoshida, S. Miyazaki, H. Fujisaka, Irregular
parameter dependence of generalized diffusion coefficients based on large deviation statistical analysis,
Physica ｌ Review E 74-2 (2006) 026204(11 ページ).
平成 17 年度
[1]
[2]
[3]
†
H.Fujisaka, T.Yamada, G.Kinoshita, T.Kono, Chaotic
Phase Synchronization and Phase Diffusion, Physica D
205-Issues 1-4 (2005) 41-47.
†
H.Fujisaka, Progress of Theoretical Physics 114-1
(2005) 1-21.
†
H.Fujisaka, S. Uchiyama, T. Horita, Mapping Model
of Chaotic Phase Synchronization, Progress of Theoretical Physics 114-2 (2005) 289-299.
複雑系構成論講座・複雑系基礎論分野
平成 18 年度
[1]
∗
原田健自, 量子モンテカルロ法の最近の発展, 応用
数理 15 (2005) 28-44.
[2] M. Nomura, T. Aoyagi, Stability of Synchronous Solutions in Weakly Coupled Neuron Networks, Progress
of Theoretical Physics -113 (2005) 911-925.
[3] 青柳富誌生, 神経ネットワークにおける情報表現と
機能発現, システム/制御/情報 49-12 (2005) 482-487.
平成 17 年度
[1]
†
Y. Otani, T. Takahashi, N. Nishimura, Lecture Notes
in Appliedand Computational Mechanics -” 29 (M.
Schanz, O. Steinbach (eds))” (2007) 161-185.
[2] K. Harada, N. Kawashima, M. Troyer, DimerQuadrupolar Quantum Phase Transition in the QuasiOne-Dimensional Heisenberg Model with Biquadratic
Interaction, Journal of the Physical Society of Japan 76
(2007) 013703-1 - 013703-4.
[3]
[4]
[5]
[6]
[1]
†
K. Houzaki, Y. Otani, N. Nishimura, Contemporary Mathematics 408 (Eds. H. Ammari and H. Kang)
(2006) ”81-98 AMS,vidence”.
[3]
†
K. Kashima, Y. Yamamoto, System theory for numerical analysis, Automatica (2006).
平成 17 年度
[1]
大谷佳広，西村直志, 2 次元 Helmholtz 方程式の周
期境界値問題における高速多重極境界要素法, 応用
力学論文集 9 (2006) 261-271.
吉川仁， 川田朋和， 西村直志, レーザ超音波計測
による波形データを用いたクラック決定解析, 応用
力学論文集 9 (2006) 123-128.
藤山， 蚊野， 岩崎， 海部， 山本, サンプル値制御
理論を用いた圧縮オーディオ向け高域補正技術, シ
ステム制御情報学会論文誌 20-1 (2007) 31-38.
[2] 小林、藤岡, 音響ダクトに対する能動騒音制御系の
低コストな実装と計画換気システムへの応用, 日本
機械学会論文集 (C 編) 72 (2006) 3751-3758.
†
†
†
†
K. Kashima, H. Ozbay, Y. Yamamoto, A Hamiltonianbased solution to the mixed sensitivity problem for stable pseudorational plants, Systems and Control Letters
54-11 (2005) 1063-1068.
複雑流体現象の解明とそのモデリンググルー
プ
†
松村知樹， 川田朋和， 西村直志, 静弾性内部問題
の多重極積分方程式法における Galerkin 法と区分一
定選点法について, 計算数理工学論文集 6-1 (2006)
65-68.
[7] M. Nomura, Y. Sakurai, K. Kitano, T. Aoyagi, Applying the kernel method to multi-neuronal spike trains,
The First Symposium on Complex Medical Engineering (2006).
[8] M. Nomura, T. Tanaka, T. Kaneko, T. Aoyagi, Phase
analysis of inhibitory neurons involved in the thalamocortical loop, Progress of Theoretical Physics Supplement -161 (2006) 310-313.
[9] T. Takekawa, T. Aoyagi, T. Fukai, Synchronization
properties on slow oscillatory activity in a cortex network model, Progress of Theoretical Physics Supplement -161 (2006) 356-359.
[10] T. Aoki, T. Aoyagi, Synchrony-induced attractor transition in cortical neural networks organized by spiketiming dependent plasticity., Journal of Robotics and
Mechatronics 19-4 (2006).
流体理工学講座・分子流体力学分野
平成 18 年度
[1]
[2]
[3]
[1]
[2]
[3]
[12] T. Aoki, T. Aoyagi, Self-Organizing maps with Asymmetric Neighborhood function, Neural Computation
(2006).
[4]
[14] T. Aoki, T. Aoyagi, A Possible Role of Incoming Spike
Synchrony in Associative Memory Model with STDP
Learning rule, Progress of Theoretical Physics (2006).
平成 18 年度
†
S. Takata, F. Golse, Half-space problem of the nonlinear Boltzmann equation for weak evaporation and condensation of a binary mixture of vapors, Eur. J. Mech.
B-Fluids 26-1 (2007) 105-131.
†
H. Yoshida, K. A. and, Cylindrical Couette flow of a
vapor-gas mixture: Ghost effect and bifurcation in the
continuum limit, Phys. Fluids 18-8 (2006) 087103-116.
†
H. Yoshida, K. Aoki, Linear stability of the cylindrical
Couette flow of a rarefied gas, Phys. Rev. E 73-2 (2006)
021201-1-18.
†
S. Takata, K. Aoki, S. Yasuda, S. Kosuge, Phys. Fluids
18-6 (2006) 067102-1-13.
†
S. Taguchi, K. Aoki, V. Latocha, Vapor flows along a
plane condensed phase with weak condensation in the
presence of a noncondensable gas, J. Stat. Phys. 124-24 (2006) 321-369.
†
S. Yasuda, S. Takata, Aoki, Evaporation and condensation of a binary mixture of vapors on a plane condensed phase: Numerical analysis of the linearized
Boltzmann equation, Phys. Fluids 17-4 (2005) 0471051-19.
[5] S. Kosuge, K. Sato, S. Takata, K. Aoki, Flows of a
binary mixture of rarefied gases between two parallel
plates, Rarefied Gas Dynamics, edited by M. Capitelli
(2005) 150-155.
[6]
複雑系構成論講座・知能化システム分野
S. Takata, H. Sugimoto, S. Kosuge, Gas separation
by means of the Knudsen compressor, Eur. J. Mech.
B-Fluids 26-2 (2007) 155-181.
平成 17 年度
[11] T. Takekawa, T. Aoyagi, T. Fukai, Synchronous and
asynchronous bursting states: role of intrinsic neural dynamics, Journal of Computational Neuroscience
(2006).
[13] T. Aoki, T. Aoyagi, Synchrony-induced switching behavior of spike-pattern attractors created by
spike-timing dependent plasticity, Neural Computation
(2006).
†
†
H. Yoshida, K. Aoki, A numerical study of TaylorCouette problem for a rarefied gas: effect of rotation
of the outer cylinder, Rarefied Gas Dynamics, edited by
M. Capitelli (2005) 467-472.
[7]
†
S. Takata, Half-space problem of weak evaporation
and condensation of a binary mixture of vapors, Rarefied Gas Dynamics, edited by M. Capitelli (2005) 503508.
[1]
[2]
[8] K. Aoki, M. Hatano, S. Kosuge, S. Takata, Diffusiophoresis of a spherical volatile particle, Rarefied Gas
Dynamics, edited by M. Capitelli (2005) 713-718.
[9] A. V. Gusarov, K. Aoki, Ionization degree for strong
evaporation of metals, Phys. Plasmas 12-8 (2005)
083503-1-10.
[3]
[4]
航空宇宙基礎工学講座・流体力学分野
平成 18 年度
[1]
[2]
†
T. Inamuro, T. Ii, Lattice Boltzmann simulation of the
dispersion of aggregated particles under shear flows,
Mathmatics and Computers in Simulation 72 (2006)
141-146.
†
杉元 宏, 熱尖端流によって駆動される真空ポンプ
内の希薄気流の数値解析, 真空 49-8 (2006) 481-487.
[5]
[6]
平成 17 年度
[1]
[2]
[3]
[4]
†
K. Kobayashi, T. Inamuro, F. Ogino, Numerical simulation of advancing interface in a micro heterogeneous
channel, Journal of Chemical Engineering Japan 39
(2006) 257-266.
[7]
†
T. Inamuro, Lattice Boltzmann methods for viscous
fluid flows and two-phase fluid flows, Fluid Dynamics
Research 38 (2006) 641-659.
[8]
†
T. Ohwada, S. Fukata, Simple derivation of highresolution schemes for compressible flows by kinetic approach, Journal of Computational Physics 211
(2006) 424-447.
[9]
†
K. Kobayashi, Y. Yamaoka, T. Inamuro, F. Ogino, Unsteady interface phenomena in a micro channel, Computational Fluid Dynamics Journal 13 (2005) 697-702.
航空宇宙基礎工学講座・推進工学分野
[10]
[11]
平成 18 年度
[1]
[2]
[3]
†d
Y. Takao, K. Ono, K. Takahashi, K. Eriguchi,
Plasma Diagnostics and Thrust Performance Analysis
of a Microwave-Excited Microplasma Thruster, Jpn. J.
Appl. Phys. Vol. 45-No. 10B (2006) 8235-8240.
†d
Y. Osano, M. Mori, N. Itabashi, K. Takahashi,
K. Eriguchi, K. Ono, A Model Analysis of Feature
Profile Evolution and Microscopic Uniformity during
Polysilicon Gate Etching in Cl2/O2 Plasmas, Jpn. J.
Appl. Phys. Vo. 45-No. 10B (2006) 8157-8162.
平成 17 年度
K. Nakamura, T. Kitagawa, K. Osari, K. Takahashi,
K. Ono, Plasma etching of high-k and metal gate materials, Vacuum 80 (2006) 761-767.
†d
Y. Takao, K. Ono, K. Takahashi, Y. Setsuhara,
Microwave-sustained miniature plasmas for an ultra
small thruster, Thin Solid Films 506-507 (2006) 592596.
†
H. Kousaka, K. Ono, N. Umemura, I. Sawada,
K. Ishibashi, Plasma Distribution in a planar-type surface wave-excited plasma source, Thin Solod Films
506-507 (2006) 503-507.
†
K. Takahashi, K. Ono, Selective etching of high-k
HfO2 films over Si in hydrogen-added fluorocarbon
(CF4/Ar/H2 and C4F8/Ar/H2) plasmas, J. Vac. Sci.
Technol. 24-3 (2006) 437-443.
†m
T. Kitagawa, K. Nakamura, K. Osari, K. Takahashi,
K. Ono, M. Oosawa, S. Hasaka, M. Inoue, Etching
of High-k Dielectric HfO2 Films in BCl3-Containing
Plasmas Enhanced with O2 Addition, Jpn. J. Appl.
Phys. Part 2 45-No. 10 (2006) L297-L300.
†d
Y. Takao, K. Ono, Miniature electrothermal thruster
using microwavew-excited plasmas: A numerical design consideration, Plasma Sources Sci. Technol. 15No. 2 (2006) 211-227.
†d
Y. Osano, K. Ono, An Atomic Scale Model of Multilayer Surface Reactions and the Feature Profile Evolution during Plasma Etching, Jpn. J. Appl. Phys. ”Vol.
44, Part 1”-No. 12 (2005) 8650-8660.
†
K. Takahashi, K. Ono, Y. Setsuhara, Etching characteristics of high-k dielectric HfO2 thin films in inductively coupled fluorocarbon plasmas, J. Vac. Sci. Technol. A Vo. 23-No. 6 (2005) 1691-1697.
†
H. Kousaka, N. Umemura, K. Ono, J. Xu:,
Microwave-Excited High-Density Plasma Column
Sustained Along Metal Rod at Negative Voltage, Jpn.
J. Appl. Phys. ”Vo.l. 44, Part 2”-No. 36 (2005) L1154L1157.
†d
鷹尾祥典， 斧 高一, マイクロプラズマスラスター
の研究開発, 高温学会誌 第 31 巻-第 5 号 (2005) 283290.
†
K. Takahashi, K. Ono, Carbon clustering and diamond nucleation in fluorocarbon plasmas, New Vistas
in Dusty Plasmas (AIP Conference Proceedings Vol.
799) (2005) 189-192.
流体理工学講座・流体物理学分野
平成 18 年度
[1]
†
K. Takenaka, Y. Setsuhara, K. Nishisaka, A. Ebe,
S. Sugiura, K. Takahashi, K. Ono, Characterization of
Inductively-Coupled RF Plasma Sources with Multiple Low-Inductance Antenna Units, Jpn. J. Appl. Phys.
Vol. 45-No. 10B (2006) 8046-8049.
†d
[2]
[3]
†
N. Kihara, H. Hanazaki, T. Mizuya, H. Ueda, On the
relationship between the airflow at the critical height
and the momentum transfer to the traveling waves,
Phys. Fluids 19 (2007) 015102.
†
N. Kihara, H. Hanazaki, T. Mizuya, H. Ueda, On the
turbulent structures of flows over a traveling wave train,
JSME Int. J. Ser. B 49-4 (2006) 1181-1189.
†
木原直人、花崎秀史、植田洋匡, ２次元正弦進行波
上の運動量・スカラー輸送に関する 3 次元直接数値
計算, 土木学会論文集 B 62-4 (2006) 303-312.
[4]
[5]
[6]
[7]
[8]
[9]
†
河原源太・木田重雄・L..van Veen, 乱流に埋め込ま
れた不安定周期運動, 日本機械学会論文集 B 編 第 7
２巻-第 724 号 (2006) 2870-2877.
†
†
[4] 馬場雄也， 黒瀬良一, Large-Eddy Simulation による
旋回噴流中の粒子飛散挙動の解明, 日本機械学会論
文集（B 編） 73-725 (2007) 357-364.
G. Kawahara, S. Kida, L. van Veen, Unstable periodic
motion in turbulent flows, Nonlinear Process in Geophysics -13 (2006) 499-507.
木田重雄・渡部 威・田谷貴男, 周期流を用いたク
エット乱流の解析, 京大数理研講究録 -1496 (2006)
23-30.
[5]
†
後藤 晋・石井伸和・木田重雄・西岡通男, 二軸回転
する球体流れの実験, 京大数理研講究録 -1496 (2006)
1-7.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
d
H. Watanabe, R. Kurose, S. M. Hwang, F. Akamatsu,
Characteristics of flamelet in spray flames formed in
a laminar counterflow, Combustion and Flame 148
(2007) 234-248.
†
[6] R. Kurose, H. Makino, N. Hashimoto, A. Suzuki, Formation mechanism of particulate matter in coal combustion, Powder Technology 172 (2007) 50-56.
†
[7] 馬場雄也， 黒瀬良一, 噴霧燃焼の数値シミュレーショ
ンにおける Flamelet/progress-variable 法の有効性, 日
本機械学会論文集（B 編） (2007) 印刷中.
H. Yoshimoto, S. Goto, Self-similar Clustering of Inertial Particles in Homogeneous Turbulence, J. Fluid
Mech. -577 (2007) 275-286.
S. Goto, J. Vassilicos, Self-similar Clustering of Inertial Particles and Zero-acceleration Points in Fully Developed Two-dimensional Turbulence, Phys. Fluids -18
(2006) 115103.
[8]
平成 17 年度
[1]
d
渡邊裕章， 黒瀬良一， 小森 悟, 複雑なバーナ
形状を有する石炭燃焼炉内旋回流に対する Largeeddy Simulation, 日本機械学会論文集（B 編） 73-725
(2007) 342-349.
[3]
†
L. van Veen, S. Kida, G. Kawahara, Periodic motion
representing isotropic turbulence, Fluid Dyn. Res. -38
(2006) 19 - 46.
[9]
†
L. Chen, S. Goto, J. Vassilicos, Turbulent Clustering of Stagnation Points and Inertial Particles, J. Fluid
Mech. 553 (2006) 143-154.
†
後藤 晋・木田重雄, 流体線や面の伸長率のレイノル
ズ数依存性, 京大数理研講究録 -1434 (2005) 35 - 42.
†
渡部 威・木田重雄, クエット乱流における粒子輸
送, 京大数理研講究録 -1454 (2005) 125 - 134.
†
木田重雄・河原源太, 等方乱流を表す不安定周期運
動, 京大数理研講究録 -1454 (2005) 179 - 186.
†
P. R. Jackson, C. R. Rehmann, J. A. Saenz,
H. Hanazaki, Rapid distortion theory for differential
diffusion, Geophysical Research Letters 32-10 (2005)
L10601-10604.
†
花崎秀史, 成層乱流中のパッシブスカラとアクティ
ブスカラの輸送に与える粘性・拡散性の効果, 日本
機械学会論文集 B 編 第 71 巻 (2005) 1322-1328.
†
木原直人、花崎秀史、植田洋匡, 大気・海洋間での
物質交換過程に風波が及ぼす影響に関する数値的研
究, 海岸工学論文集 52 (2005) 61-65.
†
木原直人、花崎秀史、植田洋匡、水矢亨, 進行する
風波上の流れにおける乱流構造, 日本機械学会論文
集 B 編 第 71 巻-第 712 号 (2005) 2914-2921.
流体理工学講座・環境熱流体工学分野
平成 18 年度
[10]
†d
K. Sugioka, S. Komori, Drag and lift forces acting on
a spherical water droplet in homogeneous linear shear
air flow, Journal of Fluid Mechanics 570 (2007) 155157.
†
K. Nagata, Y. Sakai, S. Komori, T. Kubo, Velocity
and Passive Scalar Cross Spectra in Stably and Unstably Stratified Grid Turbulence, Journal of Fluid Science
and Technology 2-1 (2007) 109-119.
†
長田孝二，伊藤陽人，酒井康彦，小森 悟, 日本機
械学会論文集 (B 編) 73-728 (2007) 印刷中.
[11] 黒瀬良一， 牧野尚夫， 島田 裕， 引野健治, 脱硝
触媒内の流れ挙動が劣化に及ぼす影響, 日本エネル
ギー学会誌 85-6 (2006) 471-474.
[12] 馬場雄也， 黒瀬良一， 赤松史光, 層流拡散火炎片方
程式の解法とその解特性に関する一考察, 日本機械
学会論文集（B 編） 72-720 (2006) 2033-2040.
[13] 渡邊裕章， 黒瀬良一， 黄 承敏， 赤松史光, 噴霧
火炎の火炎片特性（第１報 一般特性と伸張率の
影響）, 日本機械学会論文集（B 編） 72-720 (2006)
2056-2063.
[14] 渡邊裕章， 黒瀬良一， 黄 承敏， 中村摩理子， 赤
松史光, 日本機械学会論文集（B 編） 72-720 (2006)
2064-2071.
[15] 中村摩理子, 赤松史光, 黒瀬良一, 香月正司, 噴霧燃
焼数値解析における気相−油滴間熱移動とパーセル
モデルの検証, 日本機械学会論文集（B 編） 72-723
(2006) 2792-2797.
[16] M. Nakamura, F. Akamatsu, R. Kurose, M. Katsuki, Experimental and numerical study on combustion
mechanism of liquid fuel spray in gaseous flame, JSME
International Journal Series B 49-2 (2006) 498-505.
[17] S. M. Hwang, R. Kurose, F. Akamatsu, H. Tsuji,
H. Makino, M. Katsuki, JSME International Journal
Series B 49-4 (2006) 1316-1327.
[1] 黒瀬良一， 道岡武信， 牧野尚夫， 小森 悟, 触媒内
の流れ挙動が粒子の壁面付着に及ぼす影響, 粉体工
学会誌 44-2 (2007) 107-112.
[18] S. M. Hwang, R. Kurose, F. Akamatsu, H. Tsuji,
H. Makino, M. Katsuki, JSME International Journal
Series B 49-4 (2006) 1328-1335.
[2] 道岡武信， 黒瀬良一, Large-Eddy Simulation による
旋回噴流中の粒子飛散挙動の解明, 日本機械学会論
文集（B 編） 73-725 (2007) 1-8.
[19] Y. Ito, S. Komori, A vibration technique for promoting
liquid mixing and reaction in a microchannel, AIChE J.
52-9 (2006) 3011-3017.
[20]
[21]
†d
大西 領，高橋桂子，小森 悟, 乱流中での粒子
の衝突成長に対する Large-Eddy Simulation, 日本機
会学会論文集（B 編） 72-722 (2006) 2441-2448.
†
長田孝二，相良文彦，小森 悟，J.C.R. Hunt，P.A.
Davidson, 日本機械学会論文集 (B 編) 72-717 (2006)
1174-1180.
平成 17 年度
航空宇宙基礎工学講座・流体数理学分野
平成 18 年度
[1]
D. Zhao, Y. Toba, K. Sugioka, S. Komori, New sea
spray generation function for spume droplets, Journal
of Geophysical Research 111 (2006) c02007.
[1]
†d
R. Onishi, S. Komori, Thermally-Stratified Liquid
Turbulence with a Chemical Reaction, AIChE Journal
52-2 (2006) 456-468.
[2]
[3] 伊藤靖仁，竹中直史，小森悟, 微細管内での気液間
物質移動 , 日本機械学会論文集 B 編 72-715 (2006)
584-589.
[3]
[2]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
†d
杉岡健一，小森悟, 一様せん断流中の流形液滴に働
く抗力と揚力の評価, 日本機械学会論文集 B 編 71-706
(2005) 1519-1526.
M. Nagata, Linear stability of flow in an internally
heated rectangular duct, Journal of Fluid Mechanics
551(50) (2006) 387-404.
†
M. Nagata, Nonlinear secondary flow through a rotating channel, Journal of Fluid Mechanics 564(50)
(2006) 25-55.
†
G. Kawahara, Energy dissipation in spiral vortex layers wrapped around straight vortex tube, Physics of
Fluids 17-5 (2005) 055111-1-13.
†
G. Kawahara, Laminarization of minimal plane Couette flow: Going beyond the basin of attraction of turbulence, Physics of Fluids 17-4 (2005) 041702-1-4.
長田孝二，J. C. R. Hunt, 日本機械学会論文集 B 編
71-709 (2005) 2218-2225.
†m
長田孝二，相良文彦，小森悟，J. C. ，R. Hunt, 日
本機械学会論文集 B 編 71-709 (2005) 2226-2232.
†d
高垣直尚，小森悟, 気液界面を通しての物質移動に
及ぼす降雨の影響, 日本機械学会論文集 B 編 71-712
(2005) 2900-2906.
物性工学講座・熱物理工学分野
平成 18 年度
[1]
†d
大西領，小森悟, 乱流中における同一径粒子間の
衝突頻度に及ぼす重力の影響, 日本機械学会論文集
B 編 71-705 (2005) 1225-1230.
†d
大西領，小森悟, 乱流中における同一径粒子間の
衝突頻度に及ぼす重力の影響のモデル化, 日本機械
学会論文集 B 編 71-706 (2005) 1511-1518.
[2]
†
牧野俊郎， 若林英信, 熱ふく射の分光選択放射機能
をもつ表面の開発, 日本機械学会論文集 (B 編) 72-721
(2006) 2741.
†
牧野俊郎， 若林英信, 薄膜系により放射される熱ふ
く射球面波の干渉, 日本機械学会論文集 (B 編) 72-723
(2006) 2256.
平成 17 年度
†d
今城貴徳，長田孝二，小森悟, 波状壁面上の乱流
構造と抗力に及ぼすうねりの影響, 日本機械学会論
文集 B 編 71-706 (2005) 1504-1510.
平成 18 年度
[2]
[4]
†
†
機械材料力学講座・熱材料力学分野
[1]
K. Hiwatashi, P. H. Alfredsson, N. Tillmark, M. Nagata, Experimental observations of instabilities in rotating planeCouette flow, Physics of Fluids 19(50) (2007).
平成 17 年度
†
[1]
†
†
K. Tatsumi, E. Shinohara, F. Okamoto, Y. Kitaoka,
K. Nakabe, Mixing characteristics of multi-jets modified by cyclic perturbation, JSME Int. J. (Ser. B) 49-4
(2006) 959-965.
†
田中美也子，巽和也，ウッドフィールド・ピーター，
中部主敬, 管内マルチ噴流の混合性能に及ぼす旋回
と浮力の効果, 日本機械学会論文集（B 編） 72-722
(2006) 2554-2561.
[3] D. Cvetinovic, M. Ukai, K. Nakabe, K. Suzuki, Velocity Measurements and Flow Structure Visualizations of
a Self-Sustained Oscillating Jet, Thermal Science - An
International Journal 10-2 (2006) 113-125.
[4] H. Iwai, K. Tatsumi, K. Suzuki, Effect of the plate thermal resistance on the heat transfer performance of a
corrugated thin plate heat exchanger, Heat Transfer Asian Research 35-3 (2006) 209-223.
航空宇宙システム工学講座・熱工学分野
平成 18 年度
[1] 吉田英生，石部英臣，吉冨 聡，齋藤元浩，松井裕
樹，江川 猛，岩井 裕，坪田宏之，桑原健雄，金
丸一宏, 水蒸発による静圧効果が付加された超微細
多孔質体ハイブリッド気体軸受, 日本機械学会論文
集（B 編） 72-722 (2006) 2562-2569.
[2] H. Iwai, K. Tatsumi, K. Suzuki, Effect of the Plate
Thermal Resistance on the Heat Transfer Performance
of a Corrugated Thin Plate Heat Exchanger, Heat
Transfer-Asian Research -Mar.35 (2006) pp. 209-223.
[3] H. IWAI, S. KAWAKAMI, K. SUZUKI, J. TSUJII,
T. ABIKO, Performance of Wire Springs as Extended
Heat Transfer Surface for Compact Heat Exchangers,
Journal of Thermal Science and Technology Vol. 1No.2 (2006) pp. 78 - 89.
平成 17 年度
[1] T. Nishino, H. Iwai, K. Suzuki, Comprehensive Numerical Modeling and Analysis of a Cell-Based Indirect
Internal Reforming Tubular SOFC, Trans.ASME Journal of Fuel Cell Science and Technology (2006) FC-051011.
[2] H. Yoshida, The wide variety of possible applications
of micro-thermofluid control, Microfluid Nanofluid 1-4
(2005) 289-300.
[3] H. Iwai, T. Ishikawa, H. Yoshida, Numerical study of
SOFC based on electrolyte with mixed ionic and electronic conductivity, Thermal Science and Engineering
13-4 (2005) 37-38.
[4] K. Tatsumi, H. Iwai, K. Suzuki, The Effects of Oblique
Discrete Rib Arrangement on Heat Transfer Performance of a Square Duct, 日本ガスタービン学会誌 33-6
(2005) 589-598.
[5] 西野貴文，岩井裕，鈴木健二郎, 円筒型間接内部改
質 SOFC の包括的数値シミュレーション, 日本機械
学会論文集（B 編） 71-711 (2005) 2800-2807.
[6] 岩井裕，巽和也，鈴木健二郎, 凹凸プレート熱交換
器におけるプレート内部熱抵抗の影響, 日本機械学
会論文集（B 編） 71-705 (2005) 1406-1413.
複雑構造材料の特性解析グループ
ナノサイエンス講座・量子物性学分野
平成 18 年度
[1]
[2]
[3]
[4]
[5]
†d
P. Szarek, A. Tachibana, The field theoretical study
of chemical interaction in terms of the Rigged QED:
new reactivity indices, Journal of Molecular Modeling
(2007).
†
P. Ordon, A. Tachibana, Nuclear Stiffness in Search
for Maximum Hardness Principle and for Softest State
along the Chemical Reaction path, Journal of Chemical
Physics (2007).
†
K. Doi, H. Nakano, H. Ohta, A. Tachibana, FirstPrinciple Molecular-Dynamics Study of Hydrogen and
Aluminum Nanowires in Carbon Nanotubes, Material
Science Forum 539-543 (2007) 1409-1414.
†
K. Doi, N. Maida, K. Kimura, A. Tachibana, FirstPrinciple Study on Crystal Growth of Ga and N layers
on GaN substrate, Physica Status Solidi C (2007).
†d
H. Nakano, H. Ohta, A. Yokoe, K. Doi,
A. Tachibana, First-Principle Molecular-Dynamics
Study of Hydrogen Adsorption on an Aluminumdoped Carbon Nanotube, Journal of Power Sources
163 (2006) 125-134.
平成 17 年度
[1]
[2]
[3]
[4]
†∗
A. Tachibana, A New Visualization Scheme of
Chemical Energy Density and Bonds in Molecules,
Jounal of Molecular Modeling 11-4-5 (2005) 301-311.
†
P. Ordon, A. Tachibana, Nuclear Reactivity Indices
within Regional Density Functional Theory, Jounal of
Molecular Modeling 11-4-5 (2005) 312-316.
†
P. Ordon, A. Tachibana, Investigation of the Role of
the C-PCM Solvent Effect in Reactivity Indices, Jounal
of Chemical Science 117 (2005) 583-.
†d
K. Doi, K. Fujitani, N. Kadowaki, K. Nakamura,
A. Tachibana, Structures and Electronic States of
Gadolinium Oxide Clusters, Japanese Journal of Applied Physics 44-8 (2005) 6115-6223.
[5]
†m
N. Ibuta, F. Sagara, K. Doi, K. Nakamura,
A. Tachibana, Y. Ishihara, K. Suzuki, Reaction Processes of Germane Molecules with Catalytic Water,
Japanese Journal of Applied Physics 44-6A (2005)
4133-4141.
[6] †d K. Doi, K. Yoshida, H. Nakano, A. Tachibana,
T. Tanabe, Y. Kojima, K. Okazaki, Ab Initio Calculation of Electron Effective Masses in Solid Pentacene,
Jounal of Applied Physics 98-11 (2005) 113709-1113709-7.
物性工学講座・光工学分野
平成 18 年度
[1] A.Iwamae, M.Atake, A.Sakaue, R.Katai, M.Goto,
S.Morita, Polarization separated Zeeman spectra from
magnetic dipole transitions in highly charged argon in
the Large Helical Device, Phsycs of Plasma (2007).
[2] †m M.Okuda, K.Deguchi, A.Iwamae, H.Nakamura,
K.Sawada, M.Hasuo, Simulation of optical near field
of a sub-wavelength gold slit array and its electric
quadrupole interaction with 1s excitons in Cu2O, physica status solidi (c) 3 (2006) 3547.
[3] † M.Hasuo, A.Shimamoto, T.Fijiwara, Morphology
changes of CuCl thin films induced by photoirradiation, physica status solidi (c) 3 (2006) 3520.
[4] †m R.Kondo, S.Tojo, T.Fujimoto, M.Hasuo, Shift and
broadening in attenuated total reflection spectra of the
hyperfine structure resolved D2 line of dense rubidium
vapor, Phys. Rev. A 73 (2006) 62504.
[5] † T.Fujimoto, M.Hasuo, M.Nimura, Cross Sections for
Polarization Relaxation of Excited Neon Atoms by Helium Atom Collisions: Disalignment and Disorientation, J. of Plasma and Fusion Res. SERIES 7 (2006)
210.
平成 17 年度
[1] M.H.Naka, Y.Arima, H.Iwata, M.Hasuo, Y.Fuwa,
Y.Morita, K.Ikeuchi, A novel technique for evaluation
of articular cartilage lubrication based on the surface
plasmons resonance, Tribology and Interface Engineering Series 48 (2005).
[2] †m A. Shimamoto, T. Fujiwara, A. Iwamae, T. Fujimoto, M. Hasuo, Exciton Luminescence of CuCl Associated with a New Bound State Generated by Long
Time Photo-irradiation, J. Phys. Soc. Jpn 74 (2005)
1625.
[3] † M. Hasuo, A. Shimamoto, N. Okuda, T. Fujiwara,
A. Iwamae, T. Fujimoto, Free Z3 Exciton Luminescence spectra of Vapor-deposited CuCl Films, J. Phys.
Soc. Jpn 74 (2005) 3077.
[4] †m M. Nimura, T. Imagawa, M. Hasuo, T. Fujimoto,
Relaxation of atomic state multipoles by radiation reabsorption: Neon 2p2 atoms in a discharge plasma, J.
Quant. Spectroc. Rad 96 (2005) 547.
[5] † A. Iwamae, T. Sato, Y. Horimoto, K. Inoue, T. Fujimoto, M. Uchida, T. Maekawa, Anisotropic electron
velocity distribution in an ECR helium plasma as determined from polarization of emission lines, Plasma
Phys. Control. Fusion 47 (2005) L41.
物性工学講座・材料物性学分野
平成 18 年度
[1] Y. Umeno, Y. Kinoshita, T. Kitamura, Ab initio DFT
simulation of ideal shear deformation of SiC polytypes,
Modelling and Simulation in Materials Science and Engineering 15 (2007) 27-37.
[2]
†
T. KITAMURA, H. HIRAKATA, D. V. TRUONG,
Initiation of Interface Crack at Free Edge between Thin
Films with Weak Stress Singularity, Thin Solid Films
515 (2007) 3005-3010.
[3] K. Ngampungpis, H. Hirakata, T. Kitamura, Increase
of Stress Intensity near Free-edge of Elastic-creeping
Bi-Material Interface under a Sustained Load, Key Engineering Materials 340-341 (2007) 501-506.
[4] M. Kamaya, Y. Kawamura, T. Kitamura, ThreeDimensional Local Stress Analysis on Grain Boundaries in Polycrystalline, International Journal of Solid
and Structure 44 (2007) 3267-3277.
[5] T. Kitamura, H. Hirakata, K. Nagmpungpis, Stress
Field near Free-Edge of Elastic-Creep Bi-material Interface, Engineering Fracture Mechanic 74 (2007)
1637-1648.
[6] 梅野宜崇，北村隆行，多川元気, Atomic Analysis of
Unstable Deformation in Amorphous Metal, Materials
Science Forum 539-543 (2007) 1994-1999.
[7] Y. Kinoshita, Y. Umeno, T. Kitamura, Evaluation of
Strain Concentration in Carbon Nanotube with Bend
Junction, Key Engineering Materials 340-341 (2007)
101-106.
[8]
平方寛之，高橋可昌，Do Van Truong，北村隆行, 透
過型電子顕微鏡によるナノ構造体の界面端はく離の
その場観察 In Situ TEM Observation of Delamination
at Interface Edge in Nano-Structure, 材料 55-12 (2006)
1073-1080.
[10] 釜谷昌幸，北村隆行, 3 次元多結晶モデルによる応力
腐食割れ発生局所応力評価 Evaluation of Local Stress
Corrosion Crack Initiation by Three-Dimensional Polycrystal Model, 材料 55-11 (2006) 1027-1032.
[12]
†
H. Hirakata, Y. Takahashi, S. Matsumoto, T. Kitamura, Dominant Stress Region of Crack Initiation at
Interface Edge of Micro-dot on Substrate, Engineering
Fracture Mechanics 73 (2006) 2698-2709.
†
土井祐介，山寄優，中谷彰宏，北村隆行, 非線形
相互作用によるエネルギー局在構造（非線形局在
モード）と材料の原子・分子スケールでのダイナ
ミックスへの応用 Localized Structures in Nonlinear
Lattice Systems—Intrinsic Localized Mode and Its Application to Dynamics of Atoms in Materials, 材料 55-7
(2006) 700-705.
平成 17 年度
[1]
[3] 山本真人，緒方隆志，北村隆行, Ni 基一方向凝固超
合金の高温疲労き裂伝ぱ駆動力に及ぼす結晶粒構
成の影響 Effect of Microstructural Inhomogeneity on
Driving Force of High-Temperature Crack Propagation
of Ni-Based Directionally Solidified Superalloy, 材料
55-3 (2006) 264-270.
[4] 釜谷昌幸，北村隆行, 多結晶体中における微視組織
的微小き裂の応力拡大係数, 日本機械学会論文集（A
編） 72-715 (2006) 293-300.
[5] T. Shibutani, T. Kitamura, M. Shiratori, Effect of Grain
Boundary/Interface Network on Cavity Growth Due to
Atom Migration Induced by Stress and Electric Current
in Polycrystalline LSI Conductor, Defect and Diffusion
Forum 249 (2006) 247-254.
[6] 北村隆行，梅野宜崇，尚福林，嶋田隆広，若原嘉鶴人
, 日本機械学会論文集（A 編） 72-718 (2006) 817-822.
[7] Y. UMENO, A. KUSHIMA, T. KITAMURA,
P. GUMBSCH, J. LI, Mechanical instability in nonuniform atomic structure: application to amorphous
metal, Materials Science and Engineering: A (2006).
[8] M. Kamaya, T. Kitamura, Influence of Microstructure
on Small Crack Behavior, Key Engineering Materials
297-300 (2005) 1165-1171.
[9]
†
[9] Y. Umeno, T. Shimada, T. Kitamura, C. Elsasser, Ab
Initio DFT Study of Starin Effects on Ferroelectricity at PbTiO3 Surfaces, Physical Review B 74 (2006)
174111.
[11]
[2] 北村隆行，梅野宜崇，木下祐介, 曲部を有するカー
ボンナノチューブの不均一ひずみ評価 Evaluation
of nonuniform Strain in Carbon Nanotube with Bend
Junction, 日本機械学会論文集（A 編） 72-718 (2006)
811-816.
†
D. V. Truong, H. Hirakata, T. Kitamura, Effect of
Loading Frequency on Fatigue Crack Growth between
a Submicron-Thick Film and a Substrate, JSME International Journal 49-3 (2006) 370-375.
†
H. Hirakata, M. Kitazawa, T. Kitamura, Fatigue Crack
Growth along Interface between Metal and Ceramics
Submicron-thick Films in Inert Environment, Acta Materialia 54 (2005) 89-97.
[10] Y. Umeno, A. Kushima, T. Kitamura, P. Gumbsch,
J. Li, Ab Initio Study of the Surface Properties and
the Ideal Strength of (100) Silicon Thin Films, Physical Review B 72 (2005) 165431.
[11]
†
F. Shang, T. Kitamura, H. Hirakata, Delamination Test
and the Effect of Free Edge on Interface Strength of
PZT Thin Films, Journal of Integrated Ferroelectrics
73 (2005) 67-74.
構造材料強度学講座
平成 18 年度
[1] T.Nojima, K.Saito, Development of Newly Designed
Ultra-Light Core Structures, JSME International Journal 49-1 (2006) 38-42.
平成 17 年度
[1] 小川欽也, 衝撃力を受ける気球皮膜の貫通挙動 54-11
(2005) 1166-1172.
[2] 小川 欽也，そり町 直輝，長尾 敬智, 厚い翼型
を用いたグライダーバルーンの飛行シミュレーショ
ン, ブイヤント航空 33 (2005).
ナノサイエンス講座・ナノ物性工学分野
[5]
平成 18 年度
[1]
[2]
[3]
†
M. Suzuki, K. Nagai, S. Kinoshita, K. Nakajima,
K. Kimura, T. Okano, K. Sasakawa, Vapor phase
growth of Al whiskers induced by glancing angle deposition at high temperature, Appl. Phys. Lett. 89-13
(2006) 133103.
†d
Z. Ming, K. Nakajima, M. Suzuki, K. Kimura,
M. Uematsu, K. Torii, S. Kamiyama, Y. Nara,
H. Watanabe, K. Shiraishi, T. Chikyow, K. Yamada,
An isotopic labeling study of the oxygen diffusion in
HfO2/SiO2/Si, Appl. Phys. Lett. 88-20 (2007) 203121.
S. Tamehiro, T. Matsushita, K. Nakajima,
M. Suzuki, K. Kimura, Neutralization of slow
C60+ ions in front of KCl(001), Nucl. Instr. and
Methods B 256 (2007) 16-20.
†
K. Nakajima, A. Nakamoto, M. Suzuki, K. Kimura,
Convoy electrons emitted by 2 MeV He+ ions at grazing incidence on KCl(001), Nucl. Instr. and Methods B
248 (2006) 21-24.
[6] B. Brijs, T. Sajavaara, S. Giangrandi, T. Janssens,
T. Conard, K. Arstila, K. Nakajima, K. Kimura,
A. Bergma, The analysis of a thin SiO2/Si3N4/SiO2
stack: A comparative study of low-energy heavy ion
elastic Rutherford backscattering and secondary ion
mass spectroscopy, Nucl. Instr. and Methods B 249
(2006) 847-850.
平成 17 年度
[1]
[2]
[3]
[4]
[7]
†m
[4] T. HATTORI, H. NOHIRA, K. AZUMA, K. W.
SAKAI, K. NAKAJIMA, M. SUZUKI, K. KIMURA,
Y. SUGITA, E. IKENAGA, K. KOBAYASHI,
Y. TAKATA, H. KONDO, S. ZAIMA, STUDY OF
THE GATE INSULATOR/SILICON INTERFACE
UTILIZING SOFT AND HARD X-RAY PHOTOELECTRON SPECTROSCOPY AT SPring-8,
International Journal of High Speed Electronics and
Systems 16-1 (2006) 353-364.
[5]
[6]
†
†
K. Nakajima, R. Imaizumi, M. Suzuki, K. Kimura,
Accumulation of hydrogen near the interface between
ultrathin SiO2 and Si(001) under ion irradiation in
high-resolution elastic recoil detection, Nucl. Instr. and
Methods B 249 (2006) 425-428.
†
K. Nakajima, M. Suzuki, K. Kimura, M. Yamamoto,
A. Teramoto, T. Ohmi, T. Hattori, Lattice Distortion at
SiO2/Si(001) Interface Studied with High-Resolution
RBS/Channeling, Jpn. J. Appl. Phys 45 (2006) 24672469.
†d
Z. Ming, K. Nakajima, M. Suzuki, K. Kimura,
M. Uematsu, K. Torii, S. Kamiyama, Y. Nara, K. Yamada, Si emission from the SiO2/Si interface during
the growth of SiO2 in the HfO2/SiO2/Si structure,
Appl. Phys.Lett 88 (2006) 153516.
バイオエンジニアリング講座・バイオマイクロシス
テム工学分野
平成 18 年度
[1] S. H. Hsiao, Y. Tanaka, A. Ide-Ektessabi, Adhesion
Property of ITO Film on Polymer Treated by Linear Ion
Source, Materials Research Society -936 (2006) 27.
[2] T. Yamaguchi, S. H. Hsiao, Y. Tanaka, A. IdeEktessabi, Ion beam modification of polyimide with
linear ion source, Materials Research Society -908E
(2006) 7.1.
[3] S. H. Hsiao, T. Yamaguchi, Y. Tanaka, A. IdeEktessabi, Simultaneous Deposition of ITO Film on
Ion Beam Treated Polymers, Materials Research Society -908E (2006) 6.1.
[4] Y. Morimoto, Y. Tanaka, A. Ide-Ektessabi, Investigation of effects of ion beam irradiation on properties of
magnesium oxide films, Materials Research Society 908E (2006) 3.1.
平成 17 年度
M. Suzuki, W. Maekita, YoshinoriWada, K. Nakajima,
K. Kimura, T. Fukuoka, Y. Mori, In-line aligned and
bottom-up Ag nanorods for surface-enhanced Raman
spectroscopy, Appl. Phys. Lett. 88 (2006) 20312.
[1] A. Ide-Ektessabi, T. Yamaguchi, Y. Tanaka, RBS and
XPS analysis of the composite calcium phosphate coatings for biomedical applications, Beam Interactions
with Materials & Atoms -B 241 (2005) 685-688.
m
[2] A. Ide-Ektessabi, Y. Ota, R. Ishihara, Y. Mizuno,
T. Takeuchi., Distribution of lead in the brain tissues
from DNTC patients using synchrotron radiation microbeams, Beam Interactions with Materials & Atoms
-B 241 (2005) 681-684.
W. Sakai, K. Nakajima, M. Suzuki, K. Kimura,
B. Brijs, Observation of the interfacial layer in
HfO2(10nm)/Si by high-resolution RBS in combination with grazing angle sputtering, Nucl. Instr. and
Methods B 249 (2006) 238-241.
†m
S. Hosoi, K. Nakajima, M. Suzuki, K. Kimura,
Y. Shimizu, S. Fukatsu, K. M. Itoh, M. Uematsu,
H. Kageshima, K. Shiraishi, Observation of Si emission during thermal oxidation of Si(001) with highresolution RBS, Nucl. Instr. and Methods B 249 (2006)
390-393.
m
T. Matsushita, W. Sakai, K. Nakajima, M. Suzuki,
K. Kimura, A. Agarwal, H.-J. Gossmann, M. Ameen,
H. Harima, Measurement of the strain in strainedSi/Si0.79Ge0.21 with HRBS/channeling, Nucl. Instr.
and Methods B 249 (2006) 432-435.
機械材料力学講座・適応材料力学分野
平成 18 年度
[1]
†
M. Hojo, M. Hashimoto, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, Direct measurement of mechanical properties of Bi2223 filament using
Ag alloy removed tape, Physica C: Superconductivity
and its applications (2007).
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
†
K. Sato, T. Adachi, D. Ueda, M. Hojo, Y. Tomita,
Measurement of Local Strain on Cell Membrane at Initiation Point of Calcium Signaling Response to Applied
Mechanical Stimulus in Osteoblastic Cell, Journal of
Biomechanics (Online060802) (2007).
Filaments from Superconducting Composite Wire and
Resin Impregnation Method, Physica C: Superconductivity and its applications 445-448 (2006) 814-818.
[14]
†
中澤嘉明, 田村憲司, 日下貴之, 北條正樹, 薄肉多角
形部材の塑性座屈挙動に及ぼす断面形状因子の影響,
日本機械学会論文集，Ａ編 73-727 (2007) 331-337.
†
T. Hobbiebrunken, B. Fiedler, M. Hojo, M. Tanaka,
Experimental determination of the true epoxy resin
strength using micro-scaled specimens, Composites
Part A 38 (2007) 814-818.
[15]
†
S. Miyabe, T. Nakano, T. Ishimoto, N. Takano,
T. Adachi, H. Iwaki, A. Kobayashi, K. Takaoka,
Y. Umakoshi, Two-Dimensional Quantitative Analysis of Preferential Alignment of BAp c-axis for Isolated Human Trabecular Bone Using Microbeam Xray Diffractometer with a Transmission Optical System, Materials Transactions 48-3 (2007) 1-5.
[16]
[17]
†
S. Ochiai, Y. Sakai, K. Kuhara, S. Iwamoto, J. Sha,
H. Okuda, M. Tanaka, M. Hojo, Y. Waku, N. Nakagawa, S. Sakata, A. Mitani, M. Saito, T. Ishikawa, Analytical modeling of stress-strain behavior at 1873K of
alumina/YAG composite compressed parallel and perpendicular to the solidification direction, Composite
Science and Technology 67 (2007) 270-277.
†
S. Ochiai, D. Doko, H. Okuda, S. Oh, D. Ha,
M. Tanaka, M. Hojo, K. Osamura, M. Miura, Influence of applied tensile and bending strains on local
and overall critical current of multifilamentary Bi2223composite superconductor, Materials Science Forum
539-543 (2007) 919-924.
†
M. Hojo, M. Nakamura, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, Effects of Spatial
Distribution of Defects on Bending Deformation and
Critical Current in Bi2223/Ag Superconducting Composite Tapes, Materials Science Forum 539-543 (2007)
739-744.
†
T. Hobbiebrunken, M. Hojo, T. Adachi, C. D.
Jong, B. Fiedler, Evaluation of interfacial strength in
CF/epoxies using FEM and in-situ experiments, Composites Part A: Applied Science and Manufacturing
(2006) 2248-2256.
†
K. Sato, T. Adachi, Y. Shirai, N. Saito, Y. Tomita, Local Disassembly of Actin Stress Fibers Induced by Selected Release of Intracellular Tension in Osteoblastic
Cell, Journal of Biomechanical Science and Engineering 1-1 (2006) 204-214.
†
K. Tsubota, T. Adachi, Computer Simulation Study
on Local and Integral Mechanical Quantities at Single
Trabecular Level as Candidates of Remodeling Stimuli,
Journal of Biomechanical Science and Engineering 1-1
(2006) 124-135.
†
安達泰治，児山欣典，北條正樹，冨田佳宏, 海綿骨
欠損内の骨梁構造形成に及ぼす力学的因子の影響, 日
本臨床バイオメカニクス学会誌 27 (2006) 1-7.
†
M. Hojo, T. Matsuoka, M. Hashimoto, M. Tanaka,
M. Sugano, S. Ochiai, K. Miyashita, Direct Measurement of Elastic Modulus of Nb3Sn Using Extracted
[18]
†
S. Ochiai, D. Doko, H. Rokkaku, H. Fujimoto,
H. Okuda, M. Hojo, M. Tanaka, M. Sugano, K. Osamura, M. Mimura, Variation of local critical current
and its influence on overall current of bent multifilamentary Bi2223/Ag tape, Physica C: Superconductivity and Its Applications 445-448 (2006) 746-750.
†
B. Fiedler, de Claas Jong, T. Hobbiebrunken, M. Hojo,
K. Schulte, Micro/macro-mechanical approach of first
ply failure in CFRP, Journal of Materials Science 41-20
(2006) 6760-6767.
†
K. Sato, T. Adachi, Y. Shirai, N. Saito, Y. Tomita, Local Disassembly of Actin Stress Fibers Induced by Selected Release of Intracellular Tension in Osteoblastic
Cell, Journal of Biomechanical Science and Engineering 1-1 (2006) 204-214.
†
T. Kusaka, M. Hojo, T. Fukuoka, M. Ishibashi, Effect
of loading rate on the modes I and II fracture behavior
of Zanchor reinforced composites, Journal de Physique
134 (2006) 1105-1111.
†
山東 篤，櫛田慶幸，高野直樹，安達泰治，中野
貴由，馬越佑吉，石本卓也，榎元孝俊，河井まりこ，
山本敏男, 生体硬組織の高分解能イメージベース・マ
ルチスケール・モデリング, 日本計算工学会論文集
(2006) ”Online Journal 論文番号 20060017，8 pages.
”.
平成 17 年度
[1] Y. Hirose, N. Hojo, A. Fujiyoshi, G. Matsubara, Suppression of interfacial crack for foam core sandwich
panel with crack arrester, Advanced Composite Materials 16-1 (2007) 11-30.
[2] T. Hobbiebrunken, M. Hojo, T. Adachi, C. D.
Jong, B. Fiedler, Evaluation of Interfacial Strength in
CF/Epoxies using FEM and In-situ Experiments, Composites Part A: Applied Science and Manufacturing
(2006) 2248-2256.
[3] M. Hojo, T. Matsuoka, M. Hashimoto, M. Tanaka,
M. Sugano, S. Ochiai, K. Miyashita, Direct Measurement of Elastic Modulus of Nb3Sn Using Extracted Filaments from Superconducting Composite
Wire and Resin Impregnation Method, Physica C Superconductivity and Its Applications 445-448 (2006)
814-818.
[4] M. Hojo, T. Ando, M. Tanaka, T. Adachi, S. Ochiai,
Y. Endo, Mode I and II interlaminar fracture toughness
and fatigue delamination of CF/epoxy laminates with
self-same epoxy interleaf, International Journal of Fatigue 28-10 (2006) 1154-1165.
[5] Y. Hirose, M. Nishitani, S. Ochi, K. Fukumoto,
T. Kawasaki, M. Hojo, Proposal of suppression of delamination for the foam core sandwich panel joint with
filler, Advanced Composite Materials 15-3 (2006) 319339.
[6] T. Adachi, Y. Osako, M. Tanaka, M. Hojo, S. J. Hollister, Framework for optimal design of porous scaffold
microstructure by computational simulation of bone regeneration, Biomaterials 27-21 (2006) 3964-3972.
[7] M. Hojo, S. Matsuda, M. Tanaka, S. Ochiai, A. Murakami, Mode I delamination fatigue properties of
interlayer-toughened CF/epoxy laminates, Composites
Science and Technology 66-5 (2006) 665-675.
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
†
S. Ochiai, T. Ishida, D. Doko, K. Morishita, H. Okuda,
S. Oh, D. H., M. Hojo, M. Tanaka, M. Sugano, K. Osamura, A Monte Carlo-shear lag simulation of tensile
fracture behaviour of Bi2223 filament, Superconductor
Science and Technology 18-12 (2005) S232-S240.
†
M. Hojo, M. Nakamura, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, Analysis of mesoscopic stress states with delamination and their relation to critical current under bending deformation in
Bi2223/Ag superconducting composite tapes, Superconductor Science and Technology 18-12 (2005) S356S363.
[2]
[3]
[4]
[5]
†
M. Hojo, M. Nakamura, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, Influence of
delamination location on mesoscopic stress state
and critical current under bending deformation in
Bi2223/Ag superconducting composite tapes, Physica
C -Superconductivity and Its Applications 426-431-Part
2 (2005) 1205-1210.
[6]
[7]
†
寺村聡，富田直秀，原田恭治，闕上凱，前北渉，安
達泰治，鈴木基史, ナノスケールで表面形状を制御
した材料上における細胞培養, 日本臨床バイオメカ
ニクス学会 26 (2005) 227-232.
[8]
†
S. Ochiai, S. Iwamoto, T. Tomida, H. Okuda,
M. Tanaka, M. Hojo, Thermal stress-induced fracture
of coating layer of galvannealed steel, Composite Interfaces 12-7 (2005) 655-668.
[9]
†
S. Ochiai, T. Tomida, M. Tanaka, M. Hojo, H. Okuda,
Fracture and debonding behavior of coated brittle alumina layer on ductile aluminum substrate wire, Composite Interfaces 12-3-4 (2005) 311-324.
[10]
†
S. Ochiai, Y. Sakai, K. Sato, M. Tanaka, M. Hojo,
H. Okuda, Y. Waku, N. Nakagawa, S. Sakata,
A. Mitani, T. Takahashi, Fracture characteristics of
Al2O3/YAG composite at room temperature to 2023 K,
Journal of the European Ceramic Society 25-8 (2005)
1241-1249.
[11]
†
[12]
†
[13]
B. Fiedler, S. Holst, T. Hobbiebrunken, M. Hojo,
K. Schulte, Modelling of the initial failure of CFRP
structures by partial discretisation: a micro/macromechanical approach of first ply failure, Advanced
Composite Letters 13-5 (2005) 219-226.
B. Fiedler, A. Gagel, T. Hobbiebrunken, K. Schulte,
M. Hojo, S. Ochiai, Modelling of the transverse
strength of fibre reinforced epoxy composite at low and
high temperature, Composite Interfaces 12-3-4 (2005)
379-394.
[14]
機械材料力学講座・固体力学分野
[15]
平成 18 年度
[1]
†d
S. TAKASHIMA, N. MIYAZAKI, T. IKEDA,
M. NAKAGAKI, Elastic-plastic constitutive equation
accounting for microstructure, Key Engineering Materials 340-341 (2007) 1037-1042.
[16]
†m
Y. KUBOTA, R. MATSUMOTO, M. NAKAGAKI,
Molecular Dynamics Analysis on Crack Growth Behavior in Single and Noano-crystalline Fe, Key Engineering Materials 340-341 (2007) 985-990.
†
R. MATSUMOTO, T. HAYASHIDA, M. NAKAGAKI, Molecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement of -Fe by Equal Channel Angular Pressing, Key
Engineering Materials 340-341 (2007) 967-972.
†
松本龍介，宮崎則幸, ナノ結晶分散アモルファス金
属の力学特性 (分子動力学法を用いた結晶粒子配置
の影響と最大強度に関する検討), 日本機械学会論文
集 (A 編) 72-724 (2006) 2000-2007.
†d
永井政貴，池田 徹，宮崎則幸, 三次元異方性異
種材界面き裂の応力拡大係数解析, 日本機械学会論
文集 (A 編) 72-724 (2006) 1992-1999.
†
N. MIYAZAKI, N. KOIZUMI, Analysis of Cracking
of lLithium Tantalate (LiTaO3) Single Crystals Due
to Thermal Stress, Journal of Materials Science 41-19
(2006) 6313-6321.
†
R. MATSUMOTO, M. NAKAGAKI, Mechanical
Properties of Amorphous Metal with Dispersed
Nanocrystalline Particles: Molecular Dynamics Study
on Crystal Volume Fraction and Size Effects, JSME International Journal 49-3 (2006) 513-521.
†m
荻野洋岳，宮崎則幸，真淵俊朗，縄田輝彦, 単結
晶アニール後の複屈折シミュレーション, 日本結晶
成長学会誌 33-4 (2006) 141-146.
†m
松本直樹，宮崎則幸, 化合物半導体単結晶のイン
ゴットアニール過程における転位密度評価解析, 日
本計算工学会論文集 (2006) 論文番号 20060028.
†m
松本壮平，宮崎則幸, 半導体薄膜中の転位密度の
有限要素解析, 日本計算工学会論文集 (2006) 論文番
号 20060025.
†
T. IKEDA, W. K. KIM, N. MIYAZAKI, Evaluation of
the Delamination in a flip Chip Using Anisotropic Conductive Adhesive Films under Moisture/Reflow Sensitivity Test, IEEE Transactions on Components and
Packaging Technology 29-3 (2006) 551-559.
†
T. IKEDA, M. NAGAI, K. YAMANAGA,
N. MIYAZAKI, Stress Intensity Factor Analyses
of Interface Cracks between Dissimilar Anisotropic
Materials Using the Finite Element Methods, Engineering Fracture Mechanics 73-14 (2006) 2067-2079.
†
松本龍介，林田登志男，中垣通彦, 準３次元条件下
での ECAP によるα鉄における結晶微細化過程の分
子動力学解析, 材料 55-7 (2006) 693-699.
†
R. MATSUMOTO, M. NAKAGAKI, Size and
volume-fraction effects of dispersed nanocrystalline
particles on the elastic constants and flow stress of
metallic glass, Modelling and Simulation in Materials
Science and Engineering 14-15 (2006) S47-S54.
†
小金丸正明，池田 徹，宮崎則幸, ピエゾ抵抗テス
トチップと有限要素解析を用いた樹脂封止に起因す
る半導体チップ表面の残留応力, エレクトロニクス
実装学会誌 9-3 (2006) 186-194.
†
N. MIYAZAKI, Y. MATSUURA, D. IMAHASE,
Thermal Stress Analysis of Lead Molybdate Single
[17]
Crystal during Growth Process: Discussion on the
Relation between Themal Stress and Crystal Quality,
Journal of Crystal growth 289-2 (2006) 659-662.
ナノシステム創成工学講座・ナノ・マイクロシステ
†
平成 18 年度
松本龍介，中垣通彦, ナノ結晶分散アモルファス
の力学特性 (粒子寸法効果発現についての分子動力
学解析), 日本機械学会論文集 (A 編) 72-716 (2006)
361-368.
ム工学分野
[1]
平成 17 年度
[1]
[2]
[3]
[4]
†d
永井政貴，山長 功，池田 徹，宮崎則幸, 熱応力
下の異方性異種材界面き裂の応力拡大係数解析, 日
本機械学会論文集 (A 編) 72-715 (2006) 285-292.
†
池田 徹，李 徳甫，宮崎則幸, 接着継手の破壊靭
性値に与える接着剤層厚さの影響とそのメカニズム
について, 日本接着学会誌 42-3 (2006) 97-105.
†
W.-K. KIM, 池田 徹, 宮崎則幸, 異方性導電樹脂
接合型フリップチップの吸湿リフロー試験のはく離
予測解析, エレクトロニクス実装学会誌 8-3 (2005)
215-224.
†
宮崎則幸, 単結晶製造プロセスと材料強度に関する
研究 71-704 (2005) 587-593.
平成 18 年度
[1]
†
I. Kanno, T. Inoue, T. Suzuki, H. Kotera, K. Wasa,
Electric field-induced strain of PbZrO3 films, Japanese
Journal of Applied Physics 45-9B (2006) 7258-7261.
平成 17 年度
[1] Y. Ichikawa, T. Matsunaga, M. Hassan, I. Kanno,
T. Suzuki, K. Wasa, Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut
strontium titanate substrates, JOURNAL OF MATERIALS RESEARCH 21-5 (2006) 1261-1268.
[2] K. Wasa, S. Ito, K. Nakamura, T. Matsunaga, I. Kanno,
T. Suzuki, H. Okino, T. Yamamoto, S. H. Seo, D. Y.
Noh, Electromechanical coupling factors of singledomain 0.67Pb(Mg1/3Nb2/3)O3-0.33 PbTiO3 singlecrystal thin films, Applied Physics Letters 88 (2006)
122903.
[3]
[4]
†
J. Loverich, I. Kanno, H. Kotera, Concepts for a new
class of all-polymer micropumps, Lab on a Chip 6
(2006) 1147-1154.
平成 17 年度
[1] F. Dang, K. Kakehi, J. Cheng, O. Tabata, M. Kurokawa,
K. Nakajima, M. Ishikawa, Y. Baba, Hybrid Dynamic Coating with n-Dodecyl b-D-Maltoside and
Methyl Cellulose for High-Performance Carbohydrate
Analysis on Poly(methyl methacrylate) Chips, Anal.
Chem.2006 -78 (2006) pp.1452-1458.
[2]
†
Y. Hirai, S. Hafizovic, N. Matsuzuka, J. G. Korvink,
O. Tabata, Validation of X-Ray Lithography and Development Simulation System for Moving Mask Deep
X-Ray Lithography, Journal of Microelectromechanical Systems 15-1 (2006) pp.159-168.
[3] H. Yagyu, S. Hayashi, O. Tabata, Fabrication of Plastic Micro Tip Array using Laser Micromachining of
Nanoparticles Dispersed Polymer and Micromolding,
IEEJ Transactions on Sensors and Micromachines 1261 (2005) pp.7-13.
[4] H. Yagyu, S. Koji, S. Hayashi, O. Tabata, Micropowder blasting with nanoparticles dispersed polymer mask
for rapid prototyping of glass chip, JOURNAL OF MICROMECHANICS AND MICROENGINEERING 15-6
(2005) pp.1236-1241.
[5]
†
N. Matsuzuka, Y. Hirai, O. Tabata, A novel fabrication process of 3D microstructures by double exposure in deep x-ray lithography (D2XRL), JOURNAL
OF MICROMECHANICS AND MICROENGINEERING 15 (2005) pp.1-7.
[6] A. Ishida, M. Sato, O. Tabata, W. Yoshikawa, Shape
Memory Thin Films Formed with Carruousel-type
magnetron sputtering Apparatus, Smart Materials and
Structures 14 (2005) S216-S222.
[7]
†
T. Suzuki, I. Kanno, J. J. Loverich, H. Kotera,
K. Wasa, Sensors and Actuators A 125 (2006) 382-386.
[5] 鈴木孝明， 秦秀敏， 新宅博文， 神野伊策， 小寺秀
俊, 圧電アクチュエータを用いた進行波型バルブレス
マイクロポンプの開発, 日本 AEM 学会誌 13 (2005)
310-315.
[8]
[6] 新宅博文， 川野聡恭， 鈴木孝明， 神野伊策， 小寺
秀俊, マイクロチャネルにおける液体微粒化法とそ
の特性解析, 日本機械学会論文集 (B 編） 71 (2005)
2007-2012.
[9]
[7] 新宅博文， 川野聡恭， 神野伊策， 小寺秀俊, mTAS
用パッシブミキサーにおける流体混合と物質移動特
性, 日本機械学会論文集 (B 編） 71 (2005) 111-116.
Y. Hirai, Y. Inamoto, K. Sugano, T. Tsuchiya,
O. Tabata, Moving mask UV lithography for threedimensional structuring, J. Micromech. Microeng 17
(2007) pp. 199-206.
[2] Y. Nakamura, O. Tabata, Moving Mask Direct PhotoEtching (M2DPE) for 3D Micromachining of Polytetrafluoroethylene, IEEJ Transactions on Sensors and
Micromachines, 126-7 (2006) pp.499-503.
ナノシステム創成工学講座・ナノメトリックス工学
分野
d
[10]
†
N. Matsuzuka, O. Tabata, Algorithm to Derive Optimal Mask and Movement Patterns in Moving Mask
Deep X-ray Lithography (M2DXL), IEEJ Trans. SM,
125-5 (2005) pp.222-228.
†
T. Tsuchiya, M. Hirata, N. Chiba, R. Udo, Y. Yoshitomi, T. Ando, K. Sato, K. Takashima, Y. Higo, Y. Saotome, H. Ogawa, K. Ozaki, Journal of Microelectromechanical Systems 14-5 (2005) pp. 1178-1186.
†
T. Tsuchiya, Tensile testing of silicon thin films, Fatigue and Fracture of Engineering Materials and Structures 28 (2005) pp. 665-674.
†
T. Tsuchiya, M. Hirata, N. Chiba, Thin Solid Films
484 (2005) pp. 245-250.
マイクロシステム創成講座・マイクロ加工システム
[4]
分野
平成 18 年度
平成 17 年度
[1]
†
津守不二夫，栗原史和，小寺秀俊，島進, 磁場中粉
体成形における粉末流動のキャビティ形状による影
響, 粉体および粉末冶金 52-6 (2005) 458-463.
[2] 津守不二夫，原康洋，安富亮太，島進, 半固形モー
ルド粉体成形法による薄板形状部品の作製および解
析, 粉体および粉末冶金 52-6 (2005) 453-457.
谷口忠大， 椹木哲夫, 汎化行為概念の適応的獲得—
双シェマモデルベースの強化学習—, 計測自動制御
学会論文集 42-3 (2006).
平成 17 年度
[1]
[2]
[3]
複雑系の制御・設計論グループ
[4]
機械力学講座・メカトロニクス分野
平成 18 年度
[1] E. B. V. Poorten, Y. Yokokohji, Feeling a Rigid Virtual
World through an Impulsive Haptic Display, Advanced
Robotics 21-11 (2007).
†
[5]
†
堀口由貴男，椹木哲夫，桑谷雅之, 遠隔操作ロボッ
トを用いた探索行為における技能解析と生態学的考
察, 日本知能情報ファジィ学会誌 17-4 (2005) 441-449.
†d
M. Bando, H. Nakanishi, A Stable Approach for
Modular Learning and Its Application to Autonomous
Aero-Robot, Journal of Robotics and Mechatronics 181 (2006) 44-50.
†
中西弘明, 井上紘一, ニューラルネットワークの学習
による確率的な不確かさに対するロバスト制御系の構
築法, 計測自動制御学会論文集 42-6 (2006) 611-617.
†m
谷口忠大，椹木哲夫, 身体と環境の相互作用を
通じた記号創発：表象生成の身体依存性についての
構成論, システム制御情報学会論文誌 18-12 (2005)
440-449.
†
Q. Wei, T. Sawaragi, Y. Tian, A Bounded Multi-Goals
Optimization Using an Organizational Decision Model,
Advanced Engineering Informatics 19-1 (2005) 67-78.
平成 17 年度
[1] Y. Yokokohji, S. Chaen, T. Yoshikawa, Evaluation of
Traversability of Wheeled Mobile Robots on Uneven
Terrains by Fractal Terrain Model, Advanced Robotics
21-1 (2007) 121-142.
[2] E. Poorten, Y.Yokokohji, T.Yoshikawa, Stability Analysis and Robust Control for Fixed Scaled Teleoperation, Advanced Robotics 20-6 (2006) 681-706.
[3]
航空宇宙システム工学講座・最適システム設計工学
分野
平成 18 年度
[1]
†
Y. Yokokohji, N. Muramori, Y. Sato, T. Yoshikawa,
Designing an Encountered-Type Haptic Display for
Multiple Fingertip Contacts based on the Observation
of Human Grasping Behavior, International Journal of
Robotics Research 24-9 (2005) 717-730.
[2]
[4] M. Kurisu, Y. Yokokohji, Y. Siokawa, T. Samejima,
Development of a Laser Range Finder for 3D MapBuilding in Rubble, Advanced Robotics 19-3 (2005)
273-294.
[5] K. Hayashi, Y. Yokokohji, T. Yoshikawa, TeleExsistence Vision System with Image Stabilization for
Rescue Robots, Journal of Robotics and Mechatronics
17-2 (2005) 181-188.
[3]
[4]
機械システム創成学講座
平成 18 年度
[1]
[2]
[3]
†
T. Sawaragi, Y. Liu, Y. Tian, Human-Machine Collaborative Knowledge Creation: Capturing Tacit Knowledge by Observing Expert’s Demonstration of Load Allocation, International Journal of Knowledge and Systems Sciences 3-2 (2006) 9-11.
†d
Y. Liu, Y. Tian, T. Sawaragi, Applying DBR and
MAS to Solving Container Loading Problem, 知能と
情報 18-6 (2006) 837-848.
†
谷口忠大， 椹木哲夫, 報酬設計を通した社会的相互
作用による行為概念群の構築：シェマ理論に基づい
た累増的強化学習, 知能と情報 18-4 (2006) 629-640.
[5]
†
M. Yoshimura, M. Taniguchi, K. Izui, S. Nishiwaki,
Hierarchical Arrangement of Characteristics in Product
Design Optimization Problems for Deeper Insight into
Optimized Results, Transactions of the ASME, Journal
of Mechanical Design 128-4 (2006) 701-709.
†
K. Mogami, S. Nishiwaki, K. Izui, M. Yoshimura,
N. Kogiso, Reliability-Based Topology Optimization
of Frame Structures for Multiple Failure Criteria Using Topology Optimization Techniques, Structural and
Multidisciplinary Optimization 32-4 (2006) 299-311.
†
Y. Maeda, S. Nishiwaki, K. Izui, M. Yoshimura,
K. Matsui, Structural Topology Optimization of Vibrating Structures with Specified Eigen-frequencies and
Eigen-mode Shapes, International Journal for Numerical Methods for Engineering 67-5 (2006) 597-628.
†
最上克哉，西脇眞二，泉井一浩，吉村允孝，小木
曽望, 複数の信頼性評価基準を考慮したトポロジー
最適化（剛性と固有振動数を評価基準とした場合）,
日本機械学会論文集 (C 編) 72-718 (2006) 1679-1777.
†
吉村， 允孝; 泉井， 一浩; 深谷， 一真, 代替案の階
層関係および制約関係を考慮した階層型遺伝的アル
ゴリズム, 精密工学会誌論文集 72-4 (2006) 831-848.
平成 17 年度
[1]
†
M. Yoshimura, Y. Fujimi, K. Izui, S. Nishiwaki,
Decision-making Support System for Human Resource
Allocation in Product Development Projects, International Journal of Production Research 44-5 (2006)
831-848.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
†
M. Yoshimura, S. Yoshida, Y. Konishi, K. Izui,
S. Nishiwaki, Y. Inamori, A. Nomura, K. Mitsuyuki,
Y. Kawaguchi, T. Inagaki, A Rapid Analysis Method
for Production Line Design, International Journal of
Production Research 44-6 (2006) 1171-1192.
平成 17 年度
[1]
m
[2]
m
[3]
m
[4]
m
小林正和，西脇眞二，泉井一浩，吉村允孝, 設計者
の創造性と最適設計法に基づいたコンプライアント
メカニズムの創成設計法, 精密工学会誌 71-11 (2005)
1464-1469.
[5]
m
†
小林正和，吉村允孝，泉井一浩, コミュニケーション
プロセスの可視化の基づいたコラボレーション支援
システムの構築, 日本機械学会論文集（C 編） 71-707
(2005) 2370-2377.
上西甲朗, 松久寛, 宇津野秀夫, 朴正圭, 自動車の
車体衝突特性とシートベルトが乗員の衝撃に及ぼす
影響, 日本機械学会論文集 C 編 71-706 (2005) 18771883.
[6]
m
†
K. Saitou, K. Izui, S. Nishiwaki, P. Papalambros, A
Survey of Structural Optimization in Mechanical Product Development, Transaction of the ASME, Journal of
Computing and Information Science in Engineering 53 (2005) 214-226.
†
竹澤晃弘，斉藤真大，西脇眞二，泉井一浩，吉村
允孝, フレーム要素を用いたトポロジー最適化（固
有振動数最大化を目的とした場合）, 日本機械学会
論文集（C 編） 71-710 (2005) 3018-3025.
†
竹澤晃弘，西脇眞二，泉井一浩，吉村允孝, 離散化
構造要素を用いたトポロジー最適化（フレーム要素
の断面主軸方向を設計変数として考慮した場合）, 日
本機械学会論文集（C 編） 71-706 (2005) 1962-1969.
†
前田泰典，西脇眞二，泉井一浩，吉村允孝，松井
和己，寺田賢二郎, 振動特性を設計目標とする機械
構造物のトポロジー最適化, 日本機械学会論文集（C
編） 71-703 (2005) 813-820.
平成 18 年度
Y. LIU, H. MATSUHISA, H. UTSUNO, J. G. PARK,
Vibration isolation by a variable stiffness and damping
system, International Journal of the Japan Society of
Mechanical Engineers (Series C) 48-2 (2005) 305-310.
上西甲朗, 松久寛, 宇津野秀夫, 朴正圭, 自動車正面
衝突における乗員力学モデルの構築, 日本機械学会
論文集 C 編 71-704 (2005) 1231-1237.
平成 18 年度
[1]
[3]
d
山田啓介，松久寛，宇津野秀夫，朴正圭, 圧電素
子を用いた柔軟構造物のハイブリッド多モード制振,
日本機械学会論文集 C 編 73-726 (2006) 461 − 469.
[2] 松久寛，宇津野秀夫，磯野充典, コロオリ力を用い
た動吸振器による索道搬器の制振, 日本機械学会論
文集 C 編 72-722 (2006) 3170-3176.
[3] Y. Liu, H. Matsuhisa, H. Utsuno, J. G. Park, Vibration control by a Variable damping and stiffness system
with magnetorheological dampers, JSME International
Journal (Series C) 49-2 (2006) 411-417.
[4] Y. Liu, H. Matsuhisa, H. Utsuno, J. G. Park, Variable
damping and stiffness vibration control with magnetorheological fluid dampers for two degree-of freedom
system, JSME International Journal (Series C) 49-1
(2006) 156-162.
[6]
奥山智尚，松久寛，宇津野秀夫，朴正圭, 伝達関
数補間を用いた評価点移動時の能動騒音制御, 日本
機械学会論文集 C 編 71-710 (2005) 58-65.
航空宇宙システム工学講座・制御工学分野
機械力学講座・振動工学分野
[5]
山田啓介，松久寛，宇津野秀夫，朴正圭, インダク
タンスを用いた圧電素子の電気機械結合係数の高精
度な測定法, 日本機械学会論文集 C 編 71-710 (2005)
50-57.
†
[2]
[1]
山田啓介，松久寛，宇津野秀夫，朴正圭, 圧電素子
と LR 回路を用いた受動制振の定点理論による最適
設計, 日本機械学会論文集 C 編 71-707 (2005) 85-92.
†d
T. OKUYAMA, H. MATSUHISA, H. UTSUNO,
J. G. PARK, Active Noise Control for a Moving Evaluation Point Using Transfer Function Interpolation,
JSME International Journal (Series C) 49-3 (2006)
865-872.
d
山田啓介，松久寛，宇津野秀夫，朴正圭, 圧電素子を
用いた柔軟構造物のハイブリッド制振に関する研究,
日本機械学会論文集 C 編 72-716 (2006) 1145-1153.
†
M. Shibata, A. Ichikawa, Orbital rendezvous and flyaround based on null controllability with vanishing
energy, Journal of Guidance, Control, and Dynamics
(2007).
†
A. Ichikawa, Null controllability with vanishing energy for discrete-time systems in Hilbert spce, SIAM
Journal on Control and Optimization (2007).
†
A. Ichikawa, H. Katayama, Output regulation of timevarying systems, Systems and Control Letters 55-12
(2006) 999-1005.
[4] T. Kohda, H. Fujihara, Accident Occurrence Conditions in Railway Systems, International Journal of Performability Engineering 3-1(Part II) (2007) 105-116.
[5] T. Kohda, A Simple Method to Derive Minimal Cut
Sets for a Non-Coherent Fault Tree, International Journal of Automation and Computing 3-2 (2006) 151-156.
平成 17 年度
[1]
[2]
†m
M. Bando, H. Nakanishi, A Stable Approach for
Modular Learning and Its Application to Autonomous
Aero-Robot, Journal of Robotics and Mechatronics 181 (2006) 44-50.
†
中西弘明, 井上紘一, ニューラルネットワークの学
習による確率的な不確かさに対するロバスト制御系
の構築法, 計測自動制御学会論文集 (2006).
[3] H. Katayama, A. Ichikawa, Output feedback receding
horizon stabilization and H ∞ control for time-varying
discrete-time systems, International Journal of Systems
Science 38-1 (2007) 73-85.
[4] T. Kohda, K. Inoue, A Method to Obtain Accident Seqeunces of Complex Systems, Int. Journal of Performability Engineering 1-1 (2005) 65-78.
航空宇宙力学講座
[5]
平成 18 年度
[1]
[2]
[3]
†
S. Aoi, K. Tsuchiya, Adaptive Behavior in Turning of
an Oscillator-driven Biped Robot, Autonomous Robots
(2007).
†
S. Aoi, H. Sasaki, K. Tsuchiya, A Multi-legged Modular Robot That Meanders: Investigation of Turning
Maneuvers Using its Inherent Dynamic Characteristics,
SIAM Journal on Applied Dynamical Systems (2007).
†
S. Aoi, K. Tsuchiya, Gait Transition from
Quadrupedal to Bipedal Locomotion of an Oscillatordriven Biped Robot, International Journal of Advanced
Robotic Systems (2007).
平成 17 年度
[1]
[2]
[3]
[4]
†d
S. Aoi, K. Tsuchiya, Self-stability of a Simple Walking Model Driven by a Rhythmic Signal, Nonlinear Dynamics 48-1-2 (2007) 1-16.
†m
H. Okano, R. Onmori, N. Tomita, Y. Ikada, Effects of a Moderate-Intensity Static Magnetic Field on
VEGF-A Stimulated Endothelial Capillary Tubule Formation in Vitro., Bioelectromagnetics 27 (2006) 628640.
平成 17 年度
[1] 柴田延幸，富田直秀, 再生用 scaffold −軟骨細胞系
ミクロ有限要素モデルの構築, 日本臨床バイオメカ
ニクス学会誌 26 (2005) 19-25.
[2] 寺村聡，富田直秀，原田恭治，闕 上凱，前北渉，安
達泰治，鈴木基史, ナノスケールで表面形状を制御
した材料上における細胞培養, 日本臨床バイオメカ
ニクス学会誌 26 (2005) 227-232.
[3] 山本浩司，門林義幸，中嶋正明，富田直秀, 生体環
境設計のための状態還移モデルの作成, 日本臨床バ
イオメカニクス学会誌 26 (2005) 291-296.
†d
[4] 闕 上凱，原田恭治，富田直秀, Effect of sliding mechanical force on regenerated cartilage tissue construct
in vitro., 日本臨床バイオメカニクス学会誌 26 (2005)
297-303.
†d
[5] 山本浩司，甲斐元崇，玉島康優，園部正人，森田有
亮，池内健，小泉孝之，辻内伸好，玉田靖，富田直
秀, 再生軟骨の摩擦・摩耗特性, 日本臨床バイオメカ
ニクス学会誌 26 (2005) 97-102.
S. Aoi, K. Tsuchiya, Bifurcation and Chaos of a Simple Walking Model Driven by a Rhythmic Signal, International Journal of Non-Linear Mechanics 41-3 (2006)
438-446.
S. Aoi, K. Tsuchiya, Stability Analysis of a Simple
Walking Model Driven by an Oscillator with a Phase
Reset Using Sensory Feedback, IEEE Transactions on
Robotics 22-2 (2006) 391-397.
†d
S. Aoi, K. Tsuchiya, Locomotion Control of a
Biped Robot Using Nonlinear Oscillators, Autonomous
Robots 19-3 (2005) 219-232.
[5] K. Tsujita, H. Toui, K. Tsuchiya, Dynamic Turning
Control of a Quadruped Locomotion Robot using Oscillators, Advanced Robotics -19 (2005) 1115-1133.
[6] 杉本靖博，大須賀公一, 受動的動歩行の安定性に関
する一考察–ポアンカレマップの構造解釈からのア
プローチ–, システム制御情報学会論文誌 -18 (2005)
255-260.
バイオエンジニアリング講座・医療工学分野
[6] Y. Harada, N. Tomita, M. Nakajima, K. Ikeuchi,
S. Wakitani, Effect of Low Loading and Joint Immobilization For Spontaneous Repair of Osteochondral Defect in the Knees of Weightless (tail suspension) Rats,
J. Orthop. Sci. 10 (2005) 508-514.
[7] Y. Morita, N. Tomita, H. Aoki, M. Sonobe, S. Wakitani,
Y. Tamada, T. Suguro, K. Ikeuchi, Frictional Propertics
of Regend Cartilage in Vitro, JOUNAL OF BIOMECHANICS 39-1 (2005) 103-109.
[8] K. Hattori, T. Yoshikawa, Y. Takakura, H. Aoki,
M. Sonobe, N. Tomita, Bio-Artifical Periosteum for
Severe Open Fracture-An Experimental Study of Osteogenic Cell / Collagen Sponge Composite as a
Bio-Artificial Periosteum, BIO-MEDICAL MATERIALS AND ENGINEERING 15-3 (2005) 127-136.
平成 18 年度
[1]
[2]
[3]
[4]
†d
K. Yamamoto, N. Tomita, Y. Fukuda, S. Suzuki,
N. Igarashi, T. Suguro, Y. Tamada, Time-dependent
Changes in Adhesive Force between Chondrocytes
and Silk Fibroin Substrate, Biomaterials 28-10 (2007)
1838-1846.
†d
C. Shang-kai, Y. Tachibana, H. Uyama,
S. Kobayashi, N. Tomita, Evaluation of Chondrocytes Expression Embedded in Thermoresponsive
Poly(amino acid)s with Sol-Gel Transition, Tissue
Engineering 13-3 (2007) 未定.
†d
C. Shang-kai, N. Tomita, K. Yamamoto, Y. Harada,
M. Nakajima, T. Terao, Y. Tamada, Transplantation of
Allogeneic Chondrocytes Cultured in Fibroin Sponge
and Stirring Chamber to Promote Cartilage Regeneration, Tissue Engineering 13-3 (2007) 483-492.
†m
可知直芳、富田直秀, 細胞凝集体の作製とその機
能評価, 日本臨床バイオメカニクス学会誌 27 (2006)
83-88.
生産システム工学講座・生産システム工学分野
平成 18 年度
[1]
†
水山 元，淺田克暢，山田賢太郎, 決定木分析援用型
多段階品質情報推移モデルの提案 - 多段階品質情報
推移モデルに基づく品質データマイニングの研究 (第
2 報) -, 日本経営工学会論文誌 57-3 (2006) 214-221.
[2] 木村圭志， 山品 元， 水山 元， 柴田大介, 加工点分
析と拡張 Su-Field 分析を統合した革新的製品開発プ
ロセス, 精密工学会誌 72-8 (2006) 1054-1059.
平成 17 年度
[1] 水山 元，山品 元，木村圭志，多々良里美, 加工点分
析を用いた革新的製品開発プロセスの提案, 精密工
学会誌 72-3 (2006) 348-354.
[2] 水山 元，池田龍哉, 多段階生産システムでの工程間の
因果関係に着目した品質改善対象工程の同定支援アプ
ローチ, 日本経営工学会論文誌 56-3 (2005) 209-217.
[3] 水山 元，淺田克暢，山田賢太郎, ロジスティック回帰
援用型多段階品質情報推移モデルの提案 - 多段階品
質情報推移モデルに基づく品質データマイニングの
研究 (第 1 報) -, 日本経営工学会論文誌 56-2 (2005)
129-138.
[4] H. Mizuyama, Statistical Robust Design of a Complex
System through a Sequential Approach, Journal of Engineering Design 16-2 (2005) 259-276.
[5] 山品 元，石田賢一，水山 元, 本質的対立に着目した新
たな IPDP の提案, 精密工学会誌 71-2 (2005) 216-222.
マイクロシステム創成講座・精密計測加工学分野
平成 18 年度
[1]
d
A. A. D. Sarhan, A. Matsubara, M. Sugihara,
H. Saraie, S. Ibaraki, Y. Kakino, Monitoring Method
of Cutting Force by Using Additional Spindle Sensors,
JSME International Journal, Series C 49-2 (2006) 307315.
[2] d M. S. Uddin, S. Ibaraki, A. Matsubara, S. Nishida,
Y. Kakino, Constant Engagement Tool Path Generation
to Enhance Machining Accuracy in End Milling, JSME
International Journal, Series C 49-1 (2006) 43-49.
[3] 茨木 創一，後藤 渉，松原 厚，越智 玉樹，浜村 実,
交差格子スケールの自己較正法, 精密工学会誌 72-8
(2006) 1032-1037.
[4] 茨木 創一，宜川 武史，松原 厚，垣野 義昭，中川 昌
夫，松下 哲也, Hexapod 型パラレルメカニズム工作
機械の精度向上に関する研究（第 3 報）―重力の影
響をキャンセルするキャリブレーション法―, 精密
工学会誌 72-3 (2006) 355-359.
平成 17 年度
[1] 茨木 創一，松原 厚，安田 朋広，垣野 義昭，室住 正
憲, エンドミル加工における切削抵抗の推定法（第
2 報）―固定サイクルにおける切削抵抗予測モデル
の同定とそれに基づく送り速度制御―, 精密工学会
誌 72-2 (2006) 224-228.
[2] d 室住正憲，新家秀規，藤田佳史，垣野義昭，松原
厚, エンドミル加工用知能化工程設計システムに
関する研究, 精密工学会誌 71-8 (2005) 1010-1014.
[3] S. Ibaraki, S. Suryanarayanan, M. Tomizuka, Design of
Luenberger State Observers using Fixed-structure Hinfinity Optimization and Its Application to Fault Detection in Lane-Keeping Control of Automated Vehicles, IEEE/ASME Trans. on Mechatronics 10-1 (2005)
34-42.
機械力学講座・機械機能要素工学分野
平成 18 年度
[1] 小森雅晴・村上裕映・久保愛三, 日本機械学会論文集
（Ｃ 編） 72-723 (2006) 3626-3633.
[2] d 竹岡郁・小森雅晴・久保愛三・藤尾博重・谷山重
亮・岡村太輔・伊藤雄大・高辻利之・大澤尊光, レー
ザ干渉変位計によるインボリュート形状の精密測定
法 (第 1 報)-測定装置と基礎特性評価-, 精密工学会誌
72-10 (2006) 1270-1274.
[3] 小森雅晴・村上裕映・久保愛三, 日本機械学会論文集
（Ｃ 編） 72-715 (2006) 960-968.
平成 17 年度
[1] 角昌興・久保愛三・小森雅晴・米倉将隆・江上領, ホブ
切り時の切りくずかみこみに起因する歯面むしれ, 日
本機械学会論文集（Ｃ 編） 71-707 (2005) 2399-2406.
1.2 会議論文 (国際会議)
[3]
複雑系の数理解析グループ
応用解析学講座
[4]
平成 18 年度
[1]
[2]
†∗
日野正訓, Reflecting Ornstein-Uhlenbeck processes
on path spaces, International Conference of Stochastic
Analysis and Its Application (2006).
†∗
日野正訓, Martingale djmensions for fractals, Mathematics on Fractals 2006 (2006).
平成 17 年度
[1]
[2]
[3]
[4]
[5]
[5]
[6]
†∗
H. Fujiwara, Y. Iso, Application of multipleprecision arithmetic to direct numerical computation of
inverse acoustic scattering,, The 3rd International Conference on Inverse Problems (2006).
†
藤原宏志, 科学技術計算に適した多倍長数値計算環
境の構築と数値的に不安定なスキームの直接計算の
実現, 2007 年ハイパフォーマンスコンピューティング
と計算科学シンポジウム HPCS2007 (2007) 119-126.
[1]
†m
日野正訓, On singularity of energy measures on selfsimilar sets, 2nd Conference on Analysis and Probability on Fractals (2005).
複雑系力学講座・非線形力学分野
[2]
[4]
[2]
†m
H. Tanaka, N. Tanji, Importance Sampling Method
based upon the Meyer Theorem for Stochastic Systems
driven by a generalized noise, 10th International Conference on Applications of Statistics and Probability
in Civil Engineering (2007) CD-ROM paper 掲載決定
済み.
[5]
†d
J. Ogawa, H. Tanaka, Fast Monte Carlo Simulation for Stochastic Response Analysis under Stationary
Noise Having a Specified Power Spectrum, 10th International Conference on Applications of Statistics and
Probability in Civil Engineering (2007) CD-ROM paper 掲載決定済み.
[6]
平成 17 年度
[1]
[2]
†m
Y. Hiwatari, Y. Kaneko, T. Mikami, K. Ohara,
F. Asa, Molecular dynamics - Monte Carlo hybrid simulation of thin film growth and void formation in electrodeposition process, Molecular Simulation 33-39084
(2005) 133-138.
†
Y. Kaneko, Y. Hiwatari, K. Ohara, F. Asa, Monte
Carlo simulation of damascene electrodeposition : effects of additives, Molecular Simulation 32-15 (2005)
1227-1232.
Y. Kaneko, T. Mikami, Y. Hiwatari, K. Ohara,
Computer Simulation of Electro Deposition :Hybrid of
Molecular Dynamics and Monte Carlo, Molecular Simulation 31-6 ー 7 (2005) 429-433.
†m
Y. Kaneko, Y. Hiwatari, K. Ohara, Monte Carlo
Simulation of Thin Film Growth with Defect Formation: Application to Via Filling, Molecular Simulation
30-13-15 (2005) 895-899.
†m
Y. Kaneko, Y. Hiwatari, K. Ohara, Molecular Simulation for Nanotechnologies : Application to Industry,
Molecular Simulation 30-13-15 (2005) 819-826.
†
S. Miyazaki, Gibbs measures for the network, Peerreviewed post-proceedings as Springer new series
””Studies in Computational Intelligence”” of the
Workshop on Emergent Intelligence on Networked
Agents (WEIN06) (2006).
†
S. Miyazaki, Y. Nagashima, Network as a chaotic dynamical system, The special NDES 2005 issue of International Journal of Bifurcation and Chaos (2006).
[3] T. Horita, T. Yamada, H. Fujisaka, Noisy Sine-Circle
Map as a Model of Chaotic Phase Synchronization,
Progress of Theoretical Physics Supplement: Proceedings of International Symposium on Oscillation, Chaos
and Network Dynamics in Nonlinear Science (OCNN),
no. 161 (2006) 199-203.
平成 18 年度
[1]
†m
平成 18 年度
松本浩司, Analysis of the Boundary Integral Equation Arisen from a Corrosion Problem, 8th US National
Congress on Computational Mechanics (2005).
†∗
J. Ogawa, H. Tanaka, Sensitivity analysis on model
selection in probabilistic response analysis of high-rise
buildings, Structural Safety and Reliability ( Proc. of
ICOSSAR’05) (2005) CD-ROM paper.
複雑系力学講座・複雑系数理分野
†m
松本浩司, Numerical Analysis of a non-linear
boundary value problem related with corrosion phenomena, 2005 Taiwan-Japan Joint workshop on Numerical Analysis and Scientific Computation (2005).
†d
[7]
†d
T. Kono, G. Kinoshita, H. Fujisaka, S. Uchiyama,
T. Yamada, Phase Diffusion in Chaotic Oscillators System, Progress of Theoretical Physics Supplement: Proceedings of International Symposium on Oscillation,
Chaos and Network Dynamics in Nonlinear Science
(OCNN), no. 161 (2006) 240-243.
m
S. Uchiyama, H. Fujisaka, Wandering Behavior of
the Chaotic Itinerancy in an Oscillator Neural Network
Model, Progress of Theoretical Physics Supplement:
Proceedings of International Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear Science (OCNN), no. 161 (2006) 381-384.
†m
N. Tsukamoto, H. Fujisaka, K. Ouchi, Pattern formation in Swift-Hohenberg equation under an oscillating field, Progress of Theoretical Physics Supplement:
Proceedings of International Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear Science (OCNN), no. 161 (2006) 372-375.
†
H. Tutu, T. Mitani, Controlling Symmetry Breaking
in Periodically Driven Bistable System: Preliminary
Consideration, Progress of Theoretical Physics Supplement: Proceedings of International Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear
Science (OCNN), no. 161 (2006) 376-380.
[8]
[9]
[10]
†m
N. Fujiwara, H. Tutu, H. Fujisaka, Magnetic Domain Wall Dynamics Associated with the Dynamic
Phase Transition, Progress of Theoretical Physics Supplement: Proceedings of International Symposium on
Oscillation, Chaos and Network Dynamics in Nonlinear Science (OCNN), no. 161 (2006) 181-184.
[2]
[3]
[4]
[5]
[6]
[7]
M. U. Kobayashi, T. Mizuguchi, Chaotic interfaces in
a Parametrically Forced System, Progress of Theoretical Physics Supplement: Proceedings of International
Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear Science (OCNN), no. 161 (2006)
228-231.
†
S. Miyazaki, Crossover between Ballistic and Normal
Diffusion, Progress of Theoretical Physics Supplement:
Proceedings of International Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear Science (OCNN), no. 161 (2006) 270-273.
†
E. Souda, Parameter dependence of ballistic velocity
in chaotic diffusion in the form of devil’s staircase, International Symposium on Physics of Non-Equilibrium,
Part 2: Kyoto workshop, Development of NonEquilibrium Physics in Material and Biological Sciences (2005).
複雑系構成論講座・複雑系基礎論分野
平成 18 年度
平成 17 年度
[1] K. Harada, N. Kawashima, M. Troyer, Phase Diagram
of the S=1 Bilinear Biquadratic Model, Lowtemperature Physics 24th 850 (2006) 1085-1086.
†
S. Miyazaki, Directed Network as a Chaotic Dynamical System, Post Proceedings Book of the First Internal Workshop on Agent Network Dynamics and Intelligence (ANDI2005), Springer LNAI series 4012 ””New
Frontiers in Artificial Intelligence: Proceeding of the
19th Annual Conferences of the Japanese Society for
Artificial Intelligence”” (2006) 261-270.
複雑系構成論講座・知能化システム分野
平成 18 年度
[1]
†
S. Miyazaki, Directed Network as a Chaotic Dynamical System, Progress of Theoretical Physics Supplement: Proceedings of International Symposium on Oscillation, Chaos and Network Dynamics in Nonlinear
Science (OCNN), no. 161 (2005) 103-109.
[2]
[3]
†
S. Miyazaki, Directed network as a chaotic piece-wise
linear one-dimensional map and its large-deviation
properties, Progress of Theoretical Physics Supplement: Proceedings of International Workshop on Complexity and Nonextensivity —New Trends in Statistical
Mechanics— (CN-Kyoto), no. 162 (2006) 147-154.
[4]
†
S. Miyazaki, M. Yoshida, H. Fujisaka, Parameter Dependence of Ballistic Velocity in Deterministic Diffusion in the Form of Devil ’
s Staircase, Diffusion Fundamentals I, Basic Principles of Theory, Experiment and
Application, (2005) 31.1-31.2.
†m
N. Tsukamoto, H. Fujisaka, K. Ouchi, Mechanism
of oscillating lattice structure, XXV DYNAMICS DAYS
EUROPE 2005 (2005) 46.
†m
N. Fujiwara, T.Kobayashi, H. Tutu, H. Fujisaka, Dynamic phase transition of Heisenberg system under rotating magnetic field, XXV DYNAMICS DAYS EUROPE
2005 (2005) 85.
†
H.Tutu, T.Mitani, Controlling Symmetry Breaking in
Periodically Driven Bistable System: one-dimensional
system, XXV DYNAMICS DAYS EUROPE 2005 (2005)
165.
[8] S. Uchiyama, H. Fujisaka, Transition rate and distance
between two retrieval states in the chaotic itineracy
of an oscillator neural network model: Short distance
does not necessarily push up the rate, XXV DYNAMICS
DAYS EUROPE 2005 (2005) 225.
[9]
[10]
m
平成 17 年度
[1]
NETWORKS OF OSCILLATIONS, From Basic Research to Novel Therapy (2005).
†∗
H.Fujisaka, Chaotic phase synchronization and mapping model, Workshop, COMPLEX DYNAMICS OF
[5]
[6]
†
M. Nagahara, T. Wada, Y. Yamamoto, Causal Spline
Interpolation by H-infinity Optimization, SICE-ICCAS
2006 (2006) 4160-4163.
†
J. C. Willems, Y. Yamamoto, Behaviors defined by
rational functions, 45th IEEE Conference on Decision
and Control (2006) 550-552.
†
K. Kashima, T. Yamamoto, Y. Yamamoto, Smith-type
predictor for non-minimum phase infinite-dimensional
plants and its dual structure, 45th IEEE Conference on
Decision and Control (2006) 4706-4711.
†
K. Kashima, Y. Yamamoto, H. Ozbay, Parameterization of suboptimal interpolants for the Nehari problem,
17th International Symposium on Mathematical Theory
of Network and Systems (2006) 1676-1679.
†
M. Nagahara, T. Wada, Y. Yamamoto, Design of deltasigma converters via sampled-data H-infinity optimization, 17th International Symposium on Mathematical
Theory of Network and Systems (2006) 2777-2785.
†
M. Nagahara, T. Wada, Y. Yamamoto, Design of oversampling delta-sigma DA converters via H-infinity optimization, IEEE International Conference on Acoustics, Speech, and Signal Processing III (2006) 612-615.
平成 17 年度
[1]
†
K. Kashima, Y. Yamamoto, General solution to Standard H-infinity Control Problems for a Class of Infinitedimensional Systems, Proceedings of the 44th IEEE
Conference on Decision and Control and European
Control Conference (2005).
複雑流体現象の解明とそのモデリンググルー
プ
流体理工学講座・分子流体力学分野
平成 18 年度
平成 17 年度
[10]
航空宇宙基礎工学講座・流体力学分野
平成 18 年度
[11]
平成 17 年度
航空宇宙基礎工学講座・推進工学分野
[12]
平成 18 年度
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
†m
T. Takahashi, Y. Takao, K. Eriguchi, K. Ono,
Microwave-Excited Micro Plasma Thruster, Workshop
on Micro- and Nano-Engineering for Aerospace Systems (2007) Paper P-6 (p. 15).
[13]
†m
D. Hamada, K. Nakamura, K. Eriguchi, K. Ono,
Etching of High-k Dielectric HfO2 in BCl3-Containing
Plasmas without RF Biasing, Workshop on Micro- and
Nano-Engineering for Aerospace Systems (2007) Paper
P-5 (p. 14).
†m
S. Irie, Y. Osano, M. Nori, K. Eriguchi, K. Ono,
Atomic-scale Model for Feature Profile Evolution during Chlorine- and Bromine- Containing Plasma Etching of Si, Workshop on Micro- and Nano-Engineering
for Aerospace Systems (2007) Paper P-4 (p. 13).
†m
D. Hamada, K. Osari, K. Nakamura, K. Eriguchi,
K. Ono, M. Oosawa, K. Sakoda, S. Hasaka, M. Inoue, Etching of high-k dielectric HfO2 films in
BCl3/Cl2/O2 plasmas without rf biasing, 6th International Symposium on Dry Process (2006) Paper 2-05
(pp. 11-12).
†d
K. Nakamura, K. Osari, D. Hamada, K. Eriguchi,
K. Ono, Plasma Etching of HfO2 in High-Density
Chlorine-Containing Plasmas without RF Biasing, AVS
53rd International Symposium & Exhibition (2006)
PS1-ThA2.
[1]
[2]
[3]
[4]
†
K. Eriguchi, K. Nakamura, M. Kamei, D. Hamada,
H. Fukumoto, K. Ono, A Comprehensive Characterization of the Silicon Substrate Surfaces Damaged by
Plasma Processing and the Impacts on Future Scaled
Devices, AVS 53rd International Symposium & Exhibition (2006) PS2-TuP13.
†d
H. Fukumoto, K. Ono, K. Eriguchi, Modeling of
Contact Hole Etching Profile in Two Geometrically
Different Ways, AVS 53rd International Symposium &
Exhibition (2006) PS2-TuM12.
[5]
[6]
[7]
†d
M. Mori, N. Itabashi, K. Eriguchi, K. Ono, PlasmaSurface Reaction Mechanisms for Si Etching Profiles
in UHF-ECR Cl2/O2, Cl2/O2/HBr Plamsas, AVS 53rd
International Symposium & Exhibition (2006) PS2TuM4.
K, Ono, K. Nakamura, D. Hamada, K. Osari,
K. Eriguchi, Etching of high-k HfO2 films in highdensity chlorine-containing plasmas without rf biasing,
59th Gaseous Electronics Conference Bull. Am. Phys.
Soc. Vol. 51-No. 5 (2006) 53.
†d
Y. Takao, K. Ono, K. Eriguchi, Microwave-excited
microplasma thruster: Plasma diagnostics, Performance testing, and numerical analysis, 59th Gaseous
Electronics Conference Bull. Am. Phys. Soc. Vol. 51No. 5 (2006) 40.
†d
Y. Takao, K. Ono, A Miniature Electrothermal Thruster Using Microwave-Excited Microplasmas: Fabrication and Performance Testing, CANEUS
2006 Conference on Micro-Nano-Technologies for
Aerospace Applications (2006).
†d
Y. Takao, K. Ono, Performance Testing of a
Miniature Electrothermal Thruster Using MicrowaveExcited Microplasmas, 42nd AIAA/ASME/SAE/ASEE
Joint Propulsion Conference (2006) Paper AIAA2006-4492.
平成 17 年度
S. Irie, Y. Osano, M. Mori, K. Eriguchi, K. Ono,
Profile simulation model including ion reflection on
feature surfaces during plasma etching, 6th International Symposium on Dry Process (2006) Paper 7-01
(pp. 35-36).
†m
†
[8]
†∗
K. Eriguchi, K. Takahashi, K. Ono, Plasma-induced
damage and its impacts on the reliability of advanced
semiconductor devices, 6th Internaitonal Conference
on Reactive Plasmas and 23rd Syposium on Plasma
Processing (2006) A-1A-1 (pp. 5-6).
†d
Y. Takao, K. Ono, K. Takahashi, Y. Setsuhara,
Plasma diagnostics and thrust performance analysis of
a microwave-excited microplasma thruster, 6th Internaitonal Conference on Reactive Plasmas and 23rd
Syposium on Plasma Processing (2006) P-1B-25 (pp.
329-330).
†d
Y. Osano, M. Mori, N. Itabashi, K. Takahashi,
K. Eriguchi, K. Ono, Feature profile evolution and microscopic uniformity during polysilicon gate etching
in Cl2/O2 and Cl2/O2/HBr plasmas, 6th Internaitonal
Conference on Reactive Plasmas and 23rd Syposium on
Plasma Processing (2006) G-3B-5 (pp. 101-102).
†d
K. Nakamura, K. Osari, T. Kitagawa, K. Takahashi, K. Eriguchi, K.Ono, Plasma etching of highk and metal gate materials in high-density chlorinecontaining plasmas, 6th Internaitonal Conference on
Reactive Plasmas and 23rd Syposium on Plasma Processing (2006) P-2A-34 (pp 459-460).
†
K. Takahashi, K. Ono, Carbon clustering and diamond
nucleation in fluorocarbon plasmas, International Conference on the Physics of Dusty Plasmas (ICPDP 2005)
(2005).
†∗
K. Ono, Plasma etching of high-k and metal gate materials, 8th International Symposium on Sputtering &
Plasma Processes (2005) PP2-5 (pp. 258-263).
†d
Y. Osano, T. Nakai, K. Ono, Effects of charging
and surface reactions on the profile evolution during
plasma etching of silicon, 8th International Symposium
on Sputtering & Plasma Processes (2005) PP2-2 (pp.
246-249).
†d
Y. Osano, K. Ono, A Model of Surface Reactions
and Simulation of the Feature Profile Evolution in
High-Density Plasma Etching of Si, 2005 International
Meeting for Future of Electron Devices, Kansai (2005)
P-A4 (pp. 65-66).
[9]
†m
K. Osari, T. Kitagawa, K. Nakamura, K. Takahashi,
K. Ono, Etching of High-k and Metal Gate Materials
in High-Density Chlorine-Containing Plasmas, 2005
International Meeting for Future of Electron Devices,
Kansai (2005) P-D13 (pp. 109-110).
平成 17 年度
[1]
[2]
流体理工学講座・流体物理学分野
平成 18 年度
[3]
平成 17 年度
[1]
[2]
[3]
†
H. Hanazaki, Passive scalar diffusion in stratified
sheared turbulence, Bulletin of the American Physical
Society 50-9 (2005) 294.
†
S. Goto, S. Kida, Reynolds Number dependence of
Material Line and Surface Stretching in Turbulence,
Proceedings of the Fourth Symposium on Turbulence
and Shear Flow Phenomena 1 (2005) 69-74.
[4]
†
J. Vassilicos, L. Chen, S. Goto, D. Osborne, Persistent
Stagnation Points and Turbulent Clustering of Inertial
Particles, Proceedings of the Fourth Symposium on Turbulence and Shear Flow Phenomena 1 (2005) 95-98.
流体理工学講座・環境熱流体工学分野
†d
S. Komori, K. Sugioka, The Effect of Droplets on
Mass Transfer in Wind-Driven Turbulence with Breaking Waves, 6th World Conference on Experimental
Heat Transfer, Fluid Mechanics and Thermodynamics
(2005) 420-421.
†
W. R. McGillis, K. Tanno, J. W. H. Dacey, J. D. Ware,
D. T. HO, J. T. Bent, W. E. Asher, R. Wanninkhof,
S. Komori, Measurements of the air-water CO2 flux
using atmospheric profiles, Gas Transfer at Water Surfaces (2005).
†d
K. Tanno, S. Komori, Damping Effect of Swell on
Mass Transfer across the Wind-Driven Air-Water Interface ”, The Fifth Kyoto-Seoul National-Tsinghua University Thermal Engineering Conference (2005) 107110.
†d
N. Takagaki, S. Komori, Promotion Effects Of
Falling Droplets On Carbon Dioxide Absorption
Across The Air-Water Interface, The 7th International Carbon Dioxide Conference (2005) FF-116(CDROM).
[5] Y. Ito, S. Komori, A Technique for Promoting Mass
Transfer in a Micro Channel, Second International
Symposium on Transdisciplinary Fluid Integration
TFI-2005 (2005) 36.
[6] Y. Ito, S. Komori, Gas absorption in a capillary tube,
The 4th International Workshop on Micro Chemical
Plants (2005) 69.
平成 18 年度
[1] R. Kurose, H. Watanabe, S. M. Hwang, H. Tsuji, Largeeddy simulation of swirling flows in a pulverized coal
combustion test furnace with a complex burner, In
Proc. of Whither Turbulence Prediction and Control
(WTPC)), Seoul, Korea (2006) 60-61.
[2]
d
H. Watanabe, R. Kurose, F. Akamatsu, Characteristics of flamelet in laminar spray flames, In Proc.
of Thirty-First International Symposium on Combustion, Abstracts of Work-In-Progress Posters, Heidelberg, Germany (2006) 597.
[3] F. Akamatsu, M. Nakamura, R. Kurose, Numerical
simulation on droplet group combustion behavior of
spray flat flames stabilized in a laminar counterflow, In
Proc of 10th International Congress on Liquid Atomization and Spray Systems, Kyoto, Japan (2006) CDROM.
[4] R. Kurose, N. Hashimoto, A numerical simulation of
pulverized coal combustion in a 300 kg-coal/h test furnace, In Proc. of International Conference on Clean
Coal Technology and Fuel Cells, Yokosuka, Japan
(2006) 54.
[5]
[6]
†d
R. Onishi, H. Takagi, K. Takahashi, S. Komori,
Turbulence Effects on Cloud Droplet Collisions in
Mesoscale Convective Clouds, Turbulence, Heat and
Mass Transfer 5 (2006) 709-712.
機械材料力学講座・熱材料力学分野
平成 18 年度
[1]
†
E. Shinohara, K. Tatsumi, M. Mizuno, K. Nakabe,
Phase-Averaged Mixing Characteristics of Multi-Jets
Modified by Cyclic Perturbation, Int. Sympo. on Advanced Fluid/Solid Science and Technology in Experimental Mechanics (2006) CD-ROM (No. b11-1).
[2] K. Tatsumi, Y. Tsukanaka, K. Nakabe, Development
of Passive Micro-Mixer using Channels with Obstacles and Trenches, Proc. 5th Kyoto - Seoul National Tsinghua University Thermal Engineering Conference
(2006) 115-122.
[3] K. Tatsumi, Y. Tsukanaka, K. Nakabe, Groove-Patterns
Effects on Mixing Performance in a Micro-Mixer,
Proc. 17th Int. Symposium on Transport Phenomena
(2006) CD-ROM (No. 2-B-I-1).
[4] K. Tatsumi, M. Yamaguchi, Y. Nishio, K. Nakabe,
Heat Transfer and Pressure Loss Characteristics of
Obliquely-Arranged Cut-fins, Proc. 13th Int. Heat
Transfer Conf. (2006) CD-ROM (No. THE-15).
航空宇宙基礎工学講座・流体数理学分野
†
K. Nagata, S. Komori, Y. Sakai, Linear and Nonlinear
Processes in Small-Scale Scalar Transfer in Strongly
Stable Density Stratified Flows, Proc. of the 13th International Heat Transfer Conferences (2006) CD-ROM.
平成 18 年度
平成 17 年度
[1]
†
M. Nagata, Nonlinear solutions of simple plane shear
layers with and without a system rotation, Proceedings
of IUTAM symposium on Non-Uniqueness of Solutions
to the Navier-Stokes Equations and their Connection
with Laminar-Turbulent Transition (2005).
[9]
[10]
†d
P.Xiao, Z. Li, M. Matsumoto, Molecular dynamics
simulation of in-plane thermal conductivity in singlecrystal silicon nanofilms, 1st NAREGI International
Conference, Nara (2005) 187.
†
M. Matsumoto, M. Muraoka, Absorption Dynamics
of CO2 by Electrolyte S]olution, 6 ｔｈ Liquid Matter
Conference, Utrecht, Holland (2005) 218.
物性工学講座・熱物理工学分野
平成 18 年度
[1]
[2]
[3]
[4]
†
T. Makino, H. Wakabayashi, M. Matsumoto, Experimental Verification of Kirchhoff’s Law on Thermal Radiation at an Electromagnetic Wave Level, 6th KyotoSeoul National-Tsinghua University Thermal Engineering Conference, Kyoto (2006) 1.
†d
P. Xiao, M. Matsumoto, MD Simulation of n Phonon
Dispersion and Mode-dependent Relax Time in Dielectric Crystals, 6th Kyoto-Seoul National-Tsinghua University Thermal Engineering Conference, Kyoto (2006)
61.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
平成 18 年度
[1] H. Yoshida, H. Ishibe, S. Yoshitomi, M. Saito, H. Matsui, T. Egawa, H. Iwai, H. Tsubota, T. Kuwabara,
K. Kanamaru, Hybrid Gas Bearing Effectively Stabilized by Water Evaporation from Ultra-Fine Porous
Medium, The Seventeenth International Symposium on
Transport Phenomena CD-ROM (2006) 1-D-III-3.
[2]
†
T. Makino, H. Wakabayashi, A Spectroscopic Approach for Controlling a Spectrally Functional Thermal Radiation, Internationl Heat Transfer Conference IHTC-13, Sydney, Australia (2006) ”CD-ROM,
No.RAD-11”.
†∗
M. Matsumoto, Molecular Simulation of Bubbles,
Symposium on Progress and Prospects in Molecular
Dynamics Simulation, Yokohama (2006) 19.
平成 17 年度
[1]
航空宇宙システム工学講座・熱工学分野
†
M. Matsumoto, S. Kichouchi, Molecular Dynamics
of an Oscillating Bubble, 2nd International Symposium
on Micro & Nano Technology, Hsinchu, Taiwan (2006)
314.
†d
P. Xiao, M. Matsumoto, A Molecular Dynamics
Simulation on Kapitza Thermal Boundary Resistance,
International Symposium on Molecular Simulations,
Kanazawa (2006) P21.
†
M. Matsumoto, S. Kichouchi, MD-CFD Hybrid Simulation for Bubble Dynamics, International Symposium
on Molecular Simulations, Kanazawa (2006) P14.
K. Suzuki, H. Yoshida, H. Iwai, Distributed Energy
Generation, Fuel Cell and Its Hybrid Systems, Proceedings of Advances in New and Sustainable Energy
Conversion Technologies (2006) pp. 99-113.
[3] Y. Oda, H. Yoshida, H. Iwai, M. Saito, Performance
Prediction of Micro Thermoelectric Generator Using
Rectangular-Fin Elements by Quasi 3-D Simulations
Based on Porous Medium Model, 13rd International
Heat Transfer Conference CD-ROM (2006) EQP-28.
[4] H. Iwai, T. Ishikawa, H. Yoshida, Numerical Modeling Of SOFC Based On Mixed Conductive Electrolyte,
Fourth International Conference on Fuel Cell Science, Engineering and Technology CD-ROM (2006)
FUELCELL2006-97200.
[5] K. Kumagai, H. Iwai, H. Yoshida, M. Kuno, Study
of Slug Flow inside Vertical Capillaries with Phase
Change, 4th International Conference on Nanochannels, Microchannels and Minichannels CD-ROM
(2006) ICNMM2006-96152.
平成 17 年度
[1]
†
H. Wakabayashi, T. Makino, Development of a Functional Surface for Emitting Spectrally-Selective Thermal Radiation, 5th Kyoto-Seoul National-Tsinghua
University Thermal Engineering Conference, Seoul
(2005) 31.
∗
∗
H. Yoshida, H. Iwai, THERMAL MANAGEMENT
IN SOLID OXIDE FUEL CELL SYSTEMS, 5th International Conference onEnhanced, Compact and UltraCompact Heat Exchangers: Science, Engineering and
Technology (2005) CHE2005-01.
†m
[2] H. Iwai, S. Kawakami, K. Suzuki, J. Tsujii, T. Abiko,
Performance Evaluation of Wire Spring Fin for Compact Plate-Fin Heat Exchangers, 5th International Conference onEnhanced, Compact and Ultra-Compact
Heat Exchangers: Science, Engineering and Technology CD-ROM (2005) CHE2005-21.
†m
[3] H. Iwai, H. Yoshida, Heat Exchangers in Solid Oxide
Fuel Cell Systems, Three Asian University Thermal Engineering Conference (2005) 111-116.
†m
P. Xiao, M. Matsumoto, Extracting Phonon States
and Interactions from Molecular Dynamics Simulation,
5th Kyoto-Seoul National-Tsinghua University Thermal Engineering Conference, Seoul (2005) 61.
P. Xiao, M. Matsumoto, Thermal Boundary Resistance in Nanostructure Materials, Japan-US seminar on
Nanoscale Transport Phenomena, Sendai (2005).
P.Xiao, M. Matsumoto, Z. Li, Molecular Dynamics Simulation on Phonon Scattering at Interface, 3rd
Conference of the Asian Consortium for Computational
Materials Science, Beijing, China (2005) PA18.
†∗
M. Matsumoto, Large-Scale MD Simulation of Mass
and Heat Transfer at Interfaces, 1st NAREGI International Conference, Nara (2005) 33.
[4]
m
M. Sakagami, H. Yoshida, K. Takano, W. Kitazato,
K. Kanamaru, M. Saito, H. Iwai, K. ichiro Takeishi,
BLACK HOLE AND HAWKING RADIATION IN
LAVAL NOZZLE, 6th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (2005).
[5]
m
D. Shiomi, H. Iwai, K. Suzuki, Numerical Study
on Transient Characteristics of a Tubular SOFC Cell,
Third International Conference on Fuel Cell Science, Engineering and Technology CD-ROM (2005)
FUELLCELL2005-74171.
[6] H. Yoshida, Y. Iwamoto, A. Ueda, M. Saito, PERFORMANCE EVALUATION OF THE MICRO COGENERATION SYSTEM COMPOSED OF MICROTURBINE, SOLID OXIDE FUEL CELL, AND H2O/LIBR
ABSORPTION REFRIGERATOR, International Conference on Power Engineering-05 CD-ROM (2005).
[10]
[11]
複雑構造材料の特性解析グループ
[2]
平成 18 年度
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
†d
H. Nakano, Y. Tyujo, K. Doi, A. Tachibana, Catalytic Reaction Mechanism of Hydrogen Production
in [NiFe] Hydrogenase, 20th IUBMB International
Congress of Biochemistry and Molecular Biology and
11th FAOBMB Congress (2007).
†
K. Doi, K. Nakamura, A. Tahcibana, Local-Property
Analysis for Modeling of Gate Insulator Materials, International Workshop on NANO CMOS (2006).
†d
P. Szarek, E. Dyguda-Kazimierowicz, W. A.
Sokalski, H. Nakano, A. Tachibana, Y. Cheng,
Y. Zhang, J. A. McCammon, The Catalyst-Reactants
Interactions: Physical and Chemical Outlook on
the Enzyme Active Site, 20th IUBMB International
Congress of Biochemistry and Molecular Biology and
11th FAOBMB Congress (2006).
†∗
K. Doi, H. Nakano, H. Ohta, A. Tachibana, FirstPrinciple Molecular-Dynamics Study of Hydrogen and
Aluminum Nanowires in Carbon Nanotubes, International Conference on Processing & Manufucturing of
Advanced Materials (THERMEC’ 2006) (2006).
†
K. Doi, Y. Mikazuki, S. Sugino, A. Tachibana, Local Dielectric Analysis of Gate Insulator Oxide Cluster Models, 2006 International Workshop on DIELECTRIC THIN FILMS FOR FUTURE ULSI DEVICES SCIENCE AND TECHNOLOGY (IWDTF-06) (2006).
†∗
A. Tachibana, Stress Tensor in the Standard Model
of Elementary Particles and the Origin of the Electronic
Spindle Structure of Chemical Bond, ACS Spring 2006
National Meeting & Exposition (2006).
†
K. Doi, N. Maida, K. Kimura, A. Tachibana, FirstPrinciple Study on Crystal Growth of Ga and N layers
on GaN substrate, International Workshop on Nitride
Semiconductors 2006 (IWN2006) (2006).
†d
P. Szarek, E. Dyguda-Kazimierowicz, W. A.
Sokalski, H. Nakano, A. Tachibana, Y. Cheng,
Y. Zhang, J. A. McCammon, Application of DTSS and
Rigged QED in Protein Engineering, XII-th International Congress of Quantum Chemistry (ICQC) (2006).
†d
P. Szarek, W. A. Sokalski, A. Tachibana, Intermolecular Bonding by Rigged QED and Hybrid VariationPertuurbation Conceptual Models, XII-th International
Congress of Quantum Chemistry (ICQC) (2006).
A. Tachibana, Stress Concepts in Chemistry: a Quantum Electrodynamics approach, Satelite Symposium
of XII-th International Congress of Quantum Chemistry (ICQC), Material-oriented Quantum Chemistry
(MOQC) (2006).
†∗
K. Doi, Y. Mikazuki, S. Sugino, A. Tachibana, Local
Model Analysis of Gate Insulator Oxides, The 8th International Conference on Solid-State and IntegratedCircuit Technology (ICSICT-2006) (2006).
平成 17 年度
[1]
ナノサイエンス講座・量子物性学分野
†∗
[3]
[4]
[5]
[6]
[7]
†
P. Ordon, A. Tachibana, Investigation of the Role of
the ’Chemical Force Effect’ for the Open System, 7th
Congress of the World Association of Theoretically Oriented Chemists (WATOC-05) (2005).
†
A. Tachibana, A New Energy Density Visualization
Scheme for External Field Effects on Chemical Reaction Systems, 45th Sanibel Symposium 2005 (2005).
†
K. Doi, K. Nakamura, A. Tahcibana, New Visualization Scheme of Quantum Energy Density in Chemical
Reaction Systems, PACIFICHEM2005 (2005).
†
P. Ordon, A. Tachibana, Regional Density Functional
Theory Applied to Metallic Crystal Structure, 11th International Conference on the Applications of Density
Functional Theory (DFT) in Chemistry and Physics
(2005).
†
P. Ordon, A. Tachibana, Nuclear Stiffness in Search
for Maximum Hardness Principle and for Softest States
along the Chemical Reaction Path, 11th International
Conference on the Applications of Density Functional
Theory (DFT) in Chemistry and Physics (2005).
†
A. Tachibana, Novel Interaction of Hydrogen and Aluminum Nanowires, International Hydrogen Congress
and Exhibition (IHCE-2005) (2005).
†d
H. Nakano, H. Ohta, A. Yokoe, K. Doi,
A. Tachibana, First-Principle Molecular-Dynamics
Study of Hydrogen Adsorption on an Aluminum-doped
Carbon Nanotube, 2nd International Conference on
Polymer Batteries and Fuel Cells (PBFC-2) (2005).
物性工学講座・光工学分野
平成 18 度
[1] A.Iwamae, M. A.Sakaue, R.Katai, M.Goto, S.Morita,
Plasma Polarization Spectroscopy: Polarized emission lines and anisotropic particle velocity distribution
in plasmas, Physics at EBIT and Advanced Research
Light Sources (2007) 80.
[2]
m
A.Sakaue, A.Iwamae, K.Sawada, M.Goto, S.Morita,
Polarization resolved plasma spectroscopy on LHD:
Emission location, temperature and flow of neutral hydrogen, Book of abstracts of 5th International Conference on Atomic and Molecular Data and Their Applications (2006) 114.
[3] A.Iwamae, M.Atake, A.Sakaue, M.Goto, S.Morita,
Anisotropic proton velocity distribution function in
plasmas by means of polarization measurements on
magnetic dipole transitions, Book of abstracts of 5th International Conference on Atomic and Molecular Data
and Their Applications (2006).
[4] A.Iwamae, A.Sakaue, H.Nishimura, M.Tanabe,
Y.Inubushi,
S.Fujioka,
N.Nagai,
N.Ohnishi,
K.B.Fournier, M.T.Tobin, J. F.Davis, S.B.Hansen,
S.J.Moon, F.Girard, B.Villette, M.Primout, HYDROCONFINEMENT OF A LASER-PRODUCED
UNDERDENSE PLASMA IN CYLINDRICAL
TARGETS, 12th International Workshop on Radiative
Properties of Hot Dense Matter (2006).
[5] M.Hasuo, A.Shimamoto, T.Fijiwara, Morphology
changes of CuCl thin films induced by photoirradiation, Abstracts of 7th International Conference
on Excitonic Processes in Condensed Matter (2006) 17.
[6]
m
M.Okuda, K.Deguchi, A.Iwamae, H.Nakamura,
K.Sawada, M.Hasuo, Simulation of optical near field
of a sub-wavelength gold slit array and its electric
quadrupole interaction with matter, Abstracts of 7th International Conference on Excitonic Processes in Condensed Matter (2006) 44.
[7] M.Okuda, K.Deguchi, A.Iwamae, H.Nakamura,
K.Sawada, M.Hasuo, Simulation of electric quadrupole
and magnetic dipole transition efficiencies in optical
near fields generated by a sub-wavelength slit array,
Abstracts of 9th International Conference on NearField Optics, Nanophotonics and Related Techniques
(2006) 333.
[8] K.Deguchi, M.Hasuo, Relaxation of fluorescence polarization by radiation re-absorption in a near field
regime, Abstracts of 9th International Conference on
Near-Field Optics, Nanophotonics and Related Techniques (2006) 334.
[9] T.Imagawa, T.Yoshida, T.Fujimoto, M.Hasuo, Laser
Induced Fluorescence Spectroscopy of Excited Neon
Atoms in a Liquid-nitrogen-temperature Glow Discharge Plasma under a Strong Magnetic Field, Book
of abstracts of 5th International Conference on Atomic
and Molecular Data and Their Applications (2006) 72.
平成 17 年度
物性工学講座・材料物性学分野
平成 18 年度
[1] Y. UMENO, C. ELSÄSSER, B. MEYER, P. GUMBSCH, T. SHIMADA, T. KITAMURA, Ab initio DFT
study on ferroelectricity on perovskite surfaces and in
thin-film capacitor, MMM2006 (Multiscale Materials
Modeling), Freiburg, Germany (2006).
[2]
[3]
∗
T. Kitamura, H. Hirakata, Y. Takahashi, Interface strength of low-dimensional nano-components,
Asian Pacific Conference on Fracture and Strength
(APCFS’06), Hainan Island, China (2006).
d
Y. Takahashi, H. Hirakata, T. Kitamura, O. Lourie,
T. Suzuki, In situ TEM observation of Interfacial Fracture in Nano-scale Dissimilar Body, The 16th International Microscopy Congress (IMC16), Sapporo, Japan
(2006).
[4] H. Hirakata, T. Kitamura, S. Matsumoto, Y. Takahashi,
Evaluation of Interface Toughness between Submicron
Island and Substrate, The 16th European Conference
on Fracture (ECF16), Alexandroupolis, Greece (2006).
[5]
d
A. Kushima, Y. Umeno, T. Kitamura, First Principles
Evaluation of IdealStrength of Cu nanowire, ECCM2006: III European Conference on Computational Mechanics (Lisbon, Portugal) (2006).
平成 17 年度
[1]
d
[2]
d
Y. Takahashi, H. HIRAKATA, T. KITAMURA, In
Situ Observation of Interfacial Fracture in Lowdimensional Nano Structures, 2005 International
Symposium on Electronics Materials and Packaging
(EMAP2005), Tokyo, Japan 12-11-14 (2005) 55-60.
D. V. Truong, H. HIRAKATA, T. KITAMURA, Effect of Frequency on Fatigue Crack Growth along Interface between Copper Film and Silicon Substrate,
2005 International Symposium on Electronics Materials and Packaging (EMAP2005), Tokyo, Japan 12-1114 (2005) 61-66.
[3] T. KITAMURA, H. HIRAKATA, D. V. Truong, Initiation of Interface Crack at Free Edge between Thin
Films with Weak Stress Singularity, International Conference on Fracture and Damage Mechanics IV, Mallorca, Spain 7 (2005) 205-210.
[4] Y. UMENO, M. TAGAWA, T. KITAMURA, Mechanical instability in non-uniform atomic structure,
ISPMA10 (2005.8.30-9.2, Prague, Czech Republic)
(2005).
[5] Y. UMENO, A. KUSHIMA, T. KITAMURA, Atomistic study of ideal tension of nanometer scale thin
films, EUROMAT2005 (2005.9.5-8, Prague, Czech Republic) (2005).
構造材料強度学講座
平成 18 年度
平成 17 年度
[1] S. Takagi, Y. Tokita, K. Sato, T. Shimizu,
K. Hashiguchi, K. Ogawa, K. Mimura, S. Tanimura, Stress-Strain Curves of High Strength Steel
Sheets at Strain Rates From 10-3 to 103/s Obtained
with Various Types of Tensile Testing Machines,
SAE Technical Paper Series, SAE International, 2005
(2005).
[2] K. Ogawa, H. Kobayashi, F. S. K. Horikawa, Prediction of Mechanical Behaviour of Low Carbon Steel at
High Strain Rate Using Thermal Activation Theory and
Static Data, JSME International Journal 48-4 (2005)
228-233.
[3] T. Masuda, S. Ikeda, K. Makii, S. M. K. Ogawa, Effects of Bake Hardening Property on Dynamic Tield
Strength of Ultra High Strength Sheet Steels, JSME International Journal (2005) CD-ROM.
[4]
m
M. K.Ogawa (2005).
[5] T.Nojima, K.Saito, Development of Newly Designed
Ultra-Light Core Structures (2005) CD-ROM.
ナノサイエンス講座・ナノ物性工学分野
平成 18 年度
[1]
[2]
[3]
[4]
[5]
†
M. Suzuki, K. Nagai, S. Kinoshita, K. Nakajima,
K. Kimura, T. Okano, K. Sasakawa, Morphological
Evolution of Al Whiskers Grown by High Temperature
Glancing Angle Deposition, J. Vac. Sci. & Technol. A
(2007).
†
M. Suzuki, K. Kinoshita, S. Jomori, H. Harada,
K. Nakajima, K. Kimura, Subsurface Structures in Initial Stage of FeSi2 Growth Studied by High-Resolution
Rutherford Backscattering Spectroscopy, Thin Solid
Films (2007).
[6] P. Lopez, L. Pelaz, L. M. J. Barbolla, H. Gossmann,
A. Agarwal, K. Kimura, T. Matsushita, Amorphous
layer depth dependence on implant parameters during
Si self-implantation, Materials Science and Engineering B, no. 124 (2005) 379-382.
バイオエンジニアリング講座・バイオマイクロシス
テム工学分野
平成 18 年度
平成 17 年度
†m
H. Harada, S. Jomori, M. Suzuki, K. Kinoshita,
K. Nakajima, K. Kimura, Effect of Oblique-Angle Deposition on Early Stage of Fe-Si Growth, Thin Solid
Films (2007).
†
M. Suzuki, K. Nakajima, K. Kimura, T. Fukuoka,
Y. Mori, Physically Self-assembled Au Nanorod Arrays
for SERS, 2006 MRS Fall Meeting AbstractViewer
(2006) Abstract No. E9.35.
機械材料力学講座・適応材料力学分野
平成 18 年度
[1]
†
M. Suzuki, K. Nakajima, K. Kimura, T. Fukuoka,
Y. Mori, Physically Self-assembled Au Nanorod Arrays for SERS, 20th International Conference on Raman Spectroscopy, Yokohama Abstract Book (2006)
280.
[6] H. Nohira, T. Yoshida, H. Okamoto, S. Shinagawa,
W. Sakai, K. Nakajima, M. Suzuki, K. Kimura,
N. Aun, Y. Kobayashi, S. Ohmi, H. Iwai, E. Ikenaga,
Y. Takata, K. Kobayashi, T. Hattori, Thermal stability
of Gd2O3/Si(100) interfacial transition layer, Journal
de physique IV 132 (2006) 273-277.
[2]
[3]
[4]
平成 17 年度
[1]
[2]
[3]
†
M. Suzuki, W. Maekita, YoshinoriWada, K. Nakajima,
K. Kimura, T. Fukuoka, Y. Mori, Surface Enhanced
Raman Scattering on Physically Self-Assembled Ag
Nanorod Arrays, Mater. Res. Soc. Symp. Proc. 900E
(2006) 0900-O08-03.
[5]
†
M. Suzuki, Y. Wada, W. Maekita, K. Nakajima,
K. Kimura, T. Fukuoka, Y. Mori, Physically SelfAssembled Ag Nanorod Arrays for Tunable Plasmonic
Sensors, e-J. Surf. Sci. Nanotech. 3 (2005) 280-283.
[6]
†
M. Suzuki, W. Maekita, K. Nakajima, K. Kimura,
T. Fukuoka, Y. Mori, Tunable Plasma Resonance of Ag
Nanorod Arrays Prepared by Dynamic Oblique Deposition, 2005 MRS Fall Meeting AbstractViewer (2005)
Abstract No. GG3.2.
[7]
†
T. Fukuoka, M. Suzuki, Y. Wada, K. Nakajima,
K. Kimura, Y. Mori, Surface-enhanced Raman Scattering of Rhodamine 6G Using Physically Self-assembled
Ag Nanorod Arrays, 2005 MRS Fall Meeting AbstractViewer (2005) Abstract No. Ra5.10/Rb5.10.
[8]
[5] T. Fukuoka, R. Kuramoto, N. Shinohara, S. Ikuta,
M. Suzuki, Y. Mori, Stable and Reproducible Chainlike Assembly of Gold Nanoparticles for Surfaceenhanced Raman Scattering, 2005 MRS Fall Meeting
AbstractViewer (2005) Abstract No. O12.30.
[9]
[4]
†m
Y. Shimada, T. Adachi, Y. Inoue, M. Hojo, S. Tsutsumi, Brownian Dynamics Analysis of Actin Filament
Assembly/Disassembly and Severing, The 51st Annual
Meeting of Biophysical Society, Baltimore (2007).
†
Y. Inoue, T. Adachi, A Simulation Model on Cell
Crawling Driven by Actin-Polymerization, The 51st
Annual Meeting of Biophysical Society, Baltimore
(2007).
†
T. Adachi, K. O. Okeyo, Y. Shitagawa, M. Hojo,
Strain Field Measurement of Cytoskeletal Actin Network inLamellipodia of Crawling Fish Keratocytes,
Biophysical Society of Japan, Abstract, pp. S359
(2P256) (2007).
†
T. Adachi, Computational Simulation of Cancellous
Bone Remodeling: Multiscale Biomechanics Approach
to Wolff ’s Law, The 17th International Bone Densitometry Workshop (2006) 13.
†
M. Hojo, M. Hashimoto, M. Tanaka, M. Sugano,
S. Ochiai, K. Osamura, K. Hayashi, Direct measurement of mechanical properties of DI-BSCCO filament
using Ag alloy removed tape, 19th International Symposium on Superconductivity (2006) 292.
†
S. Ochiai, M. Fujimoto, J. K. Shin, H. Okuda,
M. Hojo, T. Kuroda, H. Wada, Statistical analysis
of scatter in critical current of bent superconducting
Bi2223 composite tape, 19th International Symposium
on Superconductivity (2006) 295.
†
Y. Hirose, M. Hojo, A. Fujiyoshi, G. Matsubara, Suppression of interfacial crack for form core sandwich
panel with crack arrester, South West of England Regional Development Agency and JAXA ACE TeC Joint
2 Day Seminar on Advanced Composites for Aerospace
Applications (2006).
†
T. Adachi, Computational Modeling and Simulation
of Mechanobiology in Bone Functional Adaptation by
Remodeling, IIASA - Kyoto University, The Third Joint
International Seminar on Applied Analysis and Synthesis of Complex Systems (2006).
†
T. Adachi, Y. Osako, M. Tanaka, M. Hojo, Mechanical
Properties of Bone-Porous Scaffold Structure in Bone
Regeneration Predicted by 3D Computational Simulation, The 10th Japanese-European Symposium on Composite Materials (2006) 89-90.
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
†
T. Kusaka, H. Namiki, K. Urabe, H. Takeno, Y. Tada,
M. Hojo, W. Keiko, K. Okubo, Development of lifecontrollable-smart(LCS) concrete using recycled PET
resin blocks, Innovative developments, characterizations and applications of composites, Zhang, Y. and Ni,
Q.Q., eds (2006) 123-131.
posite tape, 4th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors
(MEM06) (2006) 33-34.
[20]
†
M. Tanaka, Y. Aonuma, T. Adachi, H. Kamioka,
T. Takano-Yamamoto, M. Hojo, Calcium Response in
Isolated Chick Osteocytes and Osteoblasts to Direct
Deformation, 5th World Congress of Biomechanics,
Journal of Biomechanics 39-1 (2006) S448.
[21]
†
T. Adachi, N. Sato, M. Tanaka, M. Hojo, Modeling and Simulation of Trabecular Surface Remodeling
Considering Morphological Characteristics of Osteocyte Network, 5th World Congress of Biomechanics,
Journal of Biomechanics 39-1 (2006) S411.
[22]
†m
K. O. Okeyo, Y. Shitagawa, T. Adachi, M. Hojo,
Quantitative Evaluation of Strain Field in the Lamella
Region of Cellular Fragments from Fish Keratocytes,
5th World Congress of Biomechanics, Journal of
Biomechanics 39-1 (2006) S244.
†
T. Adachi, Y. Kameo, M. Hojo, Multiscale Modeling
and Simulation of Trabecular Bone Remodeling Considering Interstitial Fluid Flow in Lacuno-Canalicular
System, 7th World Congress on Computational Mechanics (2006).
†∗
M. Hojo, M. Nakamura, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, Effects of Spacial
Distribution of Deffects on Bending Deformation and
Critical Current in Bi2223/Ag Superconducting Composite Tape, International Conference on Processing
and Manufacturing of Advanced Materials (2006) 246.
[1]
[2]
[3]
[4]
†∗
S. Ochiai, D. Doko, H. Okuda, S. Oh, D. Ha,
M. Tanaka, M. Hojo, K. Osamura, M. Mimura, Influence of Applied Tensile and Bending Strains on
Local and Overall Critical Current of Multifilamentary Bi2223-Composite Superconductor, International
Conference on Processing and Manufacturing of Advanced Materials (2006).
[5]
†
M. Hojo, M. Hashimoto, M. Tanaka, T. Adachi,
M. Sugano, S. Ochiai, K. Osamura, K. Hayahshi,
Nearly Direct Measurement of Mechanical Properties
of Bi2223 Filament by Removing Ag Alloy from Composite Tape, 4th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors
(MEM06) (2006) 37-38.
†
S. Ochiai, H. Rokkaku, J. K. Shin, H. Okuda, M. Hojo,
K. Osamura, A. Otto, E. J. Harley, A. Malozemoff,
Estimation of residual- and intrinsic fracture- strains
of Bi2223 filaments and analysis of stress-strain behavior of Bi2223/Ag/Ag alloy superconducting com-
K. Osamura, A. Nyilas, M. Thoener, B.Seeber,
R. Flukiger, Y. Ilyin, A. Njihuis, J.Ekin, C.Clickner,
R.P.Walsh, V. Toplosky, H.Shin, K.Katagiri, S.Ochiai,
M.Hojo, Y.Kubo, K.Miyashita, International round
robin test on mechanical property of Nb3Sn superconductive wires, 4th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors
(MEM06) (2006) 20-21.
†
M. Tanaka, Mechanosensing Behavior of Cell Network System in Bone Tissue Matrix, IIASA - Kyoto
University, The Third Joint International Seminar on
Applied Analysis and Synthesis of Complex Systems
(2006).
†∗
M. Hojo, Y. Matsushita, M. Tanaka, T. Acachi, Insitu Observation of Interfacial Crack Propagation in
GF/Epoxy Model Composite using Modified Couple
Fiber Shear and Open Methods, International Symposium on DIRECTIONS IN DAMAGE AND DURABILITY OF COMPOSITE MATERIALS (2006) 9-10.
平成 17 年度
K. Sato, T. Adachi, D. Ueda, M. Hojo, Evaluation of
Local Strain Magnitude at the Initiation Point of Calcium Signaling Response to Mechanical Stimuli in Osteoblastic Cells, 5th World Congress of Biomechanics,
Journal of Biomechanics 39-1 (2006) S239.
†
†
[6]
[7]
†
M. Tanaka, Y. Aonuma, T. Adachi, H.Kamioka,
T. Takano-Yamamoto, M. Hojo, Observation of calcium response of isolated osteocyte to localized mechanical stimulus, International Federation for Medical and Biological Engineering Proceedings, no. 12
(2005) CD-ROM.
†
Y. Hirose, M. Hojo, A. Fujiyoshi, G. Matsubara, Suppression of Interfacial Crack for Foam Core Sandwich
Panel with Crack Arrester, 9th Japan International
SAMPE Symposium (JISSE-9), (2005) CD-ROM.
†
T. Adachi, Y. Shitagawa, K. Sato, M. Hojo, Change in
Crawling Direction of Fish Keratocyte due to Substrate
Deformation, APBiomech2005 (2005).
†
M. Hojo, T. Matsuoka, M. Hashimoto, M. Tanaka,
M. Sugano, S. Ochiai, K. Miyashita, Direct Measurement of Elastic Modulus of Nb3Sn Using Extracted
Filaments from Superconducting Composite Wire and
Resin Impregnation Method, 18th International Symposium on Superconductivity (2005) 291.
†
S. Ochiai, D. Doko, H. Rokkaku, M. Fujimoto,
H. Okuda, M. M. Hojo, M. Tanaka, M. Sugano, K. Osamura, M. Miura, Variation of Local Critical Current
and Its Influence on Overall Current on Bent Multifilamentary Bi2223/Ag Tape, 18th International Symposium on Superconductivity (2005) 279.
†
K. Sato, T. Adachi, M. Hojo, Y. Tomita, Release
of intracellular tension induces the rapid disassembly
of actin stress fibers in osteoblastic cells, Proceedings
of the Second Japan-Switzerland Workshop on Biomechanics (2005) 80.
†
S. Ochiai, S. Iwamoto, T. Tomida, T. Nakamura,
H. Okuda, M. Tanaka, M. Hojo, Cracking and Spalling
of Coating Layer of Galvannealed Steel, International
Conference on Interfaces and Interphases in Multicomponent Materials (IMM05) (2005) 69-70.
[8]
[9]
[10]
[11]
[12]
[13]
[14]
†
T. Hobbiebrunken, T. Omori, M. Hojo, T. Adachi,
B. Fiedler, Investigation of Microscopic Failure Initiation in CF/Epoxies using Multi-Scale FEA and In-Situ
Experiments, The Tenth Composites Durability Workshop, Bellevue-Eastgate (2005).
†
T. Adachi, Y. Osako, M. Tanaka, M. Hojo, Computational simulation of trabecular surface remodeling
considering osteocyte network as a mechanosensory
system, Proceedings of the Second Japan-Switzerland
Workshop on Biomechanics (2005) 38.
†
S. Ochiai, T. Ishida, D. Doko, K. Morishita, H. Okuda,
S. S. Oh, D. Ha, M. Hojo, M. Tanaka, M. Sugano,
K. Osamura, A Monte Carlo - shear lag simulation of
tensile fracture behavior of Bi2223 filament, 3rd Workshop on Electro-Magnetic Property of Composite Superconductors (MEM05) (2005) 40.
†
T. Kusaka., M. Hojo, T. Fukuoka, M. Ishibashi, Effect
of Strain Rate on the Interlaminar Fracture Toughness
of Zanchor Reinforced Composites, The JSME/ASME
International Conference on Materials and Processing
2005 (M&P 2005) (2005) IMP-12-1-5.
†
T. Adachi, K. Sato, M. Hojo, Y. Tomita, Analysis of
local strain inducing calcium signaling response to mechanical stimulus in a single osteoblastic cell, Special
Issue: Abstracts of the 12th International Congress of
Biorheology and 5th International Conference on Clinical Hemorheology (2005) 70.
†
T. Adachi, K. Sato, Local Disassembly of Actin Stress
Fibers Induced by Selected Release of Tension in Osteoblastic Cell, The 6th Asian-Pacific Conference on
Medical and Biological Engineering (2005).
[4]
[5]
[6]
[7]
[8]
[9]
†
S. Ochiai, Y. Sakai, K. Sato, T. Ueda, K. Morishita,
H. Okuda, M. M. T. Hojo, Y. Waku, N. Nakagawa,
S. Sakata, A. Mitani, T. Takahashi, Temperature- and
Displacement Speed- Dependence of notched strength
at 1873-2023K of Alumina/YAG Composite, 11th International Conference on Fracture (2005) ”1-6, CDROM”.
[10]
[11]
機械材料力学講座・固体力学分野
[12]
平成 18 年度
[1]
[2]
[3]
†∗
N.
MIYAZAKI,
R.
MATSUMOTO,
K. NISHIMURA, S. MATSUMOTO, Applications of Molecular Dynamics Method to Strength
of Materials (Toward Studying Hydrogen Effects),
International Hydrogen Energy Development Forum
(2007) 125-135.
[13]
†∗
R. MATSUMOTO, N. MIYAZAKI, M. NAKAGAKI, Influences of Nano-sized Crystalline Particles
on the Mechanical Properties of Metallic Glass - A
Molecular Dynamics Study, International Conference
on Computational & Experimental Engineering and
Science (ICCES ユ 07) (2007) 1699-1705.
[14]
†d∗
S. TAKASHIMA, N. MIYAZAKI, T. IKEDA,
M. NAKAGAKI, Elastic-plastic Constitutive Equation
Taking Account of Particle Size, International Conference on Computational & Experimental Engineering
and Science (ICCES ユ 07) (2007) 1671-1677.
[15]
†m
H. OGINO, N. MIYAZAKI, T. MABUCHI,
T. NAWATA, Birefringence Simulation of Annealed Ingot of Calcium Fluoride Single Crystal, EMAP2006,
8th International Conference on Electronic Materials
and Packaging (2006) 298-303.
†m
M. HAMADA, T. IKEDA, N. MIYAZAKI,
H. TANAKA, T. NUMATA, Reliability of Stacked
Ball Grid Array Packages during the Solder Reflow
Process, EMAP2006, 8th International Conference on
Electronic Materials and Packaging (2006) 190-195.
†
R. MATSUMOTO, N. MIYAZAKI, Deformation
Mechanism and Mechanical Properties of Metallic
Glass with Dispersed Nanocrystalline Particles Studied
by Molecular Dynamics Simulations, The 5th International Conference on Bulk Metallic Glasses (BMG V2006) (2006).
†
T. Ikeda, N. Shishido, N. Miyazaki, Strain Measurement in Electronic Packages using the Digital Image
Correlation Method, MAP2006, The 6th International
Workshop on Microelectronics Assembling and Packaging (2006).
†m
Y. KUBOTA, R. MATSUMOTO, M. NAKAGAKI,
Molecular Dynamics Analysis on Crack Growth Behavior in Single and Noano-crystalline Fe, AEPA 2006,
The 8th Asia-Pacific Symposium on Engineering Plasticity and its Application (2006).
†
R. MATSUMOTO, T. HAYASHIDA, M. NAKAGAKI, Molecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement of -Fe by Equal Channel Angular Pressing, AEPA
2006, The 8th Asia-Pacific Symposium on Engineering
Plasticity and its Application (2006).
†d
S. TAKASHIMA, N. MIYAZAKI, T. IKEDA,
M. NAKAGAKI, Elastic-Plastic Constitutive Equation
accounting for Microstructure, AEPA 2006, The 8th
Asia-Pacific Symposium on Engineering Plasticity and
its Application (2006).
†∗
N. MIYAZAKI, Dislocation Density Evaluation Using Dislocation Kinetics Model, 5th International
Workshop on Modeling in Crystal Growth (2006).
†
M. KOGANEMARU, T. IKEDA, N. MIYAZAKI,
H. TOMOKAGE, Evaluation of Stress-Induced Effects in Electronic Characteristics of nMOSFETs, 2006
Electronics Systemintegration Technology Conference
(2006) 1174-1181.
†∗
N. MIYAZAKI, T. IKEDA, Application of Computational Mechanics to Reliability Studies of Electronic
Packaging, The 10th International Conference on Enhancement and Promotion of Computational Methods
in Engineering and Science (EPMESC X), (2006) 88100.
†∗
T. IKEDA, M. NAGAI, N. MIYAZAKI, Interfacial
Fracture Mechanics for a Crack between Dissimilar
Media, 7th World Congress on Computational Mechanics (WCCM VII) (2006).
†
R. MATSUMOTO, T. HAYASHIDA, M. NAKAGAKI, N. MIYAZAKI, Molecular Dynamics Analysis on Microstructural Evolution during Equal Channel Angular Pressing (Study on Processing Route, Die-
Angle and Initial Texture Effects), 7th World Congress
on Computational Mechanics (WCCM VII) (2006).
[16]
[17]
[2]
†
T. IKEDA, N. MIYAZAKI, Reliability of Interfaces
between Components in Advanced Electronic Packages
Under Solder Reflow Process, 16th European Conference of Fracture (2006) Paper 416.
[3]
†d
M. NAGAI, T. IKEDA, N. MIYAZAKI, ThreeDimensional Thermal Stress Intensity Factors Analyses of Interface Cracks, 16th European Conference of
Fracture (2006) Paper 418.
[4]
平成 17 年度
[1]
[2]
[3]
[4]
[5]
[6]
[7]
†m
N. SHISHIDO, T. IKEDA, N. MIYAZAKI, Strain
Measurement in the Microstructure of Advanced Electronic Packages Using Digital Image Correlation, Proceedings EMAP 2005, 2005 International Symposium
on Electronics Materials and Packaging (2005) 83-87.
[5]
†
T. IKEDA, W. K. KIM, N. MIYAZAKI, Reliability of
a Flip-Chip Using Adhesive Interconnection under Solder Reflow Process, ICCES ’05, International Conferenece on Computational & Experimental Engineering
and Sciences (2005) 2384-2389.
†
M. NAKAGAKI, S. TAKASHIMA, R. MATSUMOTO, N. MIYAZAKI, Grain Size Dependent
Plasticity Modelling for Super Plastic Metal, ICCES ’
05, International Conferenece on Computational
& Experimental Engineering and Sciences (2005)
388-393.
†
T. IKEDA, W. K. KIM, N. MIYAZAKI, Predicting Technique of Delamination at Adhesively Bonding Joints in an Flip Chip Packge during Solder Reflow Process, 2005 InterPACK Conference (2005) Paper IPACK2005-73153.
†d
M. KOGANEMARU, T. IKEDA, N. MIYAZAKI,
Experimental and Numerical Evaluation of Residual
Stress in IC Chips, 2005 InterPACK Conference (2005)
Paper IPACK2005-73110.
†
M. NAKAGAKI, S. TAKASHIMA, R. MATSUMOTO, N. MIYAZAKI, Study on an Aspect of
Hall-Petch Effect in Metallograin Structure, International Workshop on Development and Advancement of
Computational Mechanics (2005) 50-62.
ナノシステム創成工学講座・ナノメトリックス工学
分野
I. Kanno, T. Kunisawa, H. Kotera, Piezoelectric Deformable MEMS Mirror for Adaptive Optics Composed of PZT Thin Films, Optical MEMS 2006 (2006)
156.
†
T. Suzuki, H. Hata, H. Shintaku, I. Kanno, S. Kawano,
H. Kotera, Fast Pulsatile Flow Included in Net Continuous Flow Generated by a Traveling Wave Micropump,
Micro Total Analysis Systems 2006 (2006) 131.
†
H. Shintaku, Y. Hirabayashi, T. Suzuki, I. Kanno,
H. Kotera, A Low Temperature Bonding Technique for
Microfluidic Chip Fabrication Using Soft-Cure SU-8
Sheet, Micro Total Analysis Systems 2006 (2006) 681.
†
T. Suzuki, H. Yamamoto, M. Ohoka, A. Okonogi,
H. Kabata, I. Kanno, M. Washizu, H. Kotera, High
Throughput Electroporation Microchip Fabricated by
Single-Mask Inclined UV Lithography, Micro Total
Analysis Systems 2006 (2006) 1498.
平成 17 年度
[1]
†∗
N. MIYAZAKI, The State of Art for Mechanical
Strength Study of Single Crystal for Electronic/Optical
Devices, ICCES ’05, International Conferenece on
Computational & Experimental Engineering and Sciences (2005) 395-400.
†
[2]
†
I. Kanno, T. Suzuki, H. Endo, H. Kotera, DEVELOPMENT OF PIEZOELECTRIC RF-MEMS SWITCH
DRIVEN BY LOW OPERATING VOLTAGE, Proceedings of IPACK2005 ASME InterPACK ’05 (2005)
73099.
†
I. Kanno, H. Endo, T. Suzuki, H. Kotera, Piezoelectric micro-actuators for RF-MEMS switches, IQEC and
CLEO-PR 2005 (2005) 1380-1381.
[3] J. Loverich, I. Kanno, H. Kotera, A NOVEL HIGH ENERGY DENSITY DIELECTRIC ELASTOMER ACTUATOR FOR MICRO ANAYSIS SYSTEMS, Micro
Total Analysis Systems 2005 (2005) 160-162.
[4] J. Loverich, I. Kanno, H. Kotera, A NEW AUTONOMOUS IMPLANTABLE MICRO POWER
SUPPLY USING BONE STRAIN-BASED PIEZOELECTRIC ENERGY HARVESTING, Micro Total
Analysis Systems 2005 (2005) 433-435.
[5] H. Shintaku, S. Kawano, T. Suzuki, I. Kann1,
H. Kotera, DIELECROPHORETIC ELECTRODE
ARRAY FOR OPTIMUM CELL FLOW IN PRESSURE DRIVEN FLOW, Micro Total Analysis Systems
2005 (2005) 1075-1077.
[6] T. Suzuki, H. Hata, H. Shintaku, I. Kanno, S. Kawano,
H. Kotera, VISUALIZATION AND OPTIMIZATION
FOR FLUID FLOW OF TRAVELING WAVE MICROPUMP, Micro Total Analysis Systems 2005 (2005)
1108-1110.
[7] T. Suzuki, T. Tokuda, N. Fujiwara, H. Yamamoto,
I. Kanno, M. Washizu, H. Kotera, SINGLE-MASK
FABRICATION PROCESS FOR HIGH ASPECTRATIO EMBEDDED MICROCHANNELS WITH
OPENINGS, Micro Total Analysis Systems 2005
(2005) 1183-1185.
平成 18 年度
[1]
†
T. Suzuki, T. Tokuda, H. Yamamoto, M. Ohoka,
I. Kanno, M. Washizu, H. Kotera, Rapid Fabrication
Process for High Aspect-Ratio Embedded Microchannels with Orifices Usinga Single SU-8 Layer On a
mask, MEMS 2006 (2006) 346 - 349.
ナノシステム創成工学講座・ナノ・マイクロシステ
ム工学分野
平成 18 年度
[1]
[2]
m
T. Ozaki, K. Sugano, T. Tsuchiya, O. Tabata, Versatile Method of Sub-Micro Particle Pattern Formation
Using Self-Assembly and Two-Step Transfer, The 20th
IEEE International Conference on Micro Electro Mechanical Systems (2007) pp.353-356.
H. Yagyu, O. Tabata, MICRO-POWDER BLASTING SIMULATION WITH MASK EROSION USING
CELLULAR AUTOMATON, The 20th IEEE International Conference on Micro Electro Mechanical Systems (2007) pp.215-218.
m
[4]
m
[6]
K. Miyamoto, T. Jomori, K. Sugano, O. Tabata,
T. Tsuchiya, MECHANICAL CALIBRATION OF
MEMS SPRING WITH 0.1-µN FORCE RESOLUTION, The 20th IEEE International Conference on Micro Electro Mechanical Systems (2007) pp.227-230.
Y. Yamaji, K. Sugano, O. Tabata, T. Tsuchiya,
TENSILE-MODE FATIGUE TESTS AND FATIGUE
LIFE PREDICTIONS OF SINGLE CRYSTAL SILICON IN HUMIDITY CONTROLLED ENVIRONMENTS, The 20th IEEE International Conference on
Micro Electro Mechanical Systems (2007) pp.267-270.
Y. Higuchi, K. Sugano, T. Tsuchiya, O. Tabata, Temperature Controlled Capillary Driven Sequential Stacking Self-Assembly using Two Different Adhesives, 6th
International IEEE Conference on Polymer and Adhesives in Microelectronics and Photonics (2007).
O. Tabata, Role of University Research for Open Innovations in MNT, The 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2007) (2007).
[9] K. SUGANO, W. SUN, TOSHIYUKI, Tsuchiya,
O. Tabata, Design and Analysis of Soft X-ray Source
Using Resonance Transition Radiation for Tabletop
Synchrotron, Asia-Pacific Conference of Transducers
and Micro-Nano Technology, (2006) pp. 109.
m
Y. Yamaji, K. Sugano, O. Tabata, Toshiyuki,
Tsuchiya, Tensile and Tensile-mode Fatigue Test of
Single Crystal Silicon in Various Environments, AsiaPacific Conference of Transducers and Micro-Nano
Technology (2006) pp. 230.
[11] T. Tsuchiya, MEMS Reliability, The 20th International
Conference on Microelectronic (2006).
∗
T. Tsuchiya, Humidity effect on tensile strength
and fatigue properties of single crystal silicon microstructures, Korea-Japan-China MEMS Standardization Workshop 2006 (2006) pp.105-116.
平成 17 年度
[1]
[4]
[5]
[6]
∗
[8] T. Tsuchiya, Y. Yamaji, K. Sugano, O. Tabata, Tensile
mode fatigue test of silicon thin films using electrostatic
grip system, The 9th International Fatigue Congress
(2006) pp. O47.
[12]
[3]
m
[7] K. Sugano, W. Sun, T. Tsuchiya, O. Tabata, Design
and Analysis of Resonance Transition Radiation Xray Source for Tabletop Synchrotron, Symposium on
Portable Synchrotron Light Sources and Advanced Applications (2007).
[10]
[2]
d
[3]
[5]
BUTTON, The 19th IEEE International Conference on
Micro Electro Mechanical Systems (2006) pp.734-737.
†m
W. Yoshikawa, A. Sasabe, K. Sugano, T. Tsuchiya,
O. Tabata, A. Ishida, VERTICALDRIVEMICROACTUATOR USINGSMATHIN FILM FOR A SMART
[7]
[8]
[9]
†
K. Sugano, H. Yamada, O. Ichihashi, T. Tsuchiya,
O. Tabata, FABRICATION OF GOLD NANOPARTICLE USING PULSED MIXING METHOD WITH
VALVELESS MICROPUMPS, The 19th IEEE International Conference on Micro Electro Mechanical Systems (2006) pp.546-549.
†m
N. Matsuzuka, Y. Hirai, O. Tabata, PREDICTION
METHOD OF 3-D SHAPE FABRICATED BY DOUBLE EXPOSURE TECHNIQUE IN DEEP X-RAY
LITHOGRAPHY (D2XRL), The 19th IEEE International Conference on Micro Electro Mechanical Systems (2006) pp.186-189.
†∗
O. Tabata, Computational Three-Dimensional Process Design for MEMS (Invited Plenary Talk), International Conference on MEMS and Semiconductor Nanotechnology (2005).
†∗
O. Tabata, Computational 3-D Microfabrication for
MEMS and MEMS Research activities at Micro-Nano
System Lab. (Invited Plenary Talk), Tamkang University 2005 International Nano and MEMES Workshop
(2005) pp.1-8.
†∗
O. Tabata, Computational MEMS Process Design
and Process Development (Invited), 2005 International Conference on Solid State Devices and Materials
(2005) pp. 70-71.
†∗
O. Tabata, Computational MEMS Process Design
and Process Development, IIASA – Technische Universität München – Kyoto University, The Second Joint International Seminar on Applied Analysis and Synthesis
of Complex Systems (2005).
†m
N. Matsuzuka, Y. Hirai, O. Tabata, A New Experimental Technique for Process Parameters Determination on X-ray Lighography, High Aspect Micro Structure Technology (2005) pp.146-147.
†m
Y. Hirai, N. Matsuzuka, O. Tabata, Analytical
Method for Process Parameters Determination on Double Exposure Deep X-Ray Lithography, High Aspect
Micro Structure Technology (2005) pp.144-145.
[10] T. Kakinaga, A. Hatai, Y. Isono, O. Tabata, Silicon Anisotropic Wet Etching Simulation using Molecular Dynamics, The 13th International Conference
on Solid-State Sensors Actuators and Microsystems
(Transducers’05) (2005) pp.816-819.
[11] S. Wakida, H. Ishii, N. Naruishi, T. Miyado,
M. Kurokawa, , S. Shimotsuma, T. Demura, O. Tabata,
Multichannel Microfluidic Chip Based on Capillary
Electrophoresis Using Industrial LIGA Plastic Replica
Process, Biosensors & Biomaterials Workshop 2005
(2005).
[12] M. Sugimoto, K. Minai, Y. Fujii, M. Uemura,
S. Nishio, O. Tabata, A Novel Micro Counter-StreamMode Oscillating-Flow (COSMOS) Heat-Pipe, The
18th IEEE International Conference on Micro Electro
Mechanical Systems (2005) 606-609.
[13]
†
T. Tsuchiya, Mechanical Reliability of Integrated Microsystems, 2005 Micro Alliance Meeting (2005).
[14]
[15]
†
T. Kimura, H. Nakanishi, Y. Horiguchi, S. Tadokoro,
K. Ohno, Guidelines for Human Interface Design of
Rescue Robots, SICE-ICASE International Joint Conference 2006 (2006) 3455–3460.
T. Tsuchiya, Mechanical Testing of Integrated Microsystems, FIS conference on future integrated systems (2005) pp. 57-58.
†
T. Tsuchiya, Tensile testing of MEMS materials
（招待講演）, Tech. Digest of the 13th International Conference of Solid-State Sensors and Actuators
(Transduces ’05) (2005) pp. 1953-1956.
[4]
d
E. V. Poorten, Y. Yokokohji, Rendering a Rigid Virtual World through an ImpulsiveHaptic Interface, International Conference on Intelligent Robots and Systems
(IROS 2006) (2006) 1547–1552.
平成 17 年度
マイクロシステム創成講座・マイクロ加工システム
分野
平成 18 年度
平成 17 年度
[1]
[2]
†m
F. Tsumori, K. Hayakawa, S. Shima, Simulation of
Powder Behavior Based on Discrete Model Taking Account of Surface Effect of Particles, Int. Conf. Computational Plasticity Fundamentals and Applications
(2005) 591.
[5]
[2] M. Kurisu, Y. Yokokohji, Y. Oosato, Development of
a Laser Range Finder for 3D Map-Building in Rubble -The Second Report: Development of the 2nd
Prototype-, Proc. IEEE International Conference on
Mechatronics and Automation (2005) 1842-1847.
†
F. Tsumori, S. Shima, imulation of Column Structure
Growth of Magnetic Powder in Applied Magnetic Field
by Coupled FEM-DEM Modeling, Intelligent Processing and Manufacturing of Materials (2005).
[3] F. Tsumori, H. Ogawa, S. Shima, On-demand Droplet
Spotter for Formation of Micropattern Using Electrostatic Force, Powder Metallurgy & Particulate Materials, no. 9 (2005) 96-107.
[4]
[1] K. Hayashi, Y. Yokokohji, T. Yoshikawa, TeleExsistence Vision System with Image Stabilization for
Rescue Robots, Proc. IEEE International Conference
on Robotics and Automation (2005) 50-55.
機械システム創成学講座
平成 18 年度
[1]
†
F. Tsumori, M. Hirata, S. Shima, Column Structure
Growth Simulation of Magnetic Particles by Distinct
Element Method Coupled with Magneto-FEM, Powder
Metallurgy & Particulate Materials, no. 1 (2005) 7484.
[2]
†
F. Tsumori, S. Shima, Isostatic Powder Compaction
Process with Bingham Semi-solid/fluid Mold Material, Powder Metallurgy & Particulate Materials, no. 3
(2005) 157-169.
複雑系の制御・設計論グループ
[5]
平成 18 年度
[1]
[2]
†m
K. Shigeta, Y. Sato, Y. Yokokohji, Motion Planning
of Encountered-type Haptic Device for Multiple Fingertips Based on Minimum Distance Point Information,
The 2nd Joint EuroHaptics Conference and Symposium
on Haptic Interfaces for Virtual Environment and Teleoperator Systems (2007).
d
E. V. Poorten, Y. Yokokohji, Impulse-based Control
of an Impulsive Haptic Interface, The 2nd Joint EuroHaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (2007).
[3] Y. Yokokohji, T. Tsubouchi, A. Tanaka, T. Yoshida,
E. Koyanagi, F. Matsuno, S. Hirose, H. Kuwahara, F. Takemura, T. Ino, K. Takita, N. Shiroma,
T. Kamegawa, Y. Hada, K. Osuka, T. Watasue,
T. Sawaragi, Y. Horiguchi, Human-Robot Collaboration: Technical Issues from a Viewpoint of HumanCentered Automation, Proc. of International Symposium on Automation and Robotics in Construction 2006
(2006) CD-ROM.
†
T. Sawaragi, Y. Horiguchi, Y. Kuroda, Editing and
Distributing Human Skills within community via Fragmentary Annotations on Image Data, Preprints of the
8th IFAC Symposium on Automated Systems Based on
Human Skill and Knowledge (2006) CD-ROM.
[3] H. Wada, A. Nakajima, T. Sawaragi, Y. Horiguchi, A
Teaching System Fostering Expertise for the Tuning
of Printed Circuit Board Inspection Systems, Proc. of
IECON06 (2006) PF-004251.
[4]
機械力学講座・メカトロニクス分野
†
†
T. Sawaragi, Y. Horiguchi, A. Hina, Safety Analysis
of Systemic Accidents Triggered by Performance Deviation, Proc. of SICE-ICASE International Joint Conference 2006 (2006) 1778-1781.
†
Y. Horiguchi, R. Fukuju, T. Sawaragi, An Estimation Method of Possible Mode Confusion in Human
Work with Automated Control Systems, Proc. of SICEICASE International Joint Conference 2006 (2006)
943-948.
[6] Y. Yokokohji, T. Tsubouchi, A. Tanaka, T. Yoshida,
E. Koyanagi, F. Matsuno, S. Hirose, H. Kuwahara, F. Takemura, T. Ino, K. Takita, N. Shiroma,
T. Kamegawa, Y. Hada, K. Osuka, T. Watasue,
T. Kimura, H. Nakanishi, Y. Horiguchi, S. Tadokoro,
K. Ohno, Guidelines for Human Interface Design for
Rescue Robots, Proc. of SICE-ICASE International
Joint Conference 2006 (2006) 3455-3460.
[7]
†d
Y. Liu, Y. Tian, T. Sawaragi, A Heuristic Algorithm
Based on DBR and MAS for Solving Container Loading Problem, Proc. of 2006 IEEE International Conference on Service Operations and Logistics, and Informatics (2006) 476-481.
[8]
[9]
†
T. Taniguchi, T. Sawaragi, Incremental Acquisition of
Compositional Schemata based on Behavioral Learning, Proceedings of 6th International Workshop on Epigenetic Robotics (2006) 187.
[9]
†
T. Taniguchi, T. Sawaragi, Symbol emergence by
combining a reinforcement learning schema model
with asymmetric synaptic plasticity, Proc. in 5th International Conference on Development and Learning
(2006) CD-ROM.
[10] Y. Yokokohji, H. N. et al., Guidelines for Human Interface Design of Rescue Robots, Proceedings of SICE
- ICASE International Joint Conference 2006 (2006)
3455-3460.
[10]
[11]
[12]
[11] M. Onosato, H. N. et al., Aerial Robots for Quick Information Gathering in USAR, Proceedings of SICE
- ICASE International Joint Conference 2006 (2006)
3435-3438.
[12]
†
H. Nakanishi, K. Inoue, Order Formation in Learning
Nonlinear Robust Control Systems by Use of Neural
Networks, Proceedings of IEEE International Conference on Neural Networks 2006 (2006) CD-ROM.
平成 17 年度
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
†
[1]
[2]
[3]
∗
[4]
†m∗
T. Taniguchi, T. Sawaragi, Adaptive Organization
of Generalized Behavioral Concepts for Autonomous
Robots: Schema-Based Modular Reinforcement Learning, Proc. of IEEE CIRA (2005) CD-ROM.
†∗
Y. Tian, T. Sawaragi, K. Shimohara, J. Ren, Improving the Conflicts on Multiple Goals and Constraints
Based TZBM, Proc. of the SICE Annual Conference
2005 (2005) 3260-3265.
†m
Y. Liu, T. Sawaragi, Y. Tian, Learning Generalized
Tacit Knowledge by Explaining Expert’s Performance
of Load Allocation Process, Proc. of the SICE Annual
Conference 2005 (2005) 3248-3253.
†∗
T. Sawaragi, Y. Horiguchi, A. Hina, Analytical Approach to Correct and Succinct Interface Design for
Safety-Monitoring in Cockpit, Proc. of the HCI International 2005 Conference (2005) CD-ROM.
†
H. Nakanishi, K. Inoue, A Study on Intelligent Aerorobot for Disaster Response, Advances in Safety and
Relia- bility (Proc. ESREL 2005) 4 (2005) 1730-1734.
†
Yoshimura, M., Yoshimura, Yu, Izui, K., Nishiwaki, S., Product Optimization Incorporating Discrete
Design Variables Based On Decomposition Of Performance Characteristics, Proceedings of the 2006
ASME International Design Engineering Technical
Conferences & Computers in Engineering Conference
DETC2006-99187 (2006).
†
M. Kobayashi, S. Nishiwaki, K. Izui, H. Yamakawa,
M. Yoshimura, A Two-stage Design Method for Compliant Mechanisms Having Specified Non-linear Output, Proceedings of the 2006 ASME International Design Engineering Technical Conferences & Computers
in Engineering Conference DETC2006-99351 (2006).
†
M. Nakamura, K. Izui, S. Nishiwaki, M. Yoshimura,
Multi-objective Particle Swarm Optimization Incorporating Design Sensitivity, Proceedings of the 11th
AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference AIAA2006-7010 (2006).
†
K. Mogami, S. Nishiwaki, K. Izui, M. Yoshimura,
T. Nomura, Structural Optimization for the Design of
Band-Gap Structures Using Discrete Structural Elements, Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference AIAA
2006-7010 (2006).
平成 17 年度
[1]
†∗
Y. Tian, Y. Liu, N. Sannomiya, K. Shimohara,
Three-zone Buffer Management and Its Applications to
Equalizing Operations Problems, Proc. of International
Manufacturing & Logistics Systems Technical Session
III-1 (2005) pp.1-6.
T. Sawaragi, Dynamical and Complex Behaviors in
Human-Machine Co-Adaptive Systems, Preprints of
the 16th IFAC World Congress (2005) CD-ROM.
平成 18 年度
†d
M. Onosato, H. Nakanishi, et al., Information Acquisition from the Sky (Aero-robots), 大都市大震災軽減
化プロジェクト第 4 回シンポジウム論文集 (2006)
99-120.
†
分野
†
T. Taniguchi, T. Sawaragi, Incremental acquisition of
behavioral concepts through social interactions with a
caregiver, Proc. of the 11th International Symposium
on Artificial Life and Robotics (AROB’06) (2006).
T. Sawaragi, Y. Liu, Y. Tian, Human-Machine
Collaborative Knowledge Creation: Capturing Tacit
Knowledge by Observing Expert’s Demonstration of
Load Allocation, Proc. of CSM/KSS 2005 (2005) on the
web.
航空宇宙システム工学講座・最適システム設計工学
Y. Horiguchi, T. Sawaragi, Effects of Shared Communicational Modality to Joint Activity of Human Operator and Robot Autonomy, Proc. of the 9th International
Conference on Intelligent Autonomous Systems (IAS-9)
(2006) 903-912.
Y. Horiguchi, S. Tsukamoto, H. Ono, T. Sawaragi,
M. Sato, Effects of Robotic Arm Orthosis Behaviors to
User’s Motion Structure, Proc. of the 9th International
Conference on Intelligent Autonomous Systems (IAS-9)
(2006) 883-890.
†∗
[2]
†
K. Izui, S. Nishiwaki, M. Yoshimura, Y. Yamashita,
A Product Family Design Optimization Method Considering Hierarchical Modularity, Proceedings of the
IJCC Workshop 2006 on Digital Engineering (2006)
101-106.
†
K. Mogami, K. Izui, S. Nishiwaki, M. Yoshimura,
N. Kogiso, Reliability-Based Topology Optimization
Considering Multicriteria Using Frame Elements, Proceedings of IDETC/CIE 2005: ASME 2005 International Design Engineering Technical Conferences &
Computers and Ingormation in Engineering Conference DETC2005-85137 (2005).
[3]
[4]
[5]
[6]
[7]
[8]
†
A. Takezawa, S. Nishiwaki, K. Izui, M. Yoshimura,
Structural Topology Optimization Using Frame Elements Based on the Complementary Strain Energy
Concept for Eigen-Frequency Maximization, Proceedings of IDETC/CIE 2005: ASME 2005 International
Design Engineering Technical Conferences & Computers and Ingormation in Engineering Conference
DETC2005-85176 (2005).
†
M. Yoshimura, T. Nishimura, K. Izui, Acquisition of
Product Design Guidelines Considering User Kansei
Data Pertaining to Product Environments, Proceedings
of IDETC/CIE 2005: ASME 2005 International Design
Engineering Technical Conferences & Computers and
Ingormation in Engineering Conference DETC200585160 (2005).
†
V. nron, K. Lewis, Y. Murase, K. Izui, S. Nishiwaki,
M. Yoshimura, Handling Multiple Objectives in Decentralized Design, Proceedings of IDETC/CIE 2005:
ASME 2005 International Design Engineering Technical Conferences & Computers and Ingormation in Engineering Conference DETC2005-84807 (2005).
[1]
m
[2]
m
[3]
m
[4]
m
[5]
m
[6]
m
†
Y. Maeda, S. Nishiwaki, K. Izui, M. Yoshimura,
K. Matsui, K. Terada, An Optimum Design Method
for Vibrating Mechanical Structures Based on Topology Optimization Techniques, Proceedings of the 6th
World Congress on Structural and Multidisciplinary
Optimization No. 981 (2005).
†
M. Yoshimura, K. Sasaki, K. Izui, S. Nishiwaki,
Hierarchical Multiobjective Optimization Methods for
Deeper Understanding of Design Solutions and Breakthrough for Optimum Design Solutions, Proceedings
of the 6th World Congress on Structural and Multidisciplinary Optimization No. 1031 (2005).
†
K. Izui, S. Nishiwaki, M. Yoshimura, Swarm Optimization Algorithms Incorporating Design Sensitivities, Proceedings of the 6th World Congress on Structural and Multidisciplinary Optimization No. 4661
(2005).
T. OKUYAMA, H. MATSUHISA, H. UTSUNO,
J. G. PARK, Active Noise Control for a Moving Evaluation Point Using Impulse Response, VS-tech, no.
No.05-202 (2005) 202-207.
K. YAMADA, H. MATSUHISA, H. UTSUNO, J. G.
PARK, Optimum Design of Hybrid Vibration Suppression Using Piezoelectric Elements, VS-tech, no. No.05202 (2005) 133-137.
Y. LIU, H. MATSUHISA, H. UTSUNO, J. G. PARK,
Variable damping and stiffness vibration control by
with two magnetorheological fluid dampers in series,
ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2005) DETC2005-84675.
H. KITAURA, M. ISONO, H. UTSUNO, J. G.
PARK, M. YASUDA, A New Coriolis Dynamic Absorber for Reducing the Swing Gondola, Asia Pacific
Vibration Conference (2005) 211-215.
T. OKUYAMA, H. MATSUHISA, H. UTSUNO,
J. G. PARK, Prediction of the Noise Radiated from
Road with Sound Insulation Wall by Reciprocity Theorem, Asia Pacific Vibration Conference (2005) 108113.
K. YAMADA, H. MATSUHISA, H. UTSUNO,
J. G. PARK, Passive Vibration Suppression in Flexible
Structures Using Piezoelectric Elements, Asia Pacific
Vibration Conference (2005) 525-530.
航空宇宙システム工学講座・制御工学分野
平成 18 年度
[1]
†d
M. Bando, A. Ichikawa, Adaptive output regulation
for linear systems, SICE-ICASE International Joint
Conference 2006 (2006) 3217-3222.
[2] H. Katayama, A. Ichikawa, Robust model predictive
control for sampled-data systems, SICE-ICASE International Joint Conference 2006 (2006) 5120-5125.
[3]
機械力学講座・振動工学分野
平成 18 年度
[1] Y. Liu, H. Matsuhisa, H. Utsuno, A Variable damping
and stiffness semi-active vibration isolation system using magnetorheological dampers, ICSV13 (2006) 559.
∗
T. Sakamoto, H. Katayama, A. Ichikawa, Attitude
control of a helicopter model by robust PID controllers,
joint conferences 2006 IEEE Conference on Control
Applications (CCA), 2006 IEEE Computer Aided Control Systems Design Symposium (CACSD) and 2006
IEEE International Symposium on Intelligent Control
(ISIC) (2006) 1971-1976.
†
A. Ichikawa, Null controllability with vanishing energy for infinite dimensional periodic systems, 17th
International Symposium on Mathematical Theory of
Networks and Systems (2006) 638-642.
[2]
d
[4]
[3]
d
[5] H. Katayama, A. Ichikawa, Receding horizon Hinfinity control for nonlinear sampled-data systems,
17th International Symposium on Mathematical Theory of Networks and Systems (2006) 782-787.
∗
[6]
[4]
K. YAMADA, H. MATSUHISA, H. UTSUNO, J. G.
PARK, Precise Measurement Technique of the Electromechanical Coupling Coefficient of Piezoelectric
Elements, Movic 2006 (2006) MA1-3.
T. OKUYAMA, H. MATSUHISA, H. UTSUNO, J. G.
PARK, Prediction of the measured sound pressure of
traffic noise using interpolation of the transfer function,
MOVIC 2006 (2006) ME2-5.
H. UTSUNO, Y. MORISAWA, Sound quality design
of screw compressor using two sound reducing techniques, Inter-Noise2006 (2006) 176.
平成 17 年度
†
T. Kohda, Accident Analysis of Protective Systems
based on System Control Concept, Proc. Annual Reliability and Maintainability Symp. 2007, no. 13D2
(2007).
[7] T. Kohda, M. Nakagawa, Risk Evaluation of Batch Processes in Chemical Plants using Phased-Mission Analysis, Safety and Reliability for Managing Risk (Ed.
By C. Guedes Soares & E. Zio), Proc. ESREL2006 1
(2006) 151-156.
[8] H. Fujihara, T. Kohda, Probabililstic Safety Assessment of level crossing system in Japanse Railway,
Proc. the 8th International Conference on Probabilistic Safety Assessment and Management (PSAM8), no.
PSAM-0125 (2006).
[1]
[2]
[3]
平成 17 年度
[1]
[2]
[3]
†
H. Nakanishi, K. Inoue, Order Formation in Learning Nonlinear Robust Control Systems by Use of Neural Networks, International Joint Conference on Neural
Networks 2006 (2006).
[4]
†
T. Kohda, Y. Takagi, Accident Cause Analysis of
Complex Systems Based on Safety Control Functions,
Proc. Annual Reliability and Maintainability Symp.
2006 (2006).
†
H. Nakanishi, K. Inoue, A Study on Intelligent Aerorobot for Disaster Response, Advances in Safety and
Relia- bility (Proc. ESREL 2005) 4 (2005) 1730-1734.
[4] T. Kohda, H. Fujihara, Accident Sequence Analysis of
Railway Accidents Based on Safety Control Functions,
Proc. of Asia-Pacific Conference on Risk Management
and Safety (APCRMS2005) (2005).
[5] T. Kohda, K. Yamamoto, Information Management for
Failure Analysis of Fluid Power Systems, Proc. of the
6th JFPS International Symposium on Fluid Power,
TSUKUBA 2005 (2005) 670-675.
[5]
†
Y. Sugimoto, K. Osuka, Implicit Feedback Structure
in Passive Dynamic Walking, Dynamic Walking 2006
(2006).
†
S. Aoi, H. Sasaki, K. Tsuchiya, Turning Maneuvers of
a Multi-legged Modular Robot Using Its Inherent Dynamic Characteristics, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems
(IROS2006) (2006) 180-185.
†
S. Aoi, K. Tsuchiya, Feedback Control of a Simple
Walking Model Driven by an Oscillator, Proceedings
of IEEE International Conference on Robotics and Automation (ICRA2006) (2006) 1990-1996.
†
S. Aoi, K. Tsuchiya, Bipedal Locomotion Control
Using Nonlinear Oscillators, Dynamic Walking 2006
(2006).
[1] K. Tsujita, M. Kawakami, K. Tsuchiya, Optimal Gait
Pattern of a Quadruped Locomotion Robot, 3nd Inernational Symposium on Adaptive Motion of Animals
and Machines (AMAM2005) (2005).
[2]
[3]
[4]
[7] T. Kohda, M. Nakagawa, Dynamic Risk Evaluation
of Complex Systems with Multiple Protective Systems, Progress in Safety Science and Technology (Proc.
APSS2005) 2 (2005) 1329-1337.
[5]
[8] W. Cui, H. Xui, T. Kohda, Determination of Sample
Size for Estimation of Fatigue Life by Using Weibull
Distribution in Reliability Tests, Progress in Safety Science and Technology (Proc. APSS2005) 1 (2005) 447452.
[6]
[10] T. Kohda, W. Cui, Risk-Based Dynamic Configuration
of Safety Monitoring Systems, Advances in Safety and
Relia- bility (Proc. ESREL 2005) II (2005) 1101-1106.
K. Tsuchiya, R. Nakamura, Reconstruction and prediction of chaotic dynamical systems from noisy
data, The 20th Workshop on Complex Systems Modeling(CSM2006) (2006) ???
平成 17 年度
[6] Y. Sakurai, K. Tanaka, T. Nakada, T. Kohda, Simulation
of the Dynamic Characteristics of a Pneumatic Circuit
by OHC-Sim, Proc. of the 6th JFPS International Symposium on Fluid Power, TSUKUBA 2005 (2005) 346351.
[9] T. Kohda, A Simple Method to Derive Minimal Cut
Sets fora Non-Coherent Fault Tree, Advances in Safety
and Relia- bility (Proc. ESREL 2005) II (2005) 10951100.
†
†d
S. Aoi, K. Tsuchiya, Turning of a Biped Robot
Driven by Nonlinear Oscillators, 3nd Inernational
Symposium on Adaptive Motion of Animals and Machines (AMAM2005) (2005).
†d
S. Aoi, K. Tsuchiya, Transition from Quadrupedal to
Bipedal Locomotion, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems
(IROS2005) (2005) 3419-3424.
†
Y. Sugimoto, K. Osuka, Stability Analysis of PassiveDynamic-Walking focusing on the Inner Structure of
Poincare Map, Proc. of 12th International Conference
on Advanced Robotics (ICAR 2005) (2005).
†
Y. Sugimoto, K. Osuka, Stability Analysis and Walking Control of Passive-Dynamic-Walking with an approximate analytical Poincare map, Proc. of IROS
Workshop on Morphology, Control and Passive Dynamics, (2005).
†
K. Osuka, Y. Sugimoto, A Stability Principle of Passive Dynamic Walk –Feedback Structure Embedded in
the Poincare Map–, Proceedings of the 3nd International Symposium on Adaptive Motion of Animals and
Machines, Illmenau, Germany (AMAM2005) (2005).
バイオエンジニアリング講座・医療工学分野
平成 18 年度
平成 17 年度
航空宇宙力学講座
平成 18 年度
生産システム工学講座・生産システム工学分野
平成 18 年度
[1]
†
H. Mizuyama,
Artificial-Neural-Network-Based
MSQIM for Exploratory Analysis of Manufacturing
Data, 7th Asia-Pacific Industrial Engineering and
Management Systems Conference (2006).
[2] H. Mizuyama, A Time-Quality Trade-off Problem of a
Project with Non-Standardized Activities, 36th International Conference on Computers and Industrial Engineering (2006).
[3]
[2]
M. S. Uddin, S. Ibaraki, A. Matsubara, S. Nishida,
Y. Kakino, Constant Engagement Tool Path Generation
to Enhance Machining Accuracy in End Milling, Proc.
of The 3rd International Conference on Leading Edge
Manufacturing in 21st Century (2005) 951-956.
機械力学講座・機械機能要素工学分野
†
H. Mizuyama, Multi-Stage Quality Information
Model for Managing Complex Production Systems,
IIASA - Kyoto University the 3rd Joint International
Seminar on Applied Analysis and Synthesis of Complex
Systems (2006).
[4] H. Mizuyama, TRIZ-Based Systematic Product Innovation through Capturing and Structuring Elemental
Conflicts, 6th International Symposium on Tools and
Methods of Competitive Engineering (2006).
平成 17 年度
[1] H. Mizuyama, Manufacturing Quality Data Mining
through Decision-Tree-Based MSQIM, 18th International Conference on Production Research (2005).
平成 18 年度
[1]
マイクロシステム創成講座・精密計測加工学分野
平成 18 年度
m
D. Kono, A. Matsubara, S. Ibaraki, H. Otsubo,
M. Tsuboi, I. Oshita, Development and Evaluation of
a High-Precision Machining Center with Friction-Less
Drives, 11th International Conference on Precision Engineering (ICPE) (2006).
[2] S. Ibaraki, W. Goto, A. Matsubara, Issues in Laser
Step Diagonal Measurement and Their Remedies,
2006 International Symposium on Flexible Automation
(ISFA06) (2006) 26-29.
∗
A.Kubo, Scope-Extent of validity of rules, Proceedings of the International Conference on Mechanical
Transmissions (2006) 13-18.
[2] M.Komori, A.Kubo, M.Sumi, Y.Masataka, R.Egami,
Scratching of tooth flank of hobbed gears due to chip
crush in cutting edge clearance, Proceedings of the International Conference on Mechanical Transmissions
(2006) 874-879.
[3] A.Kubo, M.Komori, K.Kondo, T.Takatsuji, S.Osawa,
High precision reference artifact for gear checker calibration, Proceedings of the International Conference
on Mechanical Transmissions (2006) 831-836.
[4]
[1]
d
d
F.Takeoka, M.Komori, A.Kubo, H.Fujio, S.Taniyama,
T.Ito, T.Takatsuji, S.Osawa, Laser Interferometric measurement of involute profile by rolling of artifact, Proceedings of the 11th International Conference on Precision Engineering(ICPE) (2006) 89-93.
[5] A.Kubo, K.Kondo, T.Takatsuji, M.Komori, S.Osawa,
K.Naoi, Coming Japanese Standard calibration system
of involute form checker, Proceedings of International
Conference of Metrology (CD-ROM) (2006).
平成 17 年度
[1] M. Komori, A. Kubo, Y. Oda, Y. Matsuoka, Noncontact
Measuring Method of Pitch, Proceedings of LEM21 International Conference on Leading Edge Manufacturing in 21st Century 2 (2005) 335-338.
[3]
d
A. A. D. Sarhan, A. Matsubara, T. Yasuda, Development of a Cutting Force Monitoring System for Intelligent Machining, 2006 International Symposium on
Flexible Automation (ISFA06) (2006).
[2] A. Kubo, K. Kondo, T. Takatsuji, S. Osawa, M. Komori, K. Naoi, Calibration System of involute tooth
form checker using Ball Artifact, Proceedings of VDI
International Conference on Gears 1 (2005) 505-521.
[4]
d
[3] M. Komori, A. Kubo, T. Takahashi, T. Tanaka, Y. Ichihara, Pitting, Chipping and Tooth Breakage due to
Edge Contact, Proceedings of VDI International Conference on Gears 2 (2005) 1309-1324.
M. S. Uddin, S. Ibaraki, A. Matsubara, S. Nishida,
Y. Kakino, A Tool Path Modification Approach to Cutting Engagement Regulation for the Improvement of
Machining Accuracy in 2.5d End Milling, 2006 International Symposium on Flexible Automation (ISFA06)
(2006) 230-233.
[5] M. Mori, M. Fujishima, S. Ibaraki, K. Kashihara, Performance Enhancement of Integrated Machine Tool
Through Use of Direct Motor, 2006 International Symposium on Flexible Automation (ISFA06) (2006) 53-56.
平成 17 年度
[1]
d
A. Matsubara, M. Sugihara, A. A. D. Sarhan,
H. Saraie, S. Ibaraki, Y. Kakino, Research on Spindle and Machining Process Monitoring for Intelligent
Machine Tools, Proc. of The 3rd International Conference on Leading Edge Manufacturing in 21st Century
(2005) 469-474.
[4] T. Takatsuji, K. Kondo, A. Kubo, F. Haertig, S. Osawa,
K. Naoi, T. Kurosawa, M. Komori, Performance assessment of involute gear measurement by CMM using a
double-ball artifact, SPIE Optics & Photonics (2005).
[5] M. Komori, A. Kubo, Y. Oda, Noncontact high-speed
measurement of pitch - Measuring principle -, Proceedings of ICMDT2005 International Conference on Manufacturing, Machin Design and Tribology(CD-ROM)
(2005).
[6] M. Komori, A. Kubo, M. Yamashita, T. Nomura,
C. Ratanasumawong, S. Matsumura, H. Houjoh, Evaluation of gear noise in easiness to notice - Simulation
program and sensual test -, Proceedings of ICMDT2005
International Conference on Manufacturing, Machin
Design and Tribology(CD-ROM) (2005).
1.3 著書・編書
複雑系の数理解析グループ
平成 18 年度
[1]
†
永原正章, 音の百科事典, (2006) 丸善.
平成 17 年度
[1] 藤坂博一, 『リズム現象の世界』（蔵本由紀編）, カ
オス的リズムの同期・非同期現象とその数理, (2005)
185–232, 東京大学出版会.
[2] 青柳富誌生、深井朋樹, 神経細胞の数理モデル, 5 章
1 節, (2005) .
[3] 青柳富誌生、深井朋樹, 細胞集団の同期, 5 章 2 節,
(2005) .
[3] 田畑 修, 京都大学大学院工学研究科 マイクロエ
ンジニアリング専攻 ナノシステム工学講座 ナ
ノ・マイクロシステム分野田畑研究室, 11, (2006)
pp.766–769.
[4] 田畑 修, 集積化分析チップの作製技術，ナノテク・
バイオ MEMS 時代の分離・計測技術, (2006) シーエ
ムシー出版.
[5] 田畑 修, シンクロトロン放射Ｘ線を用いた３次元
微細加工とシミュレーション, (2006) 成形加工学会.
[6] 土屋智由, 加速度センサ (第 5 章第１項), (2006) フロ
ンティア出版.
平成 17 年度
[1] 津守不二夫, 次世代の高精細ナノ・マイクロパター
ニングプロセス, 15 章, (2006) 102–107, サイエンス
＆テクノロジー社.
複雑流体現象の解明とそのモデリンググルー
複雑系の制御・設計論グループ
プ
平成 18 年度
平成 18 年度
[1]
†∗
斧 高一, マイクロプラズマスラスタ− MEMS へ
の応用例−, 「マイクロ・ナノプラズマ技術とその
産業応用」, 第二編, 第 7 章, (2006) 149–164, シーエ
ムシー出版.
[2] H., Makino, H. Tsuji, R. Kurose, Ignition and combustion reaction, (2006) ”CRC Press, Taylor & Francis
Group”.
[3] 鈴木健二郎，岩井裕，金在煥, マイクロガスタービ
ンと燃料電池, 第 18 章, (2006) pp. 232–247, シーエ
ムシー出版.
平成 17 年度
[1] 若林英信, ふく射測定の基礎, 19, (2005) 245.
[2] 吉田英生, マイクロ・ナノ熱流体ハンドブック, 第 6
章第 5 節, (2006) 183–188.
[3] 吉田英生, 熱交換器ハンドブック, 監修および I-1,
(2005) 省エネルギーセンター.
[4] K. Suzuki, H. Iwai, T. Nishino, Electrochemical and
thermo-fluid modeling of a tubular solid oxide fuel cell
with accompanying indirect internal fuel reforming,
(2005) WIT Press.
複雑構造材料の特性解析グループ
平成 18 年度
[1] M. Suzuki, Y. Taga, Selected Papers on
Nanotechnology-Theory and Modeling:
Numerical study of the effective surface area of obliquely
deposited thin films, MS182, (2006) 269–275, SPIE
press.
[2] 田畑 修，土屋智由, 研究室だより−京都大学大学院
工学研究科マイクロエンジニアリング専攻 ナノ・マ
イクロシステム工学研究室, 126-E, (2006) ”p.377,”.
[1]
†
富田直秀他, 人工関節膝のキネマティクス：動揺性
を考える, (2007) メジカルビュー社.
平成 17 年度
[1]
[2]
[3]
†
中西弘明, 井上紘一, ニューラルネットワーク計算
知能, 10, (2006) .
†d
K. Tsuchiya, S. Aoi, K. Tsujita, A Turning Strategy
of a Multi-legged Locomotion Robot, (2005) .
†
H. Kimura, K. Tsuchiya, A. Ishiguro, H. W. (Eds.),
Adaptive Motion of Animals and Machines, (2005)
”Springer-Verlag, Tokyo”.
1.4 解説記事
[1]
複雑系の数理解析グループ
[2]
平成 18 年度
[1]
†
山本裕, ディジタル制御と信号処理, システム/制御/
情報 51-1 (2007) 28-30.
平成 17 年度
[1]
†m
[3]
[4]
船越満明, カオス混合, パリティ 20-12 (2005) 11 ー
†∗
土井謙太郎、阪本俊夫、毎田憲亮、立花明知, 密度
汎関数法による化学反応計算の概要, 真空 49-9 (2006)
4-9.
†
池田 徹，宮崎則幸, 界面破壊力学の異方性材料へ
の展開, 材料 55-2 (2006) 183-193.
†
宮崎則幸, 半導体単結晶育成過程の転位密度評価シ
ミュレーション（1）, 機械の研究 57-7 (2005) 743-749.
†
宮崎則幸, 半導体単結晶育成過程の転位密度評価シ
ミュレーション（1）, 機械の研究 57-6 (2005) 619-626.
12.
[2] 藤岡久也, むだ時間のあるサンプル値制御系の解析
と設計, 計測と制御 45 (2006) 449-445.
複雑系の制御・設計論グループ
平成 18 年度
複雑流体現象の解明とそのモデリンググルー
プ
平成 18 年度
[1] 青木一生, 希薄気体の熱伝達, 機械工学便覧「熱工学」
項目 4・10・2 (2006).
[2]
†∗
斧 高一、 鷹尾祥典, マイクロプラズマスラスター,
応用物理 76-4 (2007) 394-398.
平成 17 年度
[1]
†∗
[1]
椹木哲夫, システム論的視点からみる熟練技能, バ
ルブ技法 21-2 (2006) 8-13.
[2] 中西弘明, 井上紘一, 防災用自律型無人ヘリコプタの
開発, 日本ロボット学会学会誌 24-8 (2006) 20.
[3] 中西弘明, GPS を用いた移動体のナビゲーションと
誘導制御, システム制御情報学「測位衛星技術が支
える社会∼GPS/GNSS の基礎と事例 (2006) 33-39.
[4]
[5]
斧高一、福田武司, 宇宙マイクロ・ナノ工学とシ
リコンナノサテライト連携研究計画, 高温学会誌 第
31 巻-第 5 号 (2005) 252-259.
[2] 花崎秀史, 環境流体解析, 計算力学ハンドブック 第一
版 (2006).
†∗
吉村允孝, 複合問題と分解法, 日本機械学会誌 1091050 (2006) 374-376.
†
青井伸也, 脚ロボットの適応歩行から複雑系機械工
学を考える−京都大学 21 世紀 COE プログラム「動
的機能機械システムの数理モデルと設計論−複雑系
の科学による機械工学の新たな展開−」−, 日本ロ
ボット学会誌 (2007).
†d
[4] 花崎秀史, 成層流体, 二重拡散対流, 物理学辞典 三訂
版 (2005) ”1166-1167, 1665”.
N. Shibata, M. S. Kurtz, N. Tomita, Recent Advances of Mechanical Performance and Oxidation Stability in Ultrahigh Molecular Weight Polyethylene for
Total Joint Replacement: Highly Crosslinked and αTocopherol Doped, Jounal of Biomechanical Science
and Engineering 1-1 (2006) 107-123.
[5] 松本充弘, 分子シミュレーションによるミクロ熱流
体現象の解明, 機械の研究 58-9 (2006) 931.
[7] 小森雅晴, 歯車・動力運動伝達装置における日本の
有力技術, 精密工学会誌 73-1 (2007) 19-22.
[3]
[6]
†
†
河原源太・木田重雄, 乱流の基本秩序構造, パリティ
-20 (2005) 6-7.
[6] 牧野俊郎, 第 12 回国際伝熱会議 (Grenoble 2002) にお
ける Sung Tack Ro 教授の特別講義：””Joseph Fourier:
The Man and His Achievement””, 伝熱 44-11 (2005)
19.
[7] 松本充弘, 分子シミュレーションによる熱物性評価,
熱物性 19-3 (2005) 171.
[8] 富村寿夫，平澤茂樹，岩井裕，大村高弘，小林健一，
羽田光明，吉田英生, Excel による熱流体シミュレー
ションと可視化, 日本航空宇宙学会誌 53-621 (2005)
299-305.
平成 17 年度
[1]
[3] 横小路 泰義, システムインテグレーションの最前線
第 10 回: VR システムインテグレーション, 計測
と制御 44-9 (2005) 646-651.
複雑構造材料の特性解析グループ
[1] 蓮尾 昌裕, 学術調査官（科研費 PO）の役割と文科
省科研費の審査評価, 学術月報 59 (2006) 698.
[2]
†
池田 徹，宮崎則幸, 延性接着剤を用いた接着継ぎ手
の破壊靭性値, 日本接着学会誌 42-9 (2006) 372-379.
平成 17 年度
横小路 泰義, テレオペレーション，ＶＲ，ロボティ
クスから人間を理解する, 計測と制御 45-2 (2006)
1036-1041.
[2] 横小路 泰義, レスキュー支援用操縦型重作業ロボッ
ト「T-52 援竜・改」, 日本ロボット学会誌 24-2 (2006)
113.
[4]
平成 18 年度
†
[5]
[6]
†∗
椹木哲夫, 生態学的視点からみた技能とインタ
フェース設計, 日本ロボット学会誌 23-7 (2005) 779784.
†∗
石橋明、 椹木哲夫, ハイテクかエアマンシップ
か，頼りになるのはどっち？, システム／制御／情
報 49-12 (2005) 497-498.
†∗
椹木哲夫, 情報の法則によるハードウエア工学の
パラダイムシフト, 日本機械学会誌 108-1035 (2005)
88-91.
[7]
†∗
椹木哲夫, ユーザとの状況認識共有のためのイン
タフェース技術の現状, システム制御情報学会誌 49-4
(2005) 139-146.
[8] 中西弘明, 坂東麻衣, 井上紘一, 佐藤彰, 防災用イン
テリジェントエアロロボットの開発, NPO 国際レス
キューシステム研究機構季刊誌 Quaterly Report -1
(2005) 4-23.
[9] 小野里雅彦，中西弘明, 上空からの情報収集, 日本ロ
ボット工業会機関誌-164 (2005) 4-8.
[10] 中西弘明, 坂東麻衣, 井上紘一, 佐藤彰, 防災用イン
テリジェントエアロロボットの開発, NPO 国際レス
キューシステム研究機構季刊誌 Quaterly Report -1
(2005) 4-23.
[11] 小野里雅彦，中西弘明, 上空からの情報収集, 日本ロ
ボット工業会機関誌-164 (2005) 4-8.
[12] 幸田武久、井上紘一, 人間の認知とヒューマンエラー,
電気評論 90-5 (2005) 15-20.
[13] 富田直秀, バイオエンジニアリングの基礎 II(生体材
料設計と生体環境設計), New Diamond 79-21 (2005)
47-50.
[14] 松原厚, リニアモータ駆動の最近の研究・開発成果,
機械技術 53-5 (2005) 18-22.
[15] 松原厚, 工作機械の精密位置決めの制御, 機械の研究
57-12 (2005) 1207-1212.
[16] M. Komori, A. Kubo, A Typical Failure Mode of Gears
for Ultimate High Load-Carrying Capacity, Japanese
Journal of Tribology 50-2 (2005) 207-215.
1.5 国内口頭発表
グループ
研究室数
年度
数理
5
流体
9
材料
11
制御・設計
10
全体
35
H18
H17
H16
H15
小計
H18
H17
H16
H15
小計
H18
H17
H16
H15
小計
H18
H17
H16
H15
小計
H18
H17
H16
H15
小計
口頭発表件数
合計件数 COE 関連
117
91
87
73
86
79
91
68
381
311
99
73
69
60
67
61
87
43
322
237
176
153
183
119
212
142
149
70
720
484
135
85
119
70
176
110
117
44
547
309
527
458
541
444
1970
402
322
392
225
1341
学生による発表件数
合計件数 COE 関連
40
34
33
31
28
27
21
19
122
111
61
56
31
28
41
34
32
11
165
129
96
86
85
56
104
67
87
43
372
252
78
50
65
37
123
82
74
31
340
200
275
214
296
214
999
226
152
210
104
692
博士課程の学生による発表
合計件数 COE 関連
22
22
3
3
2
2
3
3
30
30
17
17
17
17
14
14
10
7
58
55
13
10
9
5
6
5
5
4
33
24
17
13
2
2
4
4
5
5
28
24
69
31
26
23
149
62
27
25
19
133
1.6 特許
平成 17, 18 年度に公開もしくは登録された特許を以下に示す．COE 関連特許にを † 付した．
発明の名称
ＳＯＭニューラルネット学習制御
装置
デジタル/アナログ変換装置及び該
装置に用いるデジタルフィルタの
設計方法
サンプリングレート変換装置
†
ポンプ装置およびそのポンプユ
ニット
半導体処理装置のクリーニング方
法およびシリコン基板のエッチン
グ方法
マイクロデバイスの流体混合反応
促進法及びマイクロデバイス
イオンビーム分析装置
†
光学的センサ及びその製造方法
†
サンドイッチパネルの剥離進展
防止構造
無反射構造及び無反射構造を有す
る光学素子，ならびにその製造方
法及びその製造方法に用いるマス
ク
無反射構造を有する光学素子の製
造方法
微粒子アセンブル構造体とそのア
センブル方法
発明者
青柳富誌生、青木高明
特許権者、出願人
京都大学
登録・公開番号
特開 2007-52677
公開年度
18
山本裕
山本裕
特許第 3820331 号
18
山本裕、永原正章
杉元 宏, 曾根 良夫, 大
林 哲郎
斧 高一、北川 智洋、井
上 實、大沢 正典
山本裕
京都大学, 大阪真空
機器製作所
京都大学、大陽日
酸
特許第 3851757 号
WO/2005/090795
18
17
特開 2006-179834
18
小森 悟，伊藤靖仁
特開 2005-77219
17
特開 2006-153751
WO/2006/073117
特開 2006-282046
18
18
18
田村 隆正，梅谷 誠，田
畑修
富士写真フィルム
ほか６社
京都大学
京都大学
川崎重工業，京都
大学
京都大学，松下電
器産業
特開 2006-171229
18
田村 隆正，梅谷 誠，田
畑修
田畑 修
京都大学，松下電
器産業
京都大学
特開 2006-195289
18
特開 2006-291303
18
木村 健二
鈴木基史，福岡隆夫
廣瀬康夫，北條正樹
マイクロカラムアレイシステム及
びマイクロチャネル粒子構造体
紫外線露光方法，紫外線露光装置，
微細構造体の製造方法，及びこれ
によって製造された微細構造体
†
微生物スクリーニング装置およ
び微生物のスクリーニング方法
微細構造体の製造方法とこれによ
って製造された微細構造体
フィルターおよびその製造方法，
ならびに該フィルターを有するエ
マルジョン生成装置
仮想パワー モニタを備えることに
より制御対象の安定性を評価解析
する機能を備えた制御システム
遠隔操縦装置
遠隔操縦装置
検索装置
データベース作成プログラム，同
プログラムを記録したコンピュー
タ読み取り可能な記録媒体，デー
タベース作成装置，同方法及び
データベース作成システム
構造物の最適設計装置
†
最適設計支援装置、最適設計支
援方法及び最適設計支援プログラ
ム
衝撃振動吸収方法および制振装置
衝撃振動吸収方法およびその装置
揺動体に対するコリオリ力を利用
した吸振器
†
組織欠損補綴材料固定治具
自在型結晶模型
三次元駆動機
田畑 修
京都大学
特開 2006-292636
18
田畑 修
京都大学
特開 2006-317870
18
藤井泰久, 市村直也, 安
田徳元, 田畑修
田畑修
KRI
特開 2005-137288
17
関西 TLO
特開 2005-249809
17
田畑 修，中村 雄志，藤
井 泰久，在間 弘朗
KRI
特開 2005-275304
17
金岡克弥、吉川恒夫
関西 TLO
特許第 3809614 号
18
横小路泰義，佐藤祐司，
河田浩平，白土浩司
横小路泰義，佐藤祐司，
河田浩平，白土浩司
椹木哲夫，堀口由貴男
田雅杰、椹木哲夫
京都大学
特開 2006-334695
18
京都大学
WO/2006/129455
18
京都大学
田雅杰
特開 2006-85389
特許第 3804937 号
18
18
竹澤晃弘，西脇眞二，
泉井一浩，吉村允孝，
西垣英一，鶴見康昭，
菊池昇
山下進介、小林正和、
西脇眞二、泉井一浩、
吉村允孝、富田直秀
松久寛，宇津野秀夫，
安田正志，潘公宇，遠
藤健一，加藤要
松久寛，宇津野秀夫，
安田正志，潘公宇，遠
藤健一，加藤要
松久寛，安田正志
豊田中央研究所
特開 2005-222178
17
京都大学
WO/2006/009026
17
テクノロジーシー
ドインキュベーシ
ョン
テクノロジーシー
ドインキュベーシ
ョン
京都大学，特許機
器
グンゼ株式会社，
信州大学，京都大
学
富田直秀
東芝機械，京都大
学
特開 2005-265132
17
特開 2005-264632
17
特開 2006-258141
18
特開 2006-230874
18
特開 2005-292392
意 匠 登 録 第
1288427 号
17
18
平 嗣良，森川訓行，脇
谷滋之，富田直秀
富田直秀
松原 厚，河野大輔，塩
崎正人，濱村 実
1.7 受賞
受賞者
賞の名称
H19 年度
m
平子俊博
日本機械学会三浦賞
H18 年度
m
嶋田隆広
日本機械学会三浦賞
†
池田 徹、宍戸信之、宮崎則幸 溶接学会シンポジウム賞 Mate 2006 優秀論文賞
安達泰治
日本臨床バイオメカニクス学会 学会奨励賞
小川欽也
日本材料学会衝撃部門委員会業績賞
杉本靖博
ロボット学会研究奨励賞
m
植田充彦
バイオフロンティア
†
鈴木孝明，秦 秀敏，新宅博文， 日本 AEM 学会賞
神野伊策，小寺秀俊
†
谷口忠大，椹木哲夫
2006 年度システム制御情報学会学会賞「論文賞」
†m
荻野岳洋
EMAP2006 Student awards
†
北條正樹
日本複合材料学会フェロー
†m
合原一究
Young Author Award
m
榊原文平
混相流学会学生優秀講演賞
d
Mohammed Sharif Uddin
マザック財団優秀論文表彰
d
竹岡郁
三浦賞
松原厚
2006 年度精密工学会春季大会学術講演会 ベストオーガナイ
ザー賞
杉本靖博
日本機械学会ロボティクスメカトロニクス部門 Robomec 賞
†
杉本靖博
第 11 回ロボティクスシンポジア特別奨励賞
†m
鵜飼 賢
学生プレゼンテーション賞 (第 27 回日本熱物性シンポジウ
ム)
黒瀬良一
APT Distinguished Paper Award, The Society of Powder Technology, Japan
H17 年度
久保愛三 (近畿歯車懇話会)
2005 年度日本機械学会関西支部貢献賞
横小路 泰義，佐藤 祐司，河田 浩 SI2005 ベストセッション講演賞
平，白土 浩司，(株) テムザック
水山 元
日本経営工学会論文賞
†d
谷口忠大
計測自動制御学会学術奨励賞
†d
谷口忠大
計測自動制御学会インテリジェント・システム・シンポジウ
ム 2005 ベスト・プレゼンテーション賞
d
上田淳、吉川恒夫
ファナックＦＡロボット学術賞特別賞
m
嶋田隆広
日本機械学会フェロー賞
木村健二
平成１７年度科学技術分野の文部科学大臣表彰, 科学技術賞
（研究部門）
宮崎則幸
日本機械学会計算力学部門功績賞
†m
加嶋健司
2005 年度計測自動制御学会学術奨励賞
†m
高橋和生
DPS (Dry Process Symposium)
m
植田充彦
関西支部卒研
†m
伊藤慎一
富士裾野 21 世紀フォーラム・奨励賞
†
Taiji Adachi
JACM Award for Young Investigators in Computational Mechanics
†d
杉岡健一，小森悟
日本機械学会賞 (論文賞)
†
Hirose, Y., Hojo, M., Fujiyoshi, A. Best Paper Award, 9th Japan International SAMPE Symposium
and Matsubara, G.
and Exhibition
†
COE 関連の業績での受賞．
d
筆頭受賞者が博士後期課程の学生である．
m
筆頭受賞者が博士後期課程以外の学生である．