VAA46003

VAA46003-R.3659.A
作成承認印 配布許可印
VAA46003
REPAIR MANUAL
Copyright ｃ 2005 by Nikon Corporation.
All Rights Reserved.
無断転載を禁ず !!
Printed in Japan March 2005
VAA46003-R.3659.A
CONTENTS
SPECIFICATIONS ･････････････････････････････････････････････････････････････････････････ Ｍ１－Ｍ２
Disassembly ････････････････････････････････････････････････････････････････････････････････････ Ｄ１
WARNING ･･････････････････････････････････････････････････････････････････････････････････ Ｄ１
Removal of rear cover ･･･････････････････････････････････････････････････････････････････ Ｄ２－Ｄ３
Disassembly of rear cover ･･････････････････････････････････････････････････････････････････････ Ｄ４
Front cover ････････････････････････････････････････････････････････････････････････････ Ｄ５－Ｄ６
Discharging of main condenser ･･････････････････････････････････････････････････････････････････ Ｄ７
RELEASE SWITCH UNIT ･････････････････････････････････････････････････････････････････････ Ｄ７
Top FPC ････････････････････････････････････････････････････････････････････････････････････ Ｄ８
LCD ･･･････････････････････････････････････････････････････････････････････････････････････ Ｄ９
SB PCB ･･････････････････････････････････････････････････････････････････････････････････ Ｄ１０
DC/DC PCB ･･･････････････････････････････････････････････････････････････････････････････ Ｄ１１
Main PCB･････････････････････････････････････････････････････････････････････････････････ Ｄ１１
Lens barrel unit ････････････････････････････････････････････････････････････････････････････ Ｄ１２
Disassembly of battery chamber ･･･････････････････････････････････････････････････････････････ Ｄ１２
CCD ･････････････････････････････････････････････････････････････････････････････････････ Ｄ１３
FINDER UNIT･････････････････････････････････････････････････････････････････････････････ Ｄ１３
Points to notice when disassembling/assembling Lens unit ･･････････････････････････････････････････ Ｄ１４
Front lens group barrel unit ･･･････････････････････････････････････････････････････････････････ Ｄ１４
Barrier unit ････････････････････････････････････････････････････････････････････････ Ｄ１５－Ｄ１６
Barrier turn plate ･･･････････････････････････････････････････････････････････････････ Ｄ１６－Ｄ１７
1st lens group unit ･･････････････････････････････････････････････････････････････････ Ｄ１７－Ｄ１８
1st unit ･･･････････････････････････････････････････････････････････････････････････････････ Ｄ１８
Tension spring ･････････････････････････････････････････････････････････････････････････････ Ｄ１９
Fixed barrel ･･･････････････････････････････････････････････････････････････････････････････ Ｄ２０
Cam barrel ････････････････････････････････････････････････････････････････････････････････ Ｄ２０
Straight barrel unit ･･････････････････････････････････････････････････････････････････････････ Ｄ２１
Shutter unit ････････････････････････････････････････････････････････････････････････ Ｄ２２－Ｄ２４
Cover ring unit ･････････････････････････････････････････････････････････････････････････････ Ｄ２４
CCD mount unit ････････････････････････････････････････････････････････････････････････････ Ｄ２５
Assembly･･･････････････････････････････････････････････････････････････････････････････････････ Ａ１
CCD mount unit ･･････････････････････････････････････････････････････････････････････････････ Ａ１
3rd lens group unit ････････････････････････････････････････････････････････････････････････････ Ａ２
Cover ring unit ･･･････････････････････････････････････････････････････････････････････････････ Ａ３
Shutter unit ････････････････････････････････････････････････････････････････････････････ Ａ３－Ａ５
Straight barrel････････････････････････････････････････････････････････････････････････････････ Ａ６
Cam barrel ･･････････････････････････････････････････････････････････････････････････････････ Ａ７
- E7900 -
VAA46003-R.3659.A
Fixed barrel ･････････････････････････････････････････････････････････････････････････････････ Ａ７
Spring rack ･･････････････････････････････････････････････････････････････････････････････････ Ａ８
1st lens group unit ････････････････････････････････････････････････････････････････････････････ Ａ９
Barrier turn plate ･･･････････････････････････････････････････････････････････････････････････ Ａ１０
Blade opening spring ････････････････････････････････････････････････････････････････････････ Ａ１０
Barrier unit ････････････････････････････････････････････････････････････････････････････････ Ａ１１
Barrier cover ring ･･･････････････････････････････････････････････････････････････････ Ａ１１－Ａ１２
Knurled gear･･･････････････････････････････････････････････････････････････････････････････ Ａ１３
Front lens group barrel unit/CCD mount unit ･････････････････････････････････････････････ Ａ１４－Ａ１５
FFD Inspection and adjustment (*FFD:Flange Focal Distance)(*Distance)･･････････････････････････････ Ａ１６
Preparation･･････････････････････････････････････････････････････････････････････････････ Ａ１６
FFD inspection and adjustment ･･････････････････････････････････････････････････････ Ａ１６－Ａ１８
FFD adjustment ･･････････････････････････････････････････････････････････････････････････ Ａ１９
"How to calculate ""washer amount"" for the FFD adjustment"･････････････････････････････････････ Ａ１９
Resolution inspections ･･･････････････････････････････････････････････････････････････････････ Ａ２０
CCD ･････････････････････････････････････････････････････････････････････････････････････ Ａ２１
FINDER UNIT･････････････････････････････････････････････････････････････････････････････ Ａ２２
Assembly of battery chamber･･････････････････････････････････････････････････････････････････ Ａ２３
Lens barrel unit ････････････････････････････････････････････････････････････････････････････ Ａ２４
Main PCB･････････････････････････････････････････････････････････････････････････････････ Ａ２４
DC/DC PCB ･･･････････････････････････････････････････････････････････････････････････････ Ａ２５
SB PCB ･･････････････････････････････････････････････････････････････････････････････････ Ａ２６
LCD ･････････････････････････････････････････････････････････････････････････････････････ Ａ２７
Top FPC ･･････････････････････････････････････････････････････････････････････････････････ Ａ２８
RELEASE SWITCH UNIT ･･･････････････････････････････････････････････････････････････････ Ａ２９
Front cover ････････････････････････････････････････････････････････････････････････ Ａ３０－Ａ３１
Assembly of rear cover･･･････････････････････････････････････････････････････････････････････ Ａ３２
Installation of rear cover ･････････････････････････････････････････････････････････････ Ａ３３－Ａ３４
ADJUSTMENT ･･･････････････････････････････････････････････････････････････････････ Ａ３５－Ａ４５
DISCRIPTION OF CIRCUIT･････････････････････････････････････････････････････････････････ Ｅ１－Ｅ７
ELECTRICTIY･･････････････････････････････････････････････････････････････････････････････････ Ｅ８
OVERALL WIRING ･･････････････････････････････････････････････････････････････････････････ Ｅ８
CP1(DMA) CIRCUIT DIAGRAM ･･･････････････････････････････････････････････････････････････ Ｅ９
CP1(SYA) CIRCUIT DIAGRAM ･･････････････････････････････････････････････････････････････ Ｅ１０
CP1(CAA) CIRCUIT DIAGRAM･･････････････････････････････････････････････････････････････ Ｅ１１
CP1(VFA) CIRCUIT DIAGRAM ･･････････････････････････････････････････････････････････････ Ｅ１２
CP1 (CAB) CIRCUIT DIAGRAM ･････････････････････････････････････････････････････････････ Ｅ１３
PW1 CIRCUIT DIAGRAM･･･････････････････････････････････････････････････････････････････ Ｅ１４
- E7900 -
VAA46003-R.3659.A
OVERALL BLOCK DIAGRAM･･･････････････････････････････････････････････････････････････ Ｅ１５
CCD BLOCK DIAGRAM ････････････････････････････････････････････････････････････････････ Ｅ１６
LENS BLOCK DIAGRAM ･･･････････････････････････････････････････････････････････････････ Ｅ１７
ASIC BLOCK DIAGRAM ･･･････････････････････････････････････････････････････････････････ Ｅ１８
SYSTEM CONTROL BLOCK DIAGRAM ･･････････････････････････････････････････････････････ Ｅ１９
POWER BLOCK DIAGRAM ･････････････････････････････････････････････････････････････････ Ｅ２０
FUSE configuration (PW1 PCB) ･･･････････････････････････････････････････････････････････････ Ｅ２１
INSPECTION STANDARDS･････････････････････････････････････････････････････････････････ Ｒ１－Ｒ８
TOOL LIST ･･････････････････････････････････････････････････････････････････････････････ Ｔ１－Ｔ５
- E7900 -
VAA46003-R.3659.A
SPECIFICATIONS
Type
E7900 digital camera
Effective pixels
7.1 million
CCD
1/1.8” high-density CCD; total pixels: 7.41 million
Image size (pixels)
・ 3,072 × 2,304 [7M] ・ 2,592 × 1,944 [5M] ・ 2,048 × 1,536 [3M]
・ 1,024 × 768 [PC] ・ 640 × 480 [TV]
Lens
3 × Zoom-Nikkor ED lens
Focal length
F=7.8 - 23.4 mm (35-mm [135] camera-format equivalent:38 - 114 mm)
f/-number
f/2.8 - f/4.9
Construction
Seven elements in six groups (includes 1 glass-molded EDlens elements)
Digital zoom
Up to 4 × (35-mm [135] camera-format equivalent: 450 mm)
Autofocus (AF)
Contrast-detect through-the-lens (TTL) AF, AF-assist illuminator
Focus range
30 cm (1') - ; macro mode 4 cm/1.6” (W) - ∞
Focus area selection
Auto (five-area automatic selection), Manual (99-area manual selection), Off (center
focus area selection)
AF-assist illuminator
CLASS 1 LED PRODUCT (IEC60825-1 Edition 1.2-2001)
Maximum output: 1700 μ W
Viewfinder
Real-image zoom viewfinder with LED indication
Magnification
0.31 - 0.77 ×
Frame coverage
Approximately 75% holizontal and 75% vertical
Monitor
2.0” , 115,000-dot, amorphous silicon TFT transflective LCD with brightness
adjustment
Frame coverage
Approximately 100% horizontal and 100% vertical
(shooting mode)
Storage
Media
Internal memory (approximately 13.5MB)/SD (Secure Digital) Memory cards
File system
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital
Print Order Format (DPOF)
File formats
Compressed: JPEG-baseline-compliant (1:4, 1:8, 1:16)
Movies: Quick Time Sound files: WAV
Exposure
Metering
Four mode through-the-lens (TTL) metering;
・ 256-segment matrix ・ Spot ・ Center-weighted ・ Spot AF area
Exposure control
Programmed auto exposure with exposure compensation
(-2.0 - +2.0EV in steps of 1/3EV), Auto bracketing
Range
W: +1 - +16.5EV
T: +2.6 - +18.1EV
(Sensitivity: Auto)
- M1･ E7900 -
VAA46003-R.3659.A
Shutter
Speed
Aperture
Range
Sensitivity
Mechanical and charge-coupled electronic shutter
4 - 1/2,000s
Electronically-controlled preset aperture
Two steps (f/2.8 and f/4.8 [W])
Approximately equivalent to ISO 50, 100, 200, 400; Auto
(auto gain to ISO 200 equivalent)
Self-timer
Ten-second, three-second duration
Built-in Speedlight
Range (approx.)
0.3 - 4.5 m/1’ - 14’ 8” (W)
0.3 - 3.5 m/1’ - 11’ 5” (T)
(Sensitivity: Auto)
Flash control
Sensor flash system
Interface
USB
Video output
Can be selected from NTSC and PAL
I/O terminals
DC in; Digital I/O (audio-visual out and USB)
Supported language
Chinese (Simplified and Traditional), Dutch, English,
French, German, Italian, Japanese, Korean, Spanish, Swedish
Power sources
・ One rechargeable Nikon EN-EL5 (Rechargeable lithiumion battery; supplied)
・ One CP1 lithium battery ・ EH-62A AC adapter kit (available separately)
Approximate battery life
Approximately 220 shots (EN-EL5)/250 shots (CP1)
Based on CIPA standard*
Dimensions
Approximately 88 × 60 × 36.5 mm/3.46” × 2.4” × 1.44”
(W × H × D)
(excluding projection parts)
Approximate weight
150 g (5.3 oz) without battery or memory card
Operating environment
Temperature
0 - 40° C (32 - 104° F)
Humidity
Less than 85% (no condensation)
＊ Industry standard for measuring life of camera batteries. Measured at 25 ° C (77 ° F); zoom adjusted with each shot,
built-in Speedlight fired with every other shot, image mode set to NORM/
- M2･ E7900 -
.
VAA46003-R.3659.A
Disassembly
� �������
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
��������������������������������������������������
Points to notice for Lead-free solder products
・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder. They
cannot be used in common.
Note : ① Be sure to remove the SD memory card and batteries before disassembly.
② When disassembling, make sure to memorize the processing state of wires, screws
to be fixed and their types, etc.
③ Because electrical parts are easily damaged by static electricity, make sure that you
are well earthed/grounded.
- D1･ E7900 -
VAA46003-R.3659.A
Removal of rear cover
1. Removal of screws
・Remove the two screws (811).
・Remove the two screws (810).
Screws (810)
Screws (811)
・Remove the two screws (809).
Screws (809)
- D2･ E7900 -
VAA46003-R.3659.A
2. Removal of rear cover
・Open the SD case (B351) and the battery case (B341).
・Open the bottom of the rear cover and then the top of it. (Be careful because the FPC connected with the rear cover is
attached to the body.)
SD case (B351)
Bottom of rear cover
Battery case (B341)
・Pull out the FPC.
・Remove the connector.
・The rear cover can be removed.
FPC
Rear cover
Connector
- D3･ E7900 -
VAA46003-R.3659.A
Disassembly of rear cover
・Take off the rear FPC insulating seal (719).
・Remove the six screws (819).
・The rear SW unit (1018) can be removed.
・The determining button spring (245) can be removed.
・The speaker (1025) can be removed.
・Remove the determining button (241).
・Remove the switch rubber (244).
・The multi-selector (242) can be removed.
Speaker (1025)
Switch rubber (244)
Determining button (241)
Screws (819)
Multi-selector (242)
Determining button spring (245)
Rear SW unit (1018)
Rear FPC insulating seal (719)
Screws (819)
- D4･ E7900 -
VAA46003-R.3659.A
� �������
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
��������������������������������������������������
Front cover
1. Removal of strap (at grip side)
2. Removal of strap (at the battery cord cover side)
・Close the SD case (B351).
・As pulling the strap (125) toward your side, lift its top and
・Remove the strap (126).
remove it.
・The battery cord cover (362) can be removed.
・The USB cover (361) can be removed.
Strap (126)
Strap (125)
SD case (B351)
Battery cord cover (362)
USB cover (361)
3. Removal of tripod socket
・Remove the two screws (810).
・Remove the tripod socket (B371).
Screws (810)
Tripod socket (B371)
- D5･ E7900 -
VAA46003-R.3659.A
4. Removal of front cover/fixed barrel curtain
・Remove the two screws (808).
・Remove the two screws (811).
Screws (811)
Screws (808)
・Remove the front cover.
・The fixed barrel curtain (618) can be removed.
2A
L5010
VR501
2A
L5009
R5004
R5006
R5002
C5024
L5006
C5025
D5007
F5002
F5002
C5009
R5036
C5032T5001 C5028
L5002 C5037
C5033
C5023
VA502
R5032
R5043
R5033
C5031
F5001
R5009
IC501
C9602
C9601
C9603
Q5001
D9601
C5029
Q9601
R5035
C5030
L5001
R5046
D5004
F5004
+
R5034
C5035
L5005 D5003
R5201
T
R9604
D5006
F5004 F5001
R9607
Q9602 Q5007
C5036
L5003
VR501
C9604
+
L5004 Q5004
Q5003
2A
IC961
R9606
Q5002 L5007
+
L9601
C5016
2A
Fixed barrel curtain (618)
C5022 D5001
F5001 、F5004
-
F5005
F5005
+
BK RD
F5005
F5002
SIDE-B
F3300AA
SWQ14_PW1
・ Under this condition, it is possible to replace fuses of F5001,
F5002, F5004 and F5005 with new ones.
- D6･ E7900 -
VAA46003-R.3659.A
� �������
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
��������������������������������������������������
Discharging of main condenser
Cord arranging tape (715)
2KΩ/5W
Main condenser
RELEASE SWITCH UNIT
・Remove the strap (124).
・ Turn up the tape and remove the FPC.
・Remove the release SW unit (1016).
Release SW unit (1016)
Strap (124)
Tape
FPC
- D7･ E7900 -
VAA46003-R.3659.A
Top FPC
・Take off the FPC(A) from the double adhesive tape.
FPC (A)
・Remove the two screws (812).
・Remove the screw (801).
・Remove the FPC(B) from the connector
・Remove the top FPC.
Screws (812)
Top FPC
FPC (B)
Screw (801)
- D8･ E7900 -
VAA46003-R.3659.A
LCD
・Remove the three screws (815).
LCD
Screws (815)
Lug plates (394)
Screws (815)
（Fig.1）
・Lift up the LCD. Then, remove the FPC, the connector and the LCD.
・Remove the lug plates (394).
・Remove the chassis (152).
LCD
Chassis (152)
FPC
Connector
- D9･ E7900 -
VAA46003-R.3659.A
SB PCB
Lead wires [black] and [red]
1. Removal of cords/tapes
Cord arranging tapes (717)
・Take off the two cord arranging tapes (717).
・Remove the one cord arranging tape (716).
Microphone (1023)
・Remove the lead wire [black] and the lead wire [red].
Cord arranging tape (716)
Cord arranging tapes (717)
2. Removal of harness
Connector
・Remove the SB control harness (1013) from the connector.
SB control harness (1013)
3. Removal of condenser/microphone/SB PCB
（Fig.1）
・Remove the condenser.
・Remove the connector (Fig. 1) and then remove the microphone (1023).
・Take off the SB insulating sheet (711).
・Remove the two screws (804).
・The SB PCB can be removed.
Condenser
Cord arranging tape (716)
SB PCB
Screws (804)
SB insulating sheet (711)
Microphone (1023)
Screws (804)
- D10 ･ E7900 -
VAA46003-R.3659.A
DC/DC PCB
・Remove the solder of the armature.
・Remove the two screws (816).
Screws (816)
・Remove the DC/DC PCB from the main PCB connector.
・The strap eyelet (381) can be removed.
Armature
Strap eyelet (381)
DC/DC PCB
Position of the main PCB connector (Rear surface)
Main PCB
・Remove the FPC.
・Perform unsoldering.
・Remove the screw (803).
・Remove the two screws (818).
・Remove the lug plate (392).
・Remove the main PCB (B1001).
FPC
・Remove the lug plate (397).
Lug plate (392)
Screws (818)
はんだ
Screw (803)
Main PCB (B1001)
- D11 ･ E7900 -
Lug plate (397)
VAA46003-R.3659.A
Screws (803)
Lens barrel unit
・Remove the two screws (803).
Chassis (151)
・Remove the two screws (801).
Screws (801)
・The chassis (151) can be removed.
・The battery chamber unit (B10345) can be removed.
Screws (803)
Battery chamber unit (B10345)
Disassembly of battery chamber
・Remove the two screws (802)
・Unlock the SD case unit (B351) and then remove the SD case unit (B351).
・Remove the lug plate (395).
・Remove the two screws (802)
・Unlock the battery case unit (B341) and then remove the battery case (B341).
・The battery spring (350) can be removed.
SD case unit (B351)
Battery chamber
Screws (802)
Lug plate (395)
Battery spring (350)
Battery case (B341)
- D12 ･ E7900 -
Screws (802)
VAA46003-R.3659.A
CCD
・Remove the Light-shiled sponge (741).
・Remove the two screws (813).
・Remove the CCD PCB.
・The CCD rubber (609) can be removed.
・The LPF (8) can be removed.
・The LPF mask (624) can be removed.
Screws (813)
CCD PCB
CCD rubber (609)
LPF (8)
LPF mask (624)
Light-shiled sponge (741)
FINDER UNIT
・Remove the three screws (815).
・The finder unit (B501) can be removed.
Screws (815)
Finder unit (B501)
- D13 ･ E7900 -
VAA46003-R.3659.A
Points to notice when disassembling/assembling Lens unit
When the following parts are replaced for repairing the lens unit, the lens unit checking tool is required for the
FFD inspection and adjustment. Therefore, at service facilities where there is no tool, do NOT make a replacement
・1st lens group (B601）
・2nd lens group（6B999-112）
・3rd lens group（B603）　・CCD stand unit（6B999-113）
When the operation check and adjustment of the lens unit are made for repairing the lens unit,the following
tools are required.
・Lens unit checking tool
：
J61202
・Connection cable for lens
：
J61202E
・PCI I/F board
：
J61204
・Connection cable for PC
：
J61204A
・Adjusting focus stand for APS
：
J15327
・Adapter for J15327
：
J15327A
・Adapter for J15327 E4200/E5200
：
J15327B
・E5200/E4200 lens unit checking program ：
J65067
- D14 ･ E7900 -
VAA46003-R.3659.A
Front lens group barrel unit
・Take off the polyester tape #693 from the fixed barrel #612.
#612
#693
・Take off the FPC from the double adhesive tape #695.
#695
ＦＰＣ
① Remove the shutter FPC from the connector.
② Remove the screw #681 from the cover ring side of the lens barrel. Remove the three screws #681 from the
CCD mount unit.
#681 × 3
CCD mount unit
Cover ring side of the lens barrel
#681
①
Connector
- D15 ･ E7900 -
#608
VAA46003-R.3659.A
・Disassembly of zoom gear
#608
#681
#649
#645
#648
#644
#646
#681
① Remove the screw #681 from the CCD mount unit. Then, remove the FFD
adjusting washer #608.
② Remove the gears #644, #645 and #646 and the shafts #648 and #649.
Barrier unit
1. Disassembly of barrier cover ring
・Turn the cam barrel in the arrow "A" direction and extend the lens barrel.
・Take off the barrier cover ring #666 from the double adhesive tape #697.
#666
#697
・Turn the cam barrel in the arrow "B"
direction and retract the lens barrel.
- D16 ･ E7900 -
VAA46003-R.3659.A
2. Disassembly of barrier
・Remove the two screws #697 and then disassemble the barrier unit B662.
#697 × 2
B662
Barrier turn plate
・Remove the blade opening spring #669.
#663
#615
#669
- D17 ･ E7900 -
VAA46003-R.3659.A
・Remove the barrier turn plate #663.
#663
1st lens group unit
・Remove the 1st lens group B601 and the partition washer #627 from the 1st lens group barrel #615.
B601
#627
#615
- D18 ･ E7900 -
VAA46003-R.3659.A
Tension spring
・Take the three 1st lens group spring sheets #619.
#619
・Remove the three springs #605 from the spring racks.
#605
- D19 ･ E7900 -
VAA46003-R.3659.A
Fixed barrel
・Remove the cam barrel from the fixed barrel #612.
Cam barrel
#612
Cam barrel
・Remove the cover ring unit from the cam barrel.
Cover ring unit
Cam barrel
- D20 ･ E7900 -
VAA46003-R.3659.A
Straight barrel unit
・Remove the 2nd lens group unit from the straight barrel unit.
2nd lens group unit
Straight barrel unit
・Remove the 1st lens group barrel #615 from the straight barrel #614.
#615
#614
- D21 ･ E7900 -
VAA46003-R.3659.A
Shutter unit
1. Removal of sheets
・Take off the light baffle sheet #622 and the reflection preventive sheets #626, #636, #637 and #638.
#626
#638
#622
#636
#637
・Take off the reflection preventive sheets #639 (2 pcs.) and #640.
#639
#639
#640
- D22 ･ E7900 -
VAA46003-R.3659.A
2. Removal of tension spring
・Remove the three springs #605 from the 2nd lens group unit.
#605
3. Removal of shutter flexible retainer
・Release the hook and then remove the shutter flexible retainer #625.
Hook
#625
- D23 ･ E7900 -
VAA46003-R.3659.A
4. Removal of 2nd lens group unit
・Remove the two shutter unit mounting screws #682.
・Remove the 2nd lens group unit from the shutter unit
#606.
2nd lens group
unit
#682 × 2
#606
Cover ring unit
・Remove the cover ring B616 from the cam barrel #613. (It is adhered with the double adhesive tape.)
#B616
#613
- D24 ･ E7900 -
VAA46003-R.3659.A
CCD mount unit
・Remove the solder between the zoom motor terminal unit B655 and the lens barrel FPC.
Soldering section
B655
① The zoom motor unit B655 is set on the CCD mount unit by the two screws #681. Remove these screws.
② Remove the gears #642 and #643, the blade gear #647, and the blade axle #650.
③ Remove the 3rd lens group unit B603 from the CCD mount unit. Take off the reflection preventive sheets #623 and
#626.
CCD mount unit
#647
#650
#642
#643
B655
#681 × 2
#604
#694
B603
#623
#626
- D25 ･ E7900 -
VAA46003-R.3659.A
Assembly
CCD mount unit
・Assembly of zoom motor unit
#642
① Set the gear #643 onto the convex section of the CCD mount unit.
② Set the blade axle #650, the blade gear #647 and the gear #642 onto the CCD
mount unit.
#650
#647
#643
① Set the zoom motor unit #B655 onto the CCD mount unit with the two screws #681.
② Perform soldering between the terminal unit of the zoom motor and the lens barrel FPC.
#681 × 2
#B655
Soldering section
- A1･ E7900 -
VAA46003-R.3659.A
3rd lens group unit
① Set the 3rd lens group unit B603 and the 3rd lens group guide shaft #604 onto the CCD mount unit.
② Lubricate the 3rd lens group guide shaft #604 with the oil MZ-800S.
③ Adhere the polyester tape #694, the reflection preventive sheet #626 and the light baffle sheet #623.
#694
#604
Oil: MZ-800S
#623
#626
B603
#626
#623
- A2･ E7900 -
VAA46003-R.3659.A
Cover ring unit
① Set the cover ring B616 (A) onto the cam barrel #613. (Adhere it with the double adhesive tape.)
② After setting, check the clearance between the cover ring B616 (A) and the cam barrel #613. When the clearance is
0.2mm or more, set the cover ring B616 (B).
B616(A)
B616(A)
#613
Check the
clearance.
#613
Shutter unit
1. Setting of shutter unit onto the 2nd lens group unit
・Set the shutter unit #606 onto the 2nd lens group unit.
Note：When setting, be careful not to bend or cut the FPC.
2nd lens group unit
・Fix the shutter unit with the two screws #682.
#606
#682 × 2
- A3･ E7900 -
VAA46003-R.3659.A
2. Setting of shutter flexible retainer
・Insert the hook of the shutter flexible retainer #625 into the hole.
#625
Hook
Hole
3. Setting of tension spring
① Hitch the three tension springs #605 onto the 2nd lens group unit.
② Apply the screw lock to the spring racks (3 places).
Adhesive: Screw lock
#605 × 3
- A4･ E7900 -
VAA46003-R.3659.A
4. Adhesion of sheets
・Adhere and push the reflection preventive sheets #639 (2 pcs.) and #640.
#639
#639
#640
・Adhere and push the light baffle sheet #622 and the reflection preventive sheets #626, #636, #637 and #638.
#626
#638
#622
#636
#637
- A5･ E7900 -
VAA46003-R.3659.A
Straight barrel
① Lubricate the sliding surface and the contact surface of the straight barrel #614 and the 1st lens group barrel #615
with the oil MZ-800S. Then, set them to each other.
#615
Vertical groove (6 places)
V notch
V notch
#614
Oil: MZ-800S
To contact surface and sliding surface
Oil: MZ-800S
To the convex section (6 places)
② Set the 2nd lens group unit into the straight barrel unit.
2nd lens group unit
Straight barrel unit
- A6･ E7900 -
VAA46003-R.3659.A
Cam barrel
・Lubricate the groove, the contact surface and the sliding surface of the cam ring with the oil MZ-800S. Then, set the
cover ring unit.
Cover ring unit
Convex section
Oil: MZ-800S
To groove, contact surface and sliding surface of
cam ring
Cam groove
Cam barrel
Fixed barrel
① Lubricate the groove (3 places), the contact surface and the sliding surface of the fixed barrel #612 with the oil
MZ-800S.
② Pass the shutter FPC through the hole of the fixed barrel #612. Fit the convex section of the cam barrel #613 to the
cam groove of the fixed barrel #612 and set them to each other.
#613
Oil: MZ-800S
To convex section
Oil: MZ-800S
To groove, contact surface and sliding surface of the
fixed barrel
#612
Cam groove
- A7･ E7900 -
VAA46003-R.3659.A
Spring rack
① Turn the cam barrel #613 of the lens barrel unit to the Tele position.
② Hitch the hook of the spring #605 to the hole of the 1st lens group barrel #615 by using a spring hitching tool. Then, pull
up the spring and hitch it to the spring rack of the 1st lens group barrel.
Inspection：
① Check the spring hitched condition.
② Check the zoom operating condition.
#613
(Tele position)
Spring hitching tool
Spring rack
#615
#605 Spring rack (3 places)
③ Adhere and push the three 1st lens group spring sheets #619 onto the 1st lens group barrel #615.
#619
#615
④ Turn the cam barrel #613 of the lens barrel unit in the reversed direction of ① to the Wide position.
- A8･ E7900 -
VAA46003-R.3659.A
1st lens group unit
・Adhere the light baffle sheet #621 to the 1st lens group unit B601.
#621
1st lens group unit B601
・Set the partition washer #627 onto the 1st lens group unit B601 and retighten it.
B601
#627
#615
- A9･ E7900 -
VAA46003-R.3659.A
Note: When replacing the following components with new ones in the repair of the lens barrel, it is necessary
to inspect and adjust the FFD. So, after inspecting and adjusting the FFD, assemble the barrier unit as
mentioned in A10 and A11.
・1st lens group unit (B601)
・2nd lens group unit (6B999-112)
・3rd lens group unit (B603)
・CCD mount unit (6B999-113)
Barrier turn plate
・Lubricate the contact surface of the barrier turn plate #663 and the 1st lens group barrel #615 with the oil MZ-800S.
Then, set them to each other.
#663
To contact surface
Oil: MZ-800S
#615
Blade opening spring
・Set the blade opening spring #669 onto the 1st lens group barrel #615 and the barrier turn plate #663.
#663
#615
#669
- A10 ･ E7900 -
VAA46003-R.3659.A
Barrier unit
・Set the barrier unit B662 onto the 1st lens group barrel #615 and fix it with the two screws #697.
#697 × 2
B662
#615
Barrier cover ring
・Turn the lens barrel in the arrow direction to where the convex section is seen.
・Adhere the double adhesive tape #697 onto the barrier unit B662 and set the barrier cover ring #666.
#666
Notch
#697
B662
Convex section
- A11 ･ E7900 -
VAA46003-R.3659.A
・Turn the cam barrel #613 in the arrow direction to the reset position.
#613
・Assembly of zoom gear
① Lubricate the gear #644 with the oil G-92KA.
② Lubricate the gear shaft #649 with the oil G-92KA.
③ Set the gear shaft #649 into the gear #644. Then, set them onto the fixed barrel #612.
④ Set the gear #645 onto the fixed barrel #612.
#649
Oil: G92KA
#645
#644
Oil: G92KA
#612
- A12 ･ E7900 -
VAA46003-R.3659.A
Knurled gear
・ Hold the knurled shaft #648 with its stepped end at the top side and then insert it into the larger hole of the
knurled gear #646.
#648
#612
#646
- A13 ･ E7900 -
VAA46003-R.3659.A
Front lens group barrel unit/CCD mount unit
・Set the CCD mount unit onto the front lens group barrel unit and fix it with the three screws #681 and another screw
#681, which is inserted from the cover ring side.
Note：When setting, be careful not to catch the FPC.
#681 × 3
CCD mount unit
#681
Cover ring side of lens barrel
Front lens group barrel
unit
① Set the FFD adjusting washer #608 onto the CCD mount unit with the screw #681.
② Insert the shutter FPC into the connector and perform connection.
Note：Don't catch the FPC with the tips of tweezers.
CCD mount unit
#681
②
Connector
- A14 ･ E7900 -
#608
VAA46003-R.3659.A
・Adhere the double adhesive tape #695 onto the fixed barrel #612. Then, adhere the FPC.
#695 (rear side)
#B671
・Adhere the FPC, which exists on the fixed barrel #612, with the polyester tape #693.
#612
#693
- A15 ･ E7900 -
VAA46003-R.3659.A
FFD Inspection and adjustment (*FFD:Flange Focal Distance)
Preparation
・Turn the objective glass of the collimator (J19019), and set degree
to "0" (0 mm).
・Set the 0-position of the“adjusting focus stand for APS (J15327)”as follows:
Note: Replace the white acrylic plate of the above stand (J15327) with the new one (J15327A).
1. Put the adapter (J15327B) on the white acrylic plate (J15327A) of the stand (J15327). Align the upper surface of the
white acrylic plate of the adjusting focus stand (J15327) with the mirror reflecting surface. Press the reset button of the
Adjusting focus stand, and set the 0-position.　Note: Because the mirror reflecting surface is easily damaged, be careful of the above alignment by using dial gauge,
etc.
2. Based on the above 0-position, turn the knob of the adjusting focus stand further to set the -2.357-mm position.
3. Press the reset button of the adjusting focus stand again, and set the 0-position.　Adapter (J15327B)
White acrylic plate (J15327A)
FFD inspection and adjustment
Zoom position
Collimator
Wide-side
Tele-side
FFD standard
+0.044 mm
-0.183 mm
+0.044 mm
-0.183 mm
Lens (-barrel) unit
Adjusting focus stand for APS (J15327)
At the position where the color of vertical lines shifts from
blue to red, read the measurement value of the Adjusting
focus stand.
- A16 ･ E7900 -
VAA46003-R.3659.A
・ By using the lens unit checking tool, set the lens unit at WIDE- or TELE-position, then remove the barrier cover
ring (#666), the barrier unit (B662) and the barrier turning plate (#663).
・ Remove the screw (#681) of the lens unit.
Screw (#681)
Lens (-barrel) unit
Washer (#608)
・ Put the adapter (J15327B), which was on the stand, on the lens unit.
・ As shown below, mount the lens unit on the adjusting focus stand (J15327A).
Adjusting focus stand for APS
(J15327)
- A17 ･ E7900 -
VAA46003-R.3659.A
・ After mounting the lens unit on the adjusting focus stand (J15327), connect the wire (J61202E) of the lens unit checking
tool (J61202).
Lens(-barrel) unit
Wire (J61202E)
Adjusting focus stand for APS (J15327)
・ Hold the lens unit lightly with a hand, and run the program for checking the lens unit.
Note: If the lens unit is held too tightly, the FFD value cannot
be measured correctly.
Note: Refer to supplied user manuals of lens unit checking
tool for how to run the program for checking the lens
unit.
・On the main menu of the lens unit checking program, click on "FFD Check" icon, and measure the FFD value according
to instructions of the PC screen.
Note: At the position where the color of vertical lines shifts from blue to red, read the measurement value of the adjusting focus stand.
- A18 ･ E7900 -
VAA46003-R.3659.A
FFD adjustment
・Make the lens focusing adjustment for alignments from WIDE through TELE by using washers (#608A-D and #627A-D)
so that the FFD measurement value within standard of the below.
Zoom position
Wide-side
Tele-side
FFD standard
+0.044 mm
-0.183 mm
+0.044 mm
-0.183 mm
Measured value in relation to reference value (-2.357mm)
-2.401　～　-2.174
-2.401　～　-2.174
Washer (#608)
#B601
#627
#615
How to calculate "washer amount" for the FFD adjustment
① Measure Δ FFDW (Difference from the reference value "-2.357" at Wide) and Δ FFDT (Difference from the reference value "-2.357" at Tele) by using the lens unit checking tool.
② By assigning the values of Δ FFDT and Δ FFDW to the next formula, calculate "washer amount A" for #627 (the 1st
lens group positioning adjustment).
・A ＝ ( Δ FFDT －Δ FFDW)/1.84 + ("washer amount" for #627 attached)
③ By assigning the value of "washer amount A" to the next formula, calculate "washer amount B" for #608 (the CCD
positioning adjustment).
・B ＝ Δ FFDW + (0.26 ｘ A) + ("washer amount" for #608 attached)
④ Select the washers (#608 and #627) of which the thickness is approximate to the calculated A and B.
Note: If the washer (#627) is thickened, the FFD value of the Tele-side shifts to minus direction.
Note: If the washer (#608) is thinned, the FFD value (of the both Wide and Tele side) shifts to plus direction.
- A19 ･ E7900 -
VAA46003-R.3659.A
Resolution inspections
When the lens unit has been disassembled or repaired, set the lens unit into the camera body and then carry out the
resolution inspection as shown below.
・Resolution inspection
Take a shot of ITE high-resolution chart (J63079) and check if the number of TV lines is within standard.
Standard TV lines: 1300 or more TV lines in the center; 800 or more TV lines in periphery
（Ref. The resolution is represented by the total number of black and white stripe lines, in the unit of“TV lines”,
which are visible on TV screen.）
(a) Set the modes of the camera as follows and then take a photo:
Photography mode: AUTO
White Balance: Preset
Image quality mode: FINE
Image size: 7M
Sensitivity: ISO50
Metering system: Center-weighted
AF area selection: Center
Speed light mode: Flash cancel mode
(b) Make an inspection at the zooming position of WIDE, MIDDLE, and TELE. Set the object distance of WIDE
(about 0.6 m), MIDDLE (about 1.2m), and TELE (about 1.7 m) , and adjust so that the chart can be fully placed
within the LCD. Then mount the camera on the tripod firmly.
(c) Open the shot image with Photoshop, and magnify it by zooming to 100% for checks.
(d) Check if the resolution marked in 4 red circles each for the center and the peripheral 4 corners of the frame can be
visible in black and white.
TE high-resolution chart (4:3 reflect) (J63079)
- A20 ･ E7900 -
VAA46003-R.3659.A
CCD
・Set the LPF mask (642).
・Set the LPF (8).
・Set the CCD rubber (609).
・Install the CCD PCB and tighten the two screws (813).
The broken-corner section is at the top as viewed
from the CCD side.
Setting direction of the LPF mask (624)
Screws (813)
CCD PCB
CCD rubber (609)
LPF(8)
LPF mask (642)
- A21 ･ E7900 -
Setting direction of LPF (8)
Lens unit
CCD
side
side
VAA46003-R.3659.A
FINDER UNIT
・Turn the finder in the arrow A direction until it stops and then return it a little where a hole exists. Insert the pin tool
(J61201) into the hole.
・Make sure that the lens is in the stowed position.
・Move the lens barrel unit in the arrow "B" direction.
・Install the finder unit (B501) into the lens unit and tighten the three screws (815).
・Remove the pin tool (J61201) from the finder unit.
・Set the Light-shiled sponge (741).
Turn the finder in the counterclockwise to
its limit, return it a little and insert the pin
tool (J61201) into the hole.
Pin tool (J61201)
Finder cam
A
Screws (815)
Finder unit (B501)
B
Lens barrel unit
- A22 ･ E7900 -
Light-shiled sponge (741)
VAA46003-R.3659.A
Assembly of battery chamber
・Set the battery spring (350).
・Set the battery case unit (B341).
・Tighten the two screws (802).
・Set the lug plate (395).
・Set the SD case unit (B351) and lock it.
・Tighten the two screws (802).
SD case unit (B351)
Battery chamber
Screws (802)
lug plate (395)
Battery spring (350)
Battery case unit (B341)
Screws (802)
- A23 ･ E7900 -
VAA46003-R.3659.A
Lens barrel unit
・Set the battery chamber unit (B10345) and tighten the screw (803).
・Set the chassis (151) and tighten the two screws (801).
・Tighten the screw (803).
Screw (803)
Chassis (151)
Screws (801)
Screw (803)
Battery chamber unit (B10345)
Main PCB
・Set the lug plate (397).
・Install the main PCB (B1001).
・Set the lug plate (392).
・Tighten the two screws (818).
FPC
・Tighten the screw (803).
Lug plate (392)
・ Perform soldering.
・ Set the FPC.
Screws (818).
はんだ
Main PCB (B1001)
Screw (803)
- A24 ･ E7900 -
Lug plate (397)
VAA46003-R.3659.A
DC/DC PCB
・Set the strap eyelet (381).
・Set the DC/DC PCB onto the main PCB connector..
・Tighten the two screws (816).
Screws (816)
・Solder the armature.
Armature
Strap eyelet (381)
DC/DC PCB
Position of the main PCB connector (Rear surface)
- A25 ･ E7900 -
VAA46003-R.3659.A
SB PCB
1. Installation of condenser/microphone/SB PCB
・Install the SB PCB and tighten the two screws (804).
・Adhere the SB insulating sheet (711).
・Set the microphone (1023) and insert the connector. (Fig. 1)
・Set the condenser.
Condenser.
Cord arranging tape (716)
SB PCB
SB insulating sheet (711)
Screws (804)
Microphone (1023)
Screws (804)
2. Setting of harness
・Set the SB control harness (1013).
Connector
SB control harness (1013)
（Fig.1）
3. Setting of cords/tapes
・Solder the lead wire [black] and the lead wire [red].
Lead wire [black] and the lead wire [red]
・Adhere the cord arranging tape (716).
Cord arranging tape (717)
・Adhere the cord arranging tape (717).
Microphone (1023)
Cord arranging tape (716)
Cord arranging tape (717)
- A26 ･ E7900 -
VAA46003-R.3659.A
LCD
・Set the chassis (152).
・Set the lug plates (394).
・Set the FPC and the connector. Then, set the LCD.
LCD
Chassis (152)
FPC
Connector
・Tighten the three screws (815).
LCD
Screw (815)
Lug plate (394)
Screw (815)
（Fig.1）
- A27 ･ E7900 -
VAA46003-R.3659.A
Top FPC
・Set the FPC(A) onto the connector
・Tighten the screw (801).
Screw (812)
・Tighten the two screws (812).
Top FPC
FPC (A)
Screw (801)
・Fit the FPC(B) to the bosses (2 place) and adhere it.
FPC (B)
- A28 ･ E7900 -
VAA46003-R.3659.A
RELEASE SWITCH UNIT
・ Set the FPC.
・Install the release SW unit (1016) by setting into the strap (B124).
・ Adhere the extra FPC with tape.
Release SW unit (1016)
Strap (B124).
Tape
FPC
- A29 ･ E7900 -
VAA46003-R.3659.A
Front cover
1. Setting of front cover/fixed barrel curtain
・Set the fixed barrel curtain (618).
・Set the front cover (B101).
Barrel curtain (618)
・Tighten the two screws (811).
・Tighten the two screws (808).
Screw (811)
- A30 ･ E7900 -
Screw (808)
VAA46003-R.3659.A
2. Setting of tripod socket
・Set the tripod socket (B371).
・Tighten the two screws (810).
Screws (810)
Tripod socket (B371)
3. Setting of strap (at the battery cord cover side)
4. Setting of strap (at the grip side)
・Set the USB cover (361) onto the strap (125).
・ Set the battery cord cover (362) onto the strap
・Set the strap (125).
(126).
・Set the strap (126).
Strap (126)
Strap (125)
Battery cord cover (362)
USB cover (361)
- A31 ･ E7900 -
VAA46003-R.3659.A
Assembly of rear cover
・Set the multi-selector (242).
・Fit the switch rubber (244) to the convex section and set it.
・Set the determining button (241).
・Set the speaker (1025) with the cord facing downward.
・Set the determining button spring (245).
・Set the rear SW unit (1018).
・Fit the rear SW unit (1018) to the two convex sections.
・Tighten the six screws (819).
・Adhere the rear FPC insulating seal (719).
Speaker (1025)
Switch rubber (244)
Determining button (241)
Multi-selector (242)
Screw (819)
Determining button spring (245)
Rear SW unit (1018)
Rear FPC insulating seal (719)
Screw (819)
- A32 ･ E7900 -
VAA46003-R.3659.A
Installation of rear cover
1. Installation of rear cover
・Set the connector.
・Insert the FPC.
・Set the rear cover.
FPC
Rear cover
Connector
- A33 ･ E7900 -
VAA46003-R.3659.A
2. Attaching of screws
・Tighten the two screws (809).
・Tighten the two screws (810).
Screws (810)
Screws (809)
・Tighten the two screws (811).
Screws (811)
- A34 ･ E7900 -
VAA46003-R.3659.A
ADJUSTMENT
1. Equipment
IBM compatible PC/AT • AC adapter EH-62B • USB cable ( UC-E6)
2. Servicing tools
• Pattern box • Color meter
• Luminance meter
• Siemens star chart
• Calibration software (J65071)
• Adjustment collimator (J63090) or Adjustment firmware
3. Adjustment items and order
Adjustment after replacing the CP-1 PCB of RP
1. Writing of the initial image data
2. Firmware up
3. Lens adjustment
4. AWB adjustment
5. CCD white dot defect compensation
6. CCD black dot/white dot defect adjustment
7. USB storage information registration
Note) If replacing the lens, CCD, optical filter, it is necessary to perform the above 3-7 adjustments again. 4-6
adjustments should be made in the above order.
- A35 ･ E7900 -
4. Initial image data writing and Firmware upgrading
VAA46003-R.3659.A
Write the data of initial images, and go on to upgrade the firmware.
Device
・ AC adapter (EH-62B)　・ Upgrading SD card X 1　[How to create an upgrading SD card]
1) Format SD card on PC.
2) Create a folder named "firmware" in the root directory of the SD card.
3) Copy "firmware.bin" into the created folder.
4) Copy "nanddat.bin" into the root directory of the same SD card.
Note) When only firmware upgrading is performed without replacing CP-1 PCB, copying "nanddat.bin" into the SD card is
NOT necessary.
Procedure　・ Turn the camera OFF and connect the AC adapter.
・ Insert the upgrading SD card into camera.
・ Set the mode dial to "SETUP" and turn power ON.　・ Highlight and select "Firmware version" to display the menu for data-writing of initial images. (Fig.1)
(Fig.1)
・ Select "Yes", and press the decision button to carry out data-writing of initial images. (Fig.2)
Note: Do NOT turn power OFF during upgrading.　(Fig.2)
- A36 ･ E7900 -
・ When the data writing is completed, the menu for upgrading will be displayed. (Fig.3)
VAA46003-R.3659.A
(Fig.3)
・ Select "Yes", and press the decision button to carry out upgrading. (Fig.4)
Note: Do NOT turn power OFF during upgrading.　(Fig.4)
・ When the screen indicates the completion of upgrading, turn power OFF and remove the SD card. (Fig.5)
・ Turn power ON, and check the version by "Firmware version" on the menu.　・ Turn power OFF to end.
(Fig.5)
- A37 ･ E7900 -
VAA46003-R.3659.A
5. Setup
1) System requirements
• Windows® 98 or Me, 2000, XP
• IBM-compatible PC/AT with Pentium or higher processor
• CD-ROM drive
• 3.5-inch 2HD diskette drive
• USB port
• 40 MB or more RAM
• Hard disk drive with 15 MB or more memory space
• VGA or SVGA monitor with 256 or more color display
2) Installing calibration software
• Insert the calibration software installation diskette into the diskette drive.
• Open Explorer.
• Copy "DscCalDi.exe, Camapi32.dll" folder of the floppy disk drive in any folder on the hard disk.
6. Installing USB driver
If the USB driver is necessary, install Nikon View via CD-ROM packed with the camera.
- A38 ･ E7900 -
VAA46003-R.3659.A
7. Pattern box
Before using the pattern box, turn its power on to carry out "Aging" approx. 30 minutes: the color temperature should
be 3100 ± 20K by the adjustment with the color meter, and the luminance should be 900 ± 20cd/m2 by the adjustment
with the luminance meter. When using the pattern box and for a while after its power turns off, the lamp and its
surroundings are subject to high temperatures, so care should be taken when handling.
• Procedure for correcting Pattern Box
Note: Be sure to perform the aging correction.
1) Measure the measuring point (center of diffusion plate) with the Color Meter (J63081).
2) Adjust the pattern box so that the color temperature should be 3100 ± 20K by using "VR for adjustment of the color
temperature".
3) Measure the center of the diffusion plate with the Luminance Meter BM-3000 (J63068).
4) Adjust the pattern box so that the luminance should be 900 ± 20cd/m2by using "Knob for luminance adjustment".
5) Repeat from 1) to 4) So that the color temperature should be 3100 ± 20k and luminance should be 900 ± 20cd/m2
Knob for luminance
adjustment
VR for adjustment of
the color temperature
Iris unit
Power switch
Diffusion plate
Area to be measured
8. Adjustments required when parts are replaced
Lens Adj.
AWB
CCD
Defects
USB
Firmware
up
Initial image
data
Lens Unit
○
○
○
×
×
×
Optical filter
○
○
○
×
×
×
CCD
○
○
○
×
×
×
CP-1
○
○
○
○
○
○
○ Adjustment is necessary. × Adjustment is not necessary.
- A39 ･ E7900 -
VAA46003-R.3659.A
9. Connecting the camera to the computer
1) Insert the camera connector of USB cable in the notch of the camera’s USB port.
2) Connect the cable to the USB port on PC.
Supply
電源はthe
ACpower
アダ
through
the ACか
プ タ EH-62B
adapter
ら 供 給(EH-62B).
してく
ださい。
To USB port
USB Cable (UC-E6)
10. Calibration software
・ Turn on the power switch of the camera.
・ When the calibration software starts, the following is displayed on the PC monitor.
- A40 ･ E7900 -
VAA46003-R.3659.A
11. Lens adjustment
※ For the lens adjustment, choose either the infinity adjustment with the collimator or the 1.5-m adjustment with
the adjustment firmware. (However, in case of 1.5-m adjustment, the focus may not be sharp at infinity.)
11-1. Infinity adjustment
[Preparations]
• Turn the power switch of the adjustment collimator (C-DSC) J63090 to on.
• Turn the power switch of the camera to on.
• Siemens star chart
• POWER switch of camera: ON
[Conditions]
• Set the adjustment collimator and the camera (front surface of lens) at the nearest distance between them.
[How to]
• Double-click on "DscCa1Di.exe".
• Set the siemens star chart so that it comes center of the screen by checking through the viewfinder.
• Click "Focus", then "Yes".
• Lens adjustment value will appear on the screen.
Judgment standard: xd00 = 0 ＋ 87, xd03 = 0 ＋ 87, xd06 = 0 ＋ 87, xd08 = 0 ＋ 87
xd00 = 0 － 47, xd03 = 0 － 47, xd06 = 0 － 47, xd08 = 0 － 47
• Click "OK".
"Yes"
カメラ
Camera
Adjustment
collimator
調整用コリメータ
(Siemens star chart built-in)
（ジーメンスターチャート内蔵）
Result of adjustment
- A41 ･ E7900 -
VAA46003-R.3659.A
11-2. 1.5-m Adjustment
※ Before performing the 1.5-m adjustment in this machine, write the adjustment firmware on the camera. After
adjustment, be sure to write the product firmware.
Procedure for setting Adjustment firmware
1) Save the adjustment firmware and the product firmware in any folder.
2) Start up "DscCa1Di.exe" and click on "Firmware" button on the main menu to write the adjustment firmware.
(If the camera is activated after completing writing the adjustment firmware, "SERVICE" is indicated in red letters
on LCD panel.)
3) Follow the instructions of the below [How-to].
4) Start "DscCaDi140" and click "Firmware" on the main menu to write the product firmware.
[Preparations]
• Set the Siemens star chart.
• Turn the power switch of the camera to on.
[Conditions]
• The siemens star chart should be A3-size or larger (Copy and enlarge A4-size siemens chart included in the
service manual for the usage.)
• Illumination over the object should be 400 lux ± 10%
• Set the siemens star chart and the camera (front surface of lens) at 150 cm ± 3 cm distance between them.
[How-to]
• Double click on "DscCa1Di.exe".
• Set the siemens star chart so that it comes center of the screen by checking through the viewfinder.
• Click "Focus" then "Yes".
• Lens adjustment values will appear on the screen.
Judgment standard: xd00 = 0 ＋ 87, xd03 = 0 ＋ 87, xd06 = 0 ＋ 87, xd08 = 0 ＋ 87
xd00 = 0 － 47, xd03 = 0 － 47, xd06 = 0 － 47, xd08 = 0 － 47
• Click "OK".
"Yes"
カメラ
Camera
150cm±3cm
Siemens
star chart
ジーメンス
スターチャート
- A42 ･ E7900 -
Result of adjustment
VAA46003-R.3659.A
12. AWB adjustment
[Preparations]
• Pattern Box(Color temperature: 3100 ± 20K, Luminance: 900 ± 20cd/m2)
[Conditions]
• Set the pattern box and camera (lens front) at "0cm" distance between them.
Note) Do not allow outside light to enter in.
[How to]
• Double-click on "DscCa1Di.exe".
• Click "AWB", then "Yes".
• AWB adjustment values will appear on the screen.
Judgment standard: CHECK=128 ± 2, 128 ± 2, 130 ± 40
• Click "OK".
"Yes"
Result of adjustment
カメラ
Camera
Pattern Box
バターンボックス
・ Input“1”into“Cal_Data”and click“OK”.
・ Input“22”into“Cal_Mode”in the adjustment conditions status and click“OK”.
- A43 ･ E7900 -
VAA46003-R.3659.A
13. CCD white dot defect compensation
[Conditions]
• With the lens shutter being closed, read the defect of CCD pixels. Then, make the correction data and rewrite the
data by the following procedure.
Correct the upper level of defective 2000 pixels from the brightest number of CCD pixels..
[How to]
• Double-click on "DscCa1Di.exe".
• Select "CCD Defect" from Test menu of Calibration Software and click the "OK". Refer to FIG-1.
• After adjustment, the adjustment value will appear on the screen. Refer to FIG-2.
<FIG-2>
CCD Defect
CCD Black
<FIG-1>
14. CCD black dot/white dot defect adjustment
[Conditions]
• Fix the camera so that only the white part of the pattern box should be displayed on the screen.
(Do not allow outside light to enter in as much as possible.)
• With the lens shutter being opend, read the defect (black dots) of CCD pixels. Then, make the correction data and
rewrite the data by the following procedure.
Correct the upper level of defective 48 pixels (black dots in bright place) of CCD pixels.
[How to]
• Double-click on "DscCa1Di.exe".
• Select "CCD Black" from Test menu of Calibration Software and click "OK". Refer to FIG-1.
• After adjustment, the adjustment value will appear on the screen. Refer to FIG-3.
< FIG-3 >
カメラ
Camera
バターンボックス
Pattern Box
- A44 ･ E7900 -
VAA46003-R.3659.A
15. USB storage information registration
USB storage data is important when the camera is connected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not been saved, the USB specifications will not be satisfied,
so always check and save the USB storage data.
[How to]
• Connect the camera to a computer.
• Double-click on the "DscCa1Di.exe".
• Click on the "Get" button in the USB storage window and check the USB storage data.
VID: NIKON
PID: NIKON DSC E7900
Serial:
Rev. : 1.00
• Check the“Serial”in the above USB storage data. If the displayed value is different from the serial number
printed on the base of the camera, enter the number on the base of the camera, and click the "Set" button.
• Check VID and Rev. entries in the USB storage data. If any of them are different from the values in 3. above,
enter the details of 3. and click the "Set" button.
- A45 ･ E7900 -
VAA46003-R.3659.A
- E1･ E7900 -
VAA46003-R.3659.A
- E2･ E7900 -
VAA46003-R.3659.A
- E3･ E7900 -
VAA46003-R.3659.A
- E4･ E7900 -
VAA46003-R.3659.A
- E5･ E7900 -
VAA46003-R.3659.A
- E6･ E7900 -
VAA46003-R.3659.A
- E7･ E7900 -
VAA46003-R.3659.A
総合結線図
OVERALL WIRING
DMA
CN143
30
CN101
GND
SBVDD
SBCHG
SBTRG
SBMON
CN501
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
GND
GND
GND
BL_CA
BL_AN
+12.0V(L)
GND
BLON
LCDON2
LCDON
PAON
PON
VDD5
-7V(A)
+15V(A)
VDD3
VDD3
VDD1.4
VDD1.4
GND
GND
GND
UNREG
BAT-T
VM5.1V
VM5.1V
VM5.1V
MGND
MGND
MGND
JW501 BAT+
JW502 BAT-
BATTERY
JW503 BATT
JW541 +
JW542 -
STROBO
1
2
3
4
5
02
GND
MIC
2
SPSP+
2
CN181
1
MIC
SYA
14
CN302
23
GND
GND
GND
LCD_CA
LCD_AN
+12.0V(L)
GND
BLON
LCDON2
LCDON
PAON
PON
VDD5
-7V(A)
+15V(A)
VDD3
VDD3
VDD1.4
VDD1.4
GND
GND
GND
UNREG
BAT-T
VM5.1V
VM5.1V
VM5.1V
MGND
MGND
MGND
DMA
02
CN182
1
22
SYA
2
21
3
20
4
19
5
18
6
17
CN102
DMA
7
16
8
15
CAB
9
14
10
13
11
12
12
11
SCAN IN 3D
SCAN IN 2D
SCAN OUT 3
SCAN IN 0C
SCAN IN 3C
SCAN IN 1C
SCAN OUT 2
SCAN IN 2C
SCAN IN 3B
SCAN OUT 1
SCAN OUT 3
SCAN IN 0D
SCAN IN 4B
SCAN IN 2B
LENS
10
DMA
13
9
5
14
8
CN301
7
17
6
1
5
2
4
3
3
23
4
2
ZMIB
ZMIA
ZKS0
ZKS1
ZKP1
D3.3V
SH2
AP1
AP2
SH1
ZEP1
D3.3V
ZES
FKP1
D3.3V
FKS
NC(GND)
NC(LBTMP)
NC(D3.3V)
AF2A
AF1A
AF2B
AF1B
(DMA)
(CAA)
(SYA)
(VFA)
(CAB)
5
1
CN951
DMA
CP1
6
1
7
2
8
3
9
4
10
5
DMA
11
6
12
7
13
8
14
-1
NC
AF HOJYO_K
SB.LED_K
VDD5
AF.LED_K
SCAN IN 0A
SCAN IN 1A
SCAN IN 2A
SCAN IN 3A
SCAN OUT 0
NC
AL3.2V
PW.LED G_K
PW_ON
GND
S1
SHUTTER
VIDEO
-2
15
&
-3
GND
GND
GND
GND
GND
GND
USB_VDD
USB D(-)
GND
USB D(+)
ZAV_JACK
AUDIO_OUT
VIDEO_OUT
GND
16
USB
-4
CN110
17
-5
PW1
12
33
VFA
-6
1
2
3
4
5
6
7
8
9
10
11
12
13
GND
WP
CARD/WP
CARD
DATA2
DATA1
DATA0
VSS
CLOCK
VDD
VSS
COMMAND
DATA3
2
DMA
CN103
LCD_AN
LCD_CA
CN171
1
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
9
10
8
7
6
5
4
3
2
SD
VSS
VVCOM
COMOUT
C1+
C1VGL
C2C2+
VDC1
VGH
VDD
COMDC
VSH
VBC
D00
D01
D02
D03
D04
D05
D06
D07
CLK
HSYNC
VSYNC
SCK
DI
CS
BLON
POCB
TEST
VSS
VCOM
1
LCD PANEL
W1-41800/SWQ14-WNK
RELEASE
UNIT
1
SPEAKER
BACK SW
UNIT
MODEL: E7900
OVERALL WIRING
- Ｅ8･ E7900 -
VAA46003-R.3659.A
CP1(DMA) 回路図
CP1 (DMA) CIRCUIT DIAGRAM
DMA
OM/ORTR71Z
3
SBCHG
4
SBTRG
5
SBMON
Q1001
RT1P237T
VDD3
D1-41800/SWQ14-WNK
VDD5
1AV4J11B7110M
1AV4J10UC052G
TO STROBO
OM/ORZJ10UC050GAZ
306
307
A3
308
A2
309
A1
310
311
VDD1.4
312
19
C1039
1;B
C1040
1;B
322
323
324
D7
325
D6
1608
H=1
328
D3
329
D2
330
D1
C1901
4.7;B
331
D0
332
333
1608
H=1
334
335
336
337
CN103
1
USBD+
2
USBD-
340
C1009
68P;CH
1AV4J10QL022G
338
339
OM/ORSK02V052AZ
TO LCD
341
C1010
68P;CH
342
343
344
(4M+32M)
345
346
TCK
C1026
4.7;B
1608
CB103
1;B
R1060
1.2K;1/16D
R1067
100;1/16D
1608
CB106
1;B
90
ZSCE
SCLE
SALE
MODE1
MODE2
ZSRE
ZSWE
CRZB
FOE
SDWP
CDET
FCW
SDCLK
CMD
FCLK
FD2
FD3
FD1
FD0
CD7
CD6
CD5
CD4
CD3
CD2
CD1
FPI
CD0
ZRESET
ZVMUTE
ZPULSE2
ZPULSE1
BL_ON
CLK2ON
COMREQ
SELF_CTL
LCDCK
LCDEN
LCDSD
LCDD6
LCDD7
LCDVD
LCDD5
LCDHD
LCDD4
LCDD3
LCDD1
LCDD2
AFLED_CTL
USBSET
R1002
47;1/16J
217
216
215
214
213
212
211
210
209
208
207
206
205
204
203
202
95
395
396
98
397
99
CCD PLL
398
100
399
101
400
102
103
104
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
MODE4
VSS
18
19
20
21
22
23
24
25
26
27
A0
A1
A2
A3
VCC
TSOP
256M
CCDCK
54
53
52
51
50
49
48
47
46
45
44
43
42
C1003
0.1;B
SD15
SD14
SD13
39
38
37
36
35
34
33
32
31
30
29
SD17
SD18
SD12
SD19
SD11
SD20
SD10
SD21
SD9
SD22
SD8
41
40
SD16
SD23
DQM2
DQM1
ZRWE
CKRAM
ZCAS
CKRE
ZRAS
SA12
SA11
ZRCS
SA14
SA9
SA13
SA8
SA10
SA7
SA0
SA6
SA1
SA5
SA2
SA4
SA3
28
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
VCC
DQ0
VCCQ
DQ1
DQ2
VSSQ
DQ3
DQ4
VCCQ
DQ5
DQ6
VSSQ
DQ7
VCC
LDQM
/WE
/CAS
/RAS
/CS
BS0
BS1
22
23
24
25
26
A0
A1
A2
A3
VCC
TSOP
256M
VSS
DQ15
VSSQ
DQ14
DQ13
VCCQ
DQ12
DQ11
VSSQ
DQ10
DQ9
VCCQ
DQ8
VSS
NC
UDQM
CLK
CKE
A12
A11
A9
A8
A7
A6
A5
A4
VSS
SDRAM
53
52
51
SBTRG
ZIN2
ZIN1
ZIN1
ZIN2
50
49
48
47
46
45
44
43
42
XDWP
SD29
SD28
39
38
37
36
35
34
33
32
31
30
29
28
SD25
SD1
SD2
SD24
VDD3
DQM3
X1101
28.63158MHz
1AV4V10B6870G
CKRAM
CKRE
SA12
SA11
SA9
SA8
SA7
4
3
1
2
R1111
470;1/16J
SA6
SA5
SA4
AVDD
VDD1
AVDD
VDD1
AVSS
VSS1
CLK2ON
XIN
XOUT
6
7
8
9
10
CLK1OUT
IC111
BU2394KN
QBU2394KN---P
FPI
SD4
SD5
LCDD7
SD6
LCDD6
SD7
LCDD5
SD8
LCDD7
LCDD6
SD10
LCDD3
SD11
LCDD2
SD12
LCDD4
LCDD3
LCDD2
LCDD1
SD13
SD14
LCDD0
SD15
LCDEN
SD16
LCDD1
LCDD0
LCDEN
LCDCK
SD17
LCDSD
SD18
LCDVD
SD19
LCDHD
SD20
LCDCK
LCDSD
LCDVD
LCDHD
LCDON2
LCDON2
SD21
LMCLK
SD22
VDD3
SD23
+12.0V(L)
SD24
TO VFA
LCDD5
LCDD4
SD9
LMCLK
VDD3
+12.0V(L)
SD25
SD26
VDD3
SD27
SD28
SD29
SD30
SD31
DQM0
SREQ
DQM1
SDI
DQM2
SREQ
SDI
SDO
SCK
ZRWE
SCK
MRST
MRST
SA0
COMREQ
SA1
COMREQ
USBCNT
SA2
USBCNT
ZAVJACK
ZAVJACK
SBCHG
SA3
SA4
SBMON
SA5
ZCARD
SA6
UNREG
SA7
SBCHG
SBMON
ZCARD
UNREG
BAT_T
BAT_T
LCDON
SA8
SA9
SA10
PAON
SA11
PAON2
SA12
VDD3
SA13
VM5.1V
PON
PAON
PAON2
VDD3
VM5.1V
LCDON2
SA14
LCDON2
BEEP
ZRAS
BEEP
SBVDD_CTL2
ZRCS
SBVDD_CTL2
AFLED_CTL
CKRE
R1005
22;1/16J
LCDON
PON
ZCAS
AFLED_CTL
SELF_CTL
CKRAM
TO SYA
SDO
DQM3
SELF_CTL
VDD5
VDD5
SDI
SCK
SDO
SREQ
Q1305
NSBC114EPD
102
101
VDD3
OM/ORTR56Z
6
5
4
1
2
3
100
CLK2ON
R1311
1.5K;1/16J
RB106
100
RB105
100
C1301
1;B
100
RB104
4
3
5
2
6
1
USB-
USBD-
RB132
27
USBD+
USB+
TGHD
TGVD
XSG1A
XSG1B
XSG2A
XSG2B
XSG2C
XSG3A
XSG3B
XVH
XVS
XV2
XV1
XV4
XV3
3.3K;1/16D
R1813
VA134
AVR-M1608C120MT
C1825
0.1;B
5
4
3
2
9
AUDCK
10
26
11
25
C1821
0.1;B
C1101
0.01;B
ASICAOUT
27
LOGIC
0dB
+42.5dB
30K
REG
LPF
0dB
13
14
+6.5dB
15K
LABIAS
15
0.1;B
C1822
16
24
23
ALC
+6.5dB
18
19
20
-6
02
-5
-4
USBUSBDET
1AV4J10UC023G
TO MIC
-3
USB+
22
C1828
0.1;B
R1814
200;1/16J
C1831
4.7;B
R1815
2K;1/16D
C1810
C1829
0.022;B
0.022;B
1
2
CN182
SP+
SP-
-1
8
BK1608LM751-T
7
1608
R1301
220K;1/16J
1608
-2
L1302
BK1608LM751-T
AUDIOOUT
L1303
6
5
VIDEOOUT
02
L1304
BK1608LM751-T
4
3
1608
2
1AV4J10UC024G
1
TO SPEAKER
QMM1613LNLE-G
IC182
+7dB
17
CN181
MIC
GND
1608
ZAVJACK
28
EVR
12
2
QBH6412KN---P
AUDSD
C1820
1
BH6412KN
1
0dB
0dB
LINE
MUTE
CTRL
8
ASICAIN
20 19 18 17 16
ZPULSE1
FPI
SD3
AUDIO
IC181
C1827
1;B
SPBIAS
0.1;B
L1101
BK1005LL241-T
ZPULSE2
ZPULSE1
0.1;B
C1806
6
BEEP
AUDLD
R1104
150;1/16J
SD26
ZIN1
ZPULSE2
SD0
USBSET
L1103
BK1005LL241-T
SD27
41
40
135M
ZIN2
ZRESET
NSBC144ED
RB103
100
XV6
XV5
XV7
XV8
ADCK
7
R1103
47;1/16J
MODE1
ZRESET
USBDET
R1806
180K;1/16D
SD31
L1102
BK1005LL680-T
MODE2
MODE1
TO CN110
C1006
0.1;B
SD30
MODE3
MODE2
AUDCK
A_VDD3
A_VDD1.2
C1807
0.1;B
54
MODE4
MODE3
AUDLD
USBCNT
AUDIOOUT
QW9825G6CH75N
1
2
IIN1
MODE4
CCDSD
AUDSD
Q1301
CB104
1;B
C
IC104
W9825G6CH-75
27
SDRAM
B
FCW
IIN2
IIN1
CCDEN
H=1.0
VSS
DQ15
VSSQ
DQ14
DQ13
VCCQ
DQ12
DQ11
VSSQ
DQ10
DQ9
VCCQ
DQ8
VSS
NC
UDQM
CLK
CKE
A12
A11
A9
A8
A7
A6
A5
A4
VSS
L1012
BK1005LL241-T
FCLK
FCW
IIN2
SIN2
21
C1830
4.7;B
MM1613LNLE
4
OUT
3.0V
REG
1608
5
3
IN
VDD3
IC152
2
ON/OFF
REGULATOR
Hi-ON
CT0J470MHVANG
1
ZVMUTE
VIDEOOUT
R1526
75;1/16D
C1513
47;6.3-T
C1512
22;4-T
CT0G220MJSANG
TO USB&VIDEO
GND
GND
GND
GND
GND
GND
USB_VDD
USB D(-)
GND
USB D(+)
ZAV_JACK
AUDIO_OUT
VIDEO_OUT
GND
21
CN110
1AV4J11B5670G
C1504
0.1;B
VOUT
H=1.4
CB181
1;B
16
17
VCC
DQ0
VCCQ
DQ1
DQ2
VSSQ
DQ3
DQ4
VCCQ
DQ5
DQ6
VSSQ
DQ7
VCC
LDQM
/WE
/CAS
/RAS
/CS
BS0
BS1
L1011
BK1005LL241-T
FOE
FCLK
SIN1
107
E
SIN1
FOE
IIN1
106
R1054
270;1/16D
SIN2
SIN1
IIN2
220
TO CAB(LENS)
PICTL
SIN2
PICTL
RB107
VDD3
VM5.1V
PICTL
105
R1050
3.3;1/16J
VDD3
VM5.1V
MODE3
SCK 108
SDO 107
ZSREQ 106
CSYNC 105
TGHD 104
TGVD 103
GPOF0
(BLCK)
97
E
CDET
GPO
C29 200
VSS 199
GPOC30 198
GPOC31 197
GPOC32 196
GPOC33 195
GPOC34 194
GPOC35 193
GPOC36 192
GPOC37 191
GPOC38 190
GPOC39 189
GPOC40 188
GPOC41 187
VDDE 186
GPOC42 185
GPOC43 184
GPOC44 183
GPOC45 182
SD0 181
SD1 180
SD2 179
SD3 178
SD4 177
VSS 176
VDDE 175
SD5 174
SD6 173
SD7 172
SD8 171
SD9 170
SD10 169
SD11 168
SD12 167
SD13 166
SD14 165
SD15 164
SD16 163
VSS 162
SD17 161
SD18 160
SD19 159
SD20 158
VSS 157
SD21 156
SD22 155
SD23 154
SD24 153
SD25 152
SD26 151
VDDI 150
SD27 149
SD28 148
SD29 147
SD30 146
SD31 145
DQM0 144
DQM1 143
DQM2 142
VDDE 141
DQM3 140
ZRWE 139
SA0 138
SA1 137
SA2 136
VSS 135
VDDI 134
SA3 133
SA4 132
SA5 131
SA6 130
SA7 129
VDDE 128
VSS 127
SA8 126
SA9 125
SA10 124
SA11 123
SA12 122
VSS 121
SA13 120
SA14 119
ZCAS 118
ZRAS 117
ZRCE 116
CKRE 115
VSS 114
SRCLK 113
VSS 112
VDDE 111
SDI 110
VSS 109
394
96
C
B
201
1005
218
RB142
10K
A21
ZCS0
A20
ZFRD
ZFWR
A19
A18
A17
A16
A15
A14
A13
A11
A12
R1004
10K;1/16J
219
C1815
1;B
15
SA3
220
1608
14
SA2
221
C1826
4.7;B
13
SA13
222
1608
11
12
SA10
223
C1803
10
SA14
224
4.7;B 1608
9
SA1
225
4.7;B
8
SA0
226
C1824
6
7
ZRCS
227
1608
5
ZRAS
228
R1812
470K;1/16J
4
ZCAS
229
393
11 12 13 14 15
3
ZRWE
230
392
94
QW9825G6CH75N
1
DQM0
231
391
93
IC103
W9825G6CH-75
2
SD7
232
108
L1003
FBMH1608HM102-T
SD5
233
390
92
VDD3
SD6
234
389
91
Q1501
2SA2029-R
SD4
235
388
R1509
1.5K;1/16J
SD3
236
ASIC
FA0152
SD2
237
387
89
PROGRAM FLASH
SD1
238
386
88
A_VDD3
SD0
239
C1823 4.7;B
78
240
RB102
100
77
241
RB101
100
76
ADCK
SUBGT
242
XSUB
75
CCDCK
243
SUBGT
74
244
XV9
73
245
XV10
72
246
27K;1/16D
71
CCDSD
247
36K;1/16D
R1811
70
TGVD
CCDEN
NAND
128M
248
AD0
69
249
AD1
TGHD
68
250
AD2
67
251
AD3
66
VDD3
252
AD4
65
-7.5V(A)
+3.45V(A)
253
R1801
64
254
AD5
63
385
87
255
AD10
62
384
86
256
AD6
60
61
383
85
257
AD7
59
382
84
258
AD11
58
381
83
259
AD8
57
380
82
260
AD9
55
56
377
379
81
261
RB100
10K
54
376
378
80
262
TXD0
53
374
375
79
263
R1018
68;1/16J
52
RB144
100
ZSWE
XDWP
CD0
CD1
CD2
CD3
CD4
CD5
CD6
CD7
373
R1059
1.2K;1/16D
A17
25
372
2.4K;1/16D
264
QXXAGQ1200BEN
1608
51
370
R1058
265
R1012
1.2K;1/16D
49
50
27
26
368
371
R1055
2.7K;1/16D
266
C1013
0.022;B
ADCK
SUBGT
24
D15
28
367
CLK2OUT
CCDCK
A16
29
366
369
D7
267
FS1
TGVD
CCDSD
+15V(A)
23
D14
30
364
365
VSS2
TGHD
CCDEN
AD11
A15
RB143
100
D6
31
268
FS2
VDD3
AD9
AD10
SALE
22
D13
32
363
CB107
1;B
ASICAOUT
220P;CH
+15V(A)
-7.5V(A)
+3.45V(A)
AD8
21
D5
33
4
1608
AD9
AD11
AD7
20
A13
34
OUT
REGULATOR
Hi-ON
269
SX8M_ASIC
VDD2
AD8
AD10
CRZB
ZSRE
ZSCE
SCLE
AD3
AD6
19
D12
270
FS3
AD7
XSG1A
AD5
18
A14
XSG1B
AD4
17
A12
D4
35
362
REFCLK
AD6
XSG2A
AD2
A9
A10
A11
XSG2B
AD1
16
36
2
3
D11
37
271
AVDD
YOUT
AVSS
AVSS
VREFC
VRC
AVDD
UOUT
VOUT
VSS
VDDI
PSEL2
PSEL1
PSEL0
TEST1
TEST0
VDP
VDDI
VSS
CKIN0
VDDE
ZRST
VSS
VDDI
VDDE
XIN
VSS
XOUT
AVDE1
AVSE1
VCI
CPO
AVDE0
AVSE0
AVD1
AVS1
CCDVDDI
CCDVDDE
ADCK
CCDVSS
CCDVDDI
GPIOB0 (RXD0)
GPIOB1 (RXD1)
GPIOB2 (CTS)
GPIOB3 (BRCK)
GPOB4 (TXD0)
GPOB5 (TXD1)
GPOB6 (RTS)
HOTP
VDDE
VSS
CCD11
CCD10
CCD9
CCD8
CCD7
CCD6
VDDI
CCD5
CCD4
CCD3
CCD2
CCD1
CCD0
VDDE
VSS
GPOF29 (XV15)
GPOF28 (XV14)
GPOF27 (XV13)
GPOF26 (SUBGT)
GPOF25 (XSUB)
GPOF24 (CPDM)
GPOF23 (PBLK)
GPOF22 (CPOB)
CLKVSS
VDDI
GPOF21 (HBLK)
GPOF20 (XV10)
GPOF19 (XV9)
GPOF18 (XV8)
GPOF17 (XV7)
GPOF16 (XV6)
GPOF15 (XV5)
GPOF14 (XV4)
GPOF13 (XV3)
GPOF12 (XV2)
VDDE
VSS
GPOF11 (XV1)
GPOF10 (XVS)
(XVH)
GPOF9
GPOF8 (XSG3B)
GPOF7 (XSG3A)
GPOF6 (XSG2C)
GPOF5 (XSG2B)
GPOF4 (XSG2A)
VSS
AD5
XSG2C
15
A20
D3
38
272
ES3
IC101
MB87Q1200BGL-GE1
CB102
1;B
AD4
XSG3A
AD0
14
273
VOUT
AD3
13
ASICAIN
5
2.6V
REG
361
R1253
2.4K;1/16D
AD2
XSG3B
12
A21
1
C1077
330P;B
R1254
1.2K;1/16D
AD1
ZFWR
359
IN
274
LCD/AUDIO
18P;CH
C1007
AD0
MRST
XVH
ON/OFF
H=1.2
XSG1A
XVS
D10
39
358
360
OM/ORSO54W1FJTZ
XSG1B
11
XV1
D2
40
356
357
R1073
1.2K;1/16D
XSG2A
XV2
NOR
32M
D9
41
354
355
QTK11126CS-GG
L1004
XSG2B
9
10
D1
42
353
TDO
TK11126CSCL-G
D8
43
352
RTCK
IC106
D0
44
FBMH1608HM102-T
XSG2C
8
ZFRD
45
275
NJM2561F1-TE1
1
PS VCC
6
2
OUT GND
5
3
SAG IN
4
QNJM2561F1--P
VIDEO AMP
1608
C1515
1;B
L1501
BK1005LL241-T
VDD3
CLOCK GENERATOR
1608
XSG3A
A19
46
351
R1064
10K;1/16J
276
C1005
1;B
XSG3B
A18
XV3
7
C1201
1;B
XVH
6
R1072
360;1/16D
XVS
4
5
A8
R1062
1K;1/16J
TSEL
ZCS0
47
350
TRST
A1
48
C1004
0.1;B
XV1
3
A7
XV4
H=1.2
XV2
A6
XV5
349
TMODE
A0
CE
VSS
OE
DQ0
DQ8
DQ1
DQ9
DQ2
DQ10
DQ3
DQ11
VCC
DQ4
DQ12
DQ5
DQ13
DQ6
DQ14
DQ7
DQ15/A-1
VSS
BYTE
A16
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
OM/ORSO54W1FJTZ
XV3
2
C1002
1;B
XV4
A5
XV6
A1
A2
A3
A4
A5
A6
A7
A17
A18
RY/BY
WP/ACC
NC
RESET
WE
A20
A19
A8
A9
A10
A11
A12
A13
A14
A15
R/Bn
REn
CEn
VCCn
VSS
CLE
ALE
WEn
WPn
IO1
IO2
IO3
IO4
IO5
IO6
IO7
IO8
VSS
VCCn
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
1
A4
XV7
1608
XV5
A2
A3
XV8
C1204
1;B
XV6
XV9
348
TDI
TV00057002AAGD
QAG418008S4AN
XV10
1608
XV7
XSUB
C1001
0.1;B
XV8
10K;1/16J
XV9
2.7K;1/16J
XV10
R1404
XSUB
R1410
TO CAA
IC121
VDD3
347
TMS
C1055
4.7;B
LCD_AN
LCD_CA
277
GPOF3 (XSG1C)
GPOF2 (XSG1B)
GPOF1 (XSG1A)
VDD1.4
327
D4
C1902
4.7;B
M-GND
326
D5
278
XTAL,SEL
30
321
D8
C1043
1;B
C1044
1;B
279
TEST2
29
280
TEST1
28
281
C1103
1;B
27
320
D10
282
C1014
C1034
1;B
C1035
1;B
C1036
1;B
C1037
1;B
26
319
D9
283
R1066
10K;1/16J
VM5.1V
284
1
25
317
318
D11
285
2
BAT_T
316
D12
286
3
24
IC101
C1031
1;B
UNREG
D14
287
4
23
315
D13
288
R1065
47;1/16J
IC101
22
314
D15
289
MRST
21
A_VDD1.2
A_VDD3
313
20
290
C1905
1000P;B
305
A4
17
18
304
A5
291
5
VDD3
303
A6
292
C1102
4P;CH
16
302
A7
293
JTEST1
+15V(A)
294
C1105
4P;CH
-7.5V(A)
15
295
A9
A8
VDDI
A7
A6
A5
A4
A3
A2
A1
PLLVDD
PLLVSS
MCLK
CLKVDDE
D15
D14
D13
D12
D11
VSS
D10
D9
D8
VDDE
D7
D6
D5
D4
D3
D2
D1
D0
USBVDDI
USBVDDE
NC(AVJF2)
NC(AVJF1)
NC(RPU)
NC(FSDP)
DP
DM
NC(FSDM)
NC(AVDF1)
NC(EXTI2K)
USBVSS
PLLVSS
PLLVDD
TCK
TMS
TDI
TMODE
VDDI
VSS
TRST
TSEL
VSS
VDDE
RTCK
TDO
AVDD
VRH
VRA
AIN0
AIN1
AVSS
AVSS
VRN
AOUT
VRP
AVDD
AVSS
VREFY
VRY
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
301
A8
296
R1010
0;1/16Z
IC102
TK11134CS
QTK11134CS--J
VDD5
14
A10
A9
297
Q1432
RN2104FV
VA141
650P
4
298
R1007
0;1/16Z
PON
13
R1431
120K;1/16J
299
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
VDDI
A21
ZRE
ZWE
ZCS0
VDDE
(PPCS) GPOA0
(DACK) GPOA1
(ZCS1) GPOA2
(DREQ) GPIOA3
(ZWAIT/RDY) GPIOA4
GPOD0
GPOD1
GPOD2
GPOD3
GPOD4
GPOD5
GPOD6
VDDI
GPOD7
GPOD8
GPOD9
GPOD10
GPOD11
GPOD12
GPIOD13
GPIOD14
GPIOD15
VDDE
VDDI
TRACEPKT0
TRACEPKT1
TRACEPKT2
TRACEPKT3
PIPESTAT0
PIPESTAT1
VSS
PIPESTAT2
TRACESYNC
VDDE
TRACECLK
VDDI
GPIOE0
GPIOE1
GPIOE2
GPIOE3
GPIOE4
GPIOE5
GPIOE6
GPIOE7
GPIOE8
GPIOE9
GPIOE10
VSS
VDDI
GPIOE11
GPIOC0
GPIOC1
GPIOC2
GPIOC3
GPIOC4
GPIOC5
GPIOC6
GPIOC7
GPIOC8
GPIOC9
VDDI
GPIOC10
GPIOC11
GPIOC12
GPIOC13
GPIOC14
VDDE
GPIOC15
GPIOC16
GPIOC17
GPIOC18
GPIOC19
GPIOC20
(CDET) GPIOC21
GPIOC22
VDDI
VSS
GPIOC23
GPIOC24
GPIOC25
GPIOC26
GPOC27
GPOC28
12
VOUT
Q1431
2SC5658-R
ZCARD
300
1608
PAON
NP
13
L1001
FBMH1608HM102-T
IN
REG
3.4V
1;B
6.3V
3
OFF
9
11
VDD3
+3.45V(A)
VIN
VCONT
5
GND
CB101
LCDON
2
C1008
10
1
0.1;B
BL_ON
L1002
BK1608LL241-T
R1053
2.7K;1/16D
+12.0V(L)
7
LCDON2
8
10
R1302
10K;1/16J
VDD1.4
VDD3
02
SBVDD_CTL
A_VDD1.2
H=0.95
VDD5
5
9
7
R1405
100;1/16J
12
PAON2
4
1AV4J11SK301G
TO PW1
CN501
LCDD0
SBVDD_CTL
3
8
6
RB147
100
SDWP
2
11
5
SDCLK
SBVDD_CTL2
LMCLK
1
A_VDD3
2
1
6
4
FD2
3
5
6
NSBC144ED
CN102
GND
GND
GND
LCD_CA
LCD_AN
+12.0V(L)
GND
BLON
LCDON2
LCDON
PAON
PON
VDD5
-7V(A)
+15V(A)
VDD3
VDD3
VDD1.4
VDD1.4
GND
GND
GND
UNREG
BAT-T
VM5.1V
VM5.1V
VM5.1V
MGND
MGND
MGND
3
C1401
0.1;B
FD1
Q1002
30
2
FD3
FD0
4
CN143
DATA3
COMMAND
VSS
VDD
CLOCK
VSS
DATA0
DATA1
DATA2
CARD
CARD/WP
WP
GND
TO SD
1
CMD
R1902
10K;1/16J
2
TO CN110
1
RB141
10K
CN101
GND
SBVDD
SBCHG
SBTRG
SBMON
R1401
10K;1/16J
5
MODEL: E7900
CIRCUIT DIAGRAM: CP1(DMA)
- Ｅ9･ E7900 -
VAA46003-R.3659.A
CP1(SYA) 回路図
CP1 (SYA) CIRCUIT DIAGRAM
SYA
Y1-41800/SWQ14-WNK
VDD5
R3026
22;1/16J
R3027
22;1/16J
R3028
22;1/16J
SELF_CTL
Q3004
EMH10
R3029
150;1/16J
AFLED_CTL
6
2
5
COMREQ
3
4
SBVDD_CTL2
PAON2
R3034
2
4
3
6
5
4
LCDON
1
2
USBCNT
CL301
CL302
CL303
5
SI3C
3
4
SI3D
RB303
1K
PW_LED
SI0
PLAY
SET
LEFT
DOWN
RIGHT
UP
WIDE
TELE
SI4B
3
SI0D
R3023 0;1/16Z
R3024 0;1/16Z
4
D3005
NSDEMP11XV6T5
5
1
6
2
5
3
4
6
SI3B
7
SI2C
SI4B
8
9
SI1C
10
SI3C
11
SI0C
SDO
16
SDI
15
14
13
SCAN OUT0
BEEP
2
3
4
5
6
7
8
9
10
11
12
SI4
SI3
R3036
10K;1/16J
AVREF
SCAN IN3/TDO
R3037
10K;1/16J
SCK
17
SCAN IN4/TCLK
1
VA302
AVR-M1005C080MT
18
RB307
150K;D
SO0
SCAN OUT1
PA ON2
C3016
1;B
SO1
SCAN OUT2
COMREQ/BOT
48
BAT_T
SI
C3011
0.1;B
SO2
SCAN OUT3
47
R3005
1K;1/16J
SO
R3006
10K;1/16J
SO3
USB_CONNECT
SHUTTER
SI0
SCAN IN0
SREQ
SI1
SCAN IN1
SHUTTER
SI2
P ON
SCAN IN2
19
SCK
ZCARD
R3004
0;1/16Z
VDD3
MRST
R3017
220;1/16J
AF.LED(G)
SI4
X3001
4M00G55
SO0
SO1
3
R3020
0;1/16Z
SO2
C3013
1;B
2
TEMP_BAT
8bit MICRO PROCESSOR
R3015
470;1/16J
SB.LED(R)
2
SO3
1
SW3.2V
MENU
R3021 0;1/16Z
R3022 0;1/16Z
SI2B
SBVDD_CTL2
MN101C789-SF
20
R3011
220;1/16J
SHUTTER
R3018 1K;1/16J
1
44
QXXAG1C789SFN
21
BATSEL
R3013
330K;1/16J
X3002
1
4
2
3
1AV4V10B6900G
32.768KHz-T
Q3003
DTC144EM
ZAVJACK
R3016
2
1AV4J11SX140G
SCAN IN 2B
SCAN IN 4B
SCAN IN 0D
SCAN OUT 3
SCAN OUT 1
SCAN IN 3B
SCAN IN 2C
SCAN OUT 2
SCAN IN 1C
SCAN IN 3C
SCAN IN 0C
SCAN OUT 3
SCAN IN 2D
SCAN IN 3D
TO BACK SW UNIT
43
SW3.2 ON
22
BATTERY
UNREG
R3031
10K;1/16J
6
SI3
DEL
SB CHG
R3009
10K;1/16J
SI2
CN302
42
IC301
46
SI1
14
BACKUP_CTL
23
33K;1/16J
SI2D
41
24
VDD
CARD
RB309
10K
1
40
SB MON
45
SI1C
D3004
NSDEMP11XV6T5
SI2C
LCD ON2
R3008
100K;1/16J
VA304
4
39
BAT_OFF
CK0J105KUVBNG
3
LCD ON
RESET
5
PA ON
38
25
MMOD
6
2
37
26
1;B
CB301
1
SI0D
27
XCOUT
SI0C
28
R3019
10K;1/16J
SB.LED(R)
16
29
C3015
20P;CH
15
Q3001
DTA114EM
!
30
XCIN
D3003
NSDEMP11XV6T5
AF.LED(G)
14
TO RELEASE UNIT
SI3B
31
VDD
SI0A
13
4
R3001
1K;1/16J
SI1A
12
17
4
32
XIN
11
3
3
33
XOUT
SI2A
SI3A
3.3V
DET
2
34
VSS
10
5
1
35
AF.LED(G)
2
SI2B
SI3A
6
2.4V
DET
GND
DET
2.9V
36
5
MAIN RESET
8
BATTERY
BACKUP
6
PW_LED
1
SI2A
7
SB.LED(R)
7
9
IC302
S8424BAAFTG
QS8424BAAFTGP
D3002
NSDEMP11XV6T5
6
8
C3014
15P;CH
PW_LED
5
R3003
1K;1/16J
5
4
1
RB305
10K
4
2
REST
3
3
UNREG
SI1B
ALWAYS
+LI
SI1A
4
ALWAYS
5
3
2
3.2V
REG.
2
C3002
1;B
6
SI0B
CB302
0.1;B
CK1C104KUWBNG
MD0
BEEP
SREQ
ALWAYS3.2V
RB302
33K
MD1
1
RB308
33K
MD2
1
SI0A
Z3001
ML614-TZ14
1AV4D20B09300
MD3
PON
3
TEML17------G
Q3002
EML17
PW_ON
SHUTTER
S1
GND
PW_ON
PW.LED G_K
AL3.2V
NC
SCAN OUT 0
SCAN IN 3A
SCAN IN 2A
SCAN IN 1A
SCAN IN 0A
AF.LED_K
VDD5
SB.LED_K
AF HOJYO_K
NC
AVR-M1005C080MT
AVR-M1005C080MT
S1
VA305
SHUTTER
CN301
PAON
BACK UP3.2V
D3001
NSDEMP11XV6T5
1AV4J11SY170G
17
SBMON
LCDON2
C3007
15;6.3-T
1
5
Q3006
NSBC114EPD
6
SBCHG
0;1/16Z
SI0B
Q3005
NSBC114EPD
SI1B
R3030
150;1/16J
1
12
13
SI2D
14
SI3D
VM5.1V
SCAN IN
0
1
2
3
4
0
MD0
MD1
MD2
MD3
TEST
1
PW_ON
S1
DEL
SET
MENU
LEFT
RIGHT
AVJACK
WIDE
TELE
PW_TEST
SCAN OUT
2
UP
DOWN
3
PLAY
--
- Ｅ10 ･ E7900 -
MODEL: E7900
CIRCUIT DIAGRAM: CP1(SYA)
TO DMA
VAA46003-R.3659.A
18
10
XV3
V3B
17
11
XSG2B
V4
16
12
V4
VH
15
13
V6
VM
14
1;B
C9005
VH
C9004
XSG3A
0.1;F
V3B
XV7
VST
VHLD
XV6
XV8
XSG1A
V1A
21
7
XSG1B
V1B
20
8
XV1
V3A
19
9
XSG2A
VH
18
10
XV3
V3B
17
11
XSG2B
V4
16
12
V4
VH
15
13
V6
VM
14
Input Buffer
V4
C9006
0.1;F
V5A
V5B
V7
C9007
0.01;B
V6
V8
Input Buffer
V. DRIVER
C
1;H
B
E
7
6
5
4
3
2
����
8
����
9
10
����
11
����
12
����
13
����
14
CKD610JB0J225MT
XF901
1
470;1/16J
1
18
19
20
21
22
23
24
25
26
27
CCD
28
�
17
����
16
IC903
ICX489AQA-SN
L9002
FBMH1608HM102-T
3
R9005
VDD3
15
���
3.9;1/16J
��
R9036
���
L9001
100;K
Q9001
2SC3931
����
����
C9001
����
SUB
R9032
100;1/16J
����
V. DRIVER
TGHD
L9003
FBMH1608HM102-T
2
3
AD8
AD4
AD9
AD5
AD10
AD6
AD11
AD7
AD8
RB902
390
5
C9064
���
0.1;B
6
7
8
9
10
RB901
390
H. DRIVER
13
14
15
16
17
C9067
R9039
1.2K;1/16J
R9038
10K;1/16J
C
B
E
18
19
30
29
28
27
26
25
24
23
22
21
���
���
0.1;B
C9039
C9040
0.1;B
D9002
1M;1/16J
MA2J727
�
���
���
���
���
C9062 0.1;B
C9066 0.1;B
�
���
���
C9073
1000P;B
R9074
10;1/16J
C9065
0.1;B
20
R9069
3.3;1/16J
L9007
BLM15BB100
R9068
3.3;1/16J
L9006
BLM15BB100
L9005
BLM15BB100
L9004
BLM15BB100
R9067
Q9002
2SC5383
R9065
0;1/16Z
�
���
CDS, AGC, A/D C
12
CB902
1;B
REFB
REFT
AVSS
CCD IN
AVDD
CLI
TCVDD
TCVSS
RGVDD
RG
AD9949
AD10
AD11
C9068
22;10-T
31
IC906
11
AD9
32
C9061
33
R9034
R9031
100K;1/16J
0.1;B
�
���
34
���
AD7
4
D1
D2
D3
D4
DRVSS
DRVDD
D5
D6
D7
D8
35
22;10-T
C9069
AD3
AD6
36
H3
H4
RGVSS
1
37
�
AD2
38
���
AD1
39
0.15;B
40
���
RB903
390
1000P;B
AD0
���
�
4
���
AD5
1;B
AD4
C9019
AD3
VOUT
�
3
AD2
5
REG
3.0V
���
�
AD1
ON/
OFF IN
D0
CLP/BLK
HBLK
DVDD
DVSS
HD
VD
SCK
SDI
SL
2
CB901
1;B
AD0
C9063
TK11130CS
1
C9038
0.1;B
1;H
IC904
���
ADCK
SUBGT
10;B
1SS400
C9037
C9032
D9001
CCDCK
C9031
10;B
CCDSD
R9037
82K;1/16J
2
TGVD
CCDEN
���
AD11
XSG2A
XV5
6
D9
D10
D11
H1
H2
HVSS
HVDD
AD10
9
V3A
22
��
+3.45V(A)
AD9
19
XSG2B
VL
���
+3.45V(A)
AD8
V3A
XSG2A
XV2
���
-7.5V(A)
AD7
XV1
V1
5
V9
VOUT
GND
GND
GND
VDD
RG
H 2B
H 1B
SUB
CSUB
H 1A
H 2A
VL
GND
-7.5V(A)
AD6
8
10;B
23
���
+15V(A)
AD5
20
24
4
V2
R9033
2.2K;1/16J
+15V(A)
AD4
XVH
21
V1B
XSG1A
XSG1A
AD3
XVH
V1A
XSG1B
25
V1
XV1
XSG1B
XSG1B
AD2
XVS
XSG1A
7
XV4
SUB
XSG1
XSG2A
XSG2A
AD1
XVS
6
C9003
XV9
XSUB
3
XSG2B
XSG2B
AD0
XSG1B
22
XSG2C
XSG2C
ADCK
XV3
XV1
VL
XSG3A
XSG3A
SUBGT
XV2
XV2
XSG3B
XSG3B
CCDCK
XSG1A
5
V2
2
����
XVH
XV3
23
XSG3B
����
XVS
XV1
V2
V10
����
XV1
XV4
4
XV1
SUB
����
XV2
CCDSD
XSG2C
24
�
XV3
CCDEN
XV6
25
V1
�������� ���� ����� ��� ��
MODEL 26
�
XV4
TGVD
XV2
XV5
XV5
TGHD
XV7
SUB
XSG1
VDD
����
XV6
XV10
XSUB
3
C1-41800/SWQ14-WNK
1
V10
V9
V8
V7
V6
V5B
V5A
V4
V3B
V3A
VHLD
V2
VST
V1
XV7
XV8
2
MODEL 26
����
XV8
VDD3
XSUB
XV9
XV9
VDD
V 10
V 9
V 8
V 7
V 6
V 5B
V 5A
V 4
V 3B
V 3A
V HLD
V 2
V ST
V 1
XV10
XV10
1
CAA
IC902
CXD3440EN-1
�
XSUB
XSUB
R9007
0;1/16Z
TO DMA
IC901
CXD3440EN-1
1;B
C9002
CP1(CAA) 回路図
CP1 (CAA) CIRCUIT DIAGRAM
R9066
3.3;1/16J
3.3;1/16J
- Ｅ11 ･ E7900 -
MODEL: E7900
CIRCUIT DIAGRAM: CP1(CAA)
VAA46003-R.3659.A
CP1(VFA) 回路図
CP1 (VFA) CIRCUIT DIAGRAM
LCDD0
LCDD1
LCDD2
LCDD3
LCDD4
LCDD5
LCDD6
LCDD7
LMCLK
LCDHD
LCDVD
LCDEN
LCDSD
LCDCK
LCDD0
33
LCDD1
32
LCDD2
C1708
LCDD3
0.1;B
LCDD4
LCDEN
LCDD5
LCDSD
LCDD6
LCDCK
LCDD7
LCDVD
LMCLK
LCDHD
LCDHD
LMCLK
LCDVD
LCDD7
LCDEN
LCDD6
LCDSD
LCDD5
LCDCK
LCDD4
LCDD3
C1734
1;B
E
C
VDD3
R1736
100K;1/16J
R1735
10K;1/16J
Q1736
DTC144EM
R1734
75;1/10J
2125
L12V
LCDD0
R1701
560K;1/16J
C1701 10;B
L3V
L12V
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
12
D1703
D1PS79SB31
1608
D1702
D1PS79SB31
C1705 1;B
11
10
9
1608
D1701
D1PS79SB31
C1703
4.7;B
8
7
6
2125
C1706 1;B
1608
5
4
3
2125
2.2;B
VFA
30
13
10K;1/16D
C1702
1;B
C1704
4.7;B
31
14
2125
R1702
B
L3V
+12.0V(L)
LCDD1
Q1735
T12A01SS-TL-E
L1735 2012
LBR2012T470M
C1736
1;B
+12.0V(L)
LCDON2
R1739
47K;1/16J
LCDON2
2125
VDD3
LCDD2
VDD3
C1751
4.7;B
TO DMA
1608
C1707
2
1
TO LCD
VCOM
VSS
TEST
POCB
BLON
CS
DI
SCK
VSYNC
HSYNC
CLK
D07
D06
D05
D04
D03
D02
D01
D00
VBC
VSH
COMDC
VDD
VGH
VDC1
C2+
C2VGL
C1C1+
COMOUT
VVCOM
VSS
CN171
33
1AV4J11VE330G
Z1-41800/SWQ14-WNK
MODEL: E7900
- Ｅ12 ･ E7900 CIRCUIT DIAGRAM: CP1(VFA)
VAA46003-R.3659.A
CP1(CAB) 回路図
CP1 (CAB) CIRCUIT DIAGRAM
VDD3
C9503
0.1;F
M-GND
C9502
C9504
0.1;F
D-GND
100P;CH
36
35
34
33
32
31
30
29
VM34
PGND34
OUT4B
VM34
OUT4A
RESETB (FIL4)
FIL3
FIL2
IN7A
44
FIL7
45
R7
46
FB7
47
OUT7A
48
VM7
49
OUT7B
50
VDD
51
LGND
52
COSC
53
OE1
R9511
100;1/16J
C9533
1000P;B
C9532
1000P;B
37
OUT3A
150P;CH
38
OUT3B
R9507
43
39
MOB1 (VREF7)
C9501
40
SEL7
10K;1/16J
41
MOB2 (SELVEF7)
R9506
10K;1/16J
42
IN7B
VDD3
C9525
1000P;B
SIN1
0.1;F
SIN2
SIN1
Q9509
EMB10
TEMB10------H
0;1/16Z
SIN2
R9510
2.4K;1/16D
C9526
PICTL
R9509
PICTL
R9508
100;1/16D
VM5.1V
2125
C9512
0.022;B
1
6
2
5
3
4
1
FIL1
2
28
3
FB4
27
FB3
26
FB2
25
FB1
24
UPD168117K
OUT1B
23
VM12
22
LENS DRIVER
OUT1A
21
PGND12
20
10
OUT2B
19
11
VM12
18
12
IC951
R9501
2K;1/16D
R9504
2.4K;1/16D
R9503
2.4K;1/16D
R9505
470;1/16J
4
5
6
7
C9506
8
0.1;F
9
15
RB955
100K
1
2
3
4
D-GND
5
6
7
8
9
10
11
12
13
14
16
17
18
19
0.1;F
OE2/IN3A
TO DMA
C9505
56
IN6A
15
IIN1
IN6B
14
IN5B
IIN1
MODE1
16
MODE2
IN5A
MODE3
CW1
MODE4/IN4B
55
OUT5B
13
FCW
VM56
OUT2A
17
FCW
CLK1
PGND56
54
OUT5A
FCLK
OUT6A
FCLK
OUT6B
FOE
CW2/IN4A
FOE
CLK2/IN3B
20
M-GND
21
RB956
22
100K
23
TO LENS
MODE4
MODE4
MODE3
MODE3
MODE2
MODE2
MODE1
MODE1
ZIN1
ZRESET
ZPULSE2
ZPULSE1
FPI
D-GND
ZIN2
ZIN1
3
2
1
4
5
6
Q9501
EMH16
ZRESET
ZPULSE2
ZPULSE1
FPI
CAB(LENS)
Q9502
EMH16
3
2
1
4
5
6
RB954
47K
ZIN2
10K
390
IIN2
23
RB953
RB952
IIN2
CN951
ZMIB
ZMIA
ZKS0
ZKS1
ZKP1
D3.3V
SH2
AP1
AP2
SH1
ZEP1
D3.3V
ZES
FKP1
D3.3V
FKS
NC(GND)
NC(LBTMP)
NC(D3.3V)
AF2A
AF1A
AF2B
AF1B
1AV4J11PL232G
VDD3
33K
RB951
TO DMA
VM5.1V
R9516
0.43;1/4F
TO DMA CN102
C2-41800/SWQ14-WNK
MODEL: E7900
CIRCUIT-DIAGRAM:CP1(CAB)
- Ｅ13 ･ E7900
VAA46003-R.3659.A
PW1 回路図
PW1 CIRCUIT DIAGRAM
D9601
SD833-04(SC)
R9606
130K;1/16D
FB
VDD
EXT
CE
5
M-GND
D5007
S
6
2
5
3
R5035
47K;1/16J
3216
C5031
4.7;B
C5030
0.033;B
-7.6V(A)
Q5008
Q5004
MCH5803-E
10K;1/16J 100K;1/16J
R5055
R5054
2
3
2SA1774
6
2
5
3
4
DTC144E
+12V(L)
EMF18
CN501
1AV4J10YB300G
30
R5037
5.23K;1/16D
C5034
1
4
1000P;B
5
1
R5040
10K;1/16J
1AV4L2MH100MG
OM/ORLL98Z
R5038
CH5
0;1/16Z
R5034
Q5001
RSR025N03
L5004
10;M
R5043
68;1/16D
2125
C5033
D
+15V(A)
47;M
1AV4L2FM470MG
4.7;H
4
JW503
G
R5033
5.1K;1/16D
BAT_T
HN2D01JE
8
C5032
1;B
2125
R5201
0;1/10Z
T5001
1AV4L51B6441G
LDT565620T-VP2
R5032
7
F47K2R0C3LFND
1608
2.0A 32V
4
2125
16V
JW502
5
3
C5022
1;B
L5010
1AV4L26B3450G
2125
BAT-
1
2
C5028
22;6.3B
BAT+
TO BATTERY
!
2125
L5001
150K;1/16D
1
F5002
2A
L5009
1AV4L26B3450G
R5046
3K;1/16J
UNREG
<FOR ANALOG>
R5036
CH4
JW501
Q9602
DTC144EM
M-GND
8.2K;1/16J
!
4
120K;1/16D
1608
2.0A 32V
DC-DC /CONV.
2125
16V
-
1
C5029
1;B
UNREG(ST)
JW542
!
1608
2.0A 32V
F5001
2A
F47K2R0C3LFND
2
2125
16V
JW541
+
TO STROBO
2A
F5005
F47K2R0C3LFND
3
GND
IC961
XC9104D095MP
C5035
M-GND
M-GND
1;B
Q9601
FDC633N-NF
OM/ORTR16Z
H=1.2
R9607
4
274K;1/16D
5
3
R9604
6
2
POS-CAP
1
412K;1/16D
M-GND
BOOST5.1V
(5.1V: PON_H)
(3.75V: PON_L)
C9604
P1-41800/SWQ14-WNK
�������� ���� ����� ��� ��
C9603
33;10-V
H=3
D53LC
22P;CH
L9601
10;M
1608
2125
!
C9601
22;B
PW1
1608
2.0A 32V
C9602
1;B
<BOOST/LENS>
2A
F5004
F47K2R0C3LFND
25
23
22
21
20
R5020
1K;1/16D
IN5-
OUT1D-1
39
�����
5
FB6
PGND1-2
38
�����
6
IN6-
PGND1-1
37
�����
7
IN6+
OUT2D-2
36
�����
�����
8
FB7
OUT2D-1
35
�����
OUT2S-2
34
�����
OUT2S-1
33
�����
OUT4
32
�����
OUT5
31
�����
19
20
21
22
23
24
25
PGND2
18
PVCC
17
CS1
16
26
27
28
R5052
1K;1/16D
5
4
3
2
1
TO CP1(DMA)
CN102
<FOR DIGITAL 1.41V>
L5006
10;M
1.41V(D)
1AV4L2L5100MG
OM/ORLLA0Z
R5026
OM/ORTR71Z
Q5007
DTC114EM
5.49K;1/16D
L5007
22;M
1AV4L2L5220MG
OM/ORLLA0Z
LCD ANODE
5
4
1
2
3
Q5002
MCH5803-E
4.7K;1/16J
1K;1/16J
R5029
R5030
LCD CATHODE
R5031
11;1/16D
<FOR BACKLIGHT>
C5026
1000P;B
FA1526
CH6
R5028
1;B
C5007
C5008
0.01;B
�����
�
15
�����
�����
PGND3-2
�����
29
SW6
30
OUT7
VS6
OUT6
DTCT
�����
VCC
14
�����
13
PGND3-1
�����
CH1
6
1.82K;1/16D
�
�����
7
150K;1/16J
VREG
SWITCHING CONTROL
8
2125
16V
12
IN7-
R5023
C5025
1;B
GND2
9
MGND
MGND
MGND
VM5.1V
VM5.1V
VM5.1V
BAT-T
UNREG
GND
GND
GND
VDD1.4
VDD1.4
VDD3
VDD3
+15V(A)
-7V(A)
VDD5
PON
PAON
LCDON
LCDON2
BLON
GND
+12V(L)
BL_AN
BL_CA
GND
GND
GND
R5025
RT
11
�����
�
10K;1/16D
9
10
�
VREF=0.5V
VREG=1.5V
11
FA1526
CUS01,Q
D5006
4
R5022
�����
�����
10K;1/16D
40
C5013
330P;B
OUT1D-2
R5017
3K;1/16J
FB5
1AV4L2JQ100MG
DB320C
22;6.3B
2125
CS2
3
10;M
�����
22;6.3B
2125
CNT1
�����
QFA7723R-H4-G
FA7723R-H4-TE1
12
3.25V(D)
C5023
CNT3
41
<FOR DIGITAL 3.25V>
C5024
CNT4
OUT1S-1
CUS01
D5003
CNT5
IN4-
IC501
13
R5053
1K;1/16D
�����
�����
�����
�����
�����
CNT6
FB1
GND
2
�����
1;B
CNT7
�����
CUS01
D5004
IN1-
42
�����
15
0.047;B
C5009
FB2
OUT1S-2
�����
16
L5005
�����
FB4
30K;1/16D
OM/ORVR26Z
H=0.85
CH2
1
OUT3D-2
VR501
1AV4R3H7682NP
43
OUT3D-1
R5009
6.8K
44
OUT3S-2
PVZ2A_A04
(MURATA)
2.2K;1/16J
1;B
C5006
R5014
2.2K;1/16D
R5015
330;1/16D
C5004
45
OUT3S-1
R5007
0.068;B
�
FB3
IN3-
560;1/16J
46
SW7CONT
4.7K;1/16J
R5005
47
SW5
2200P;B
48
VS5
C5003
17
10
�����
�����
R5003
49
������
1000P;B
C5005
FA1526
FA1526
0.01;B
C5002
50
������
R5001
5.6K;1/16J
C5001
R5048
80.6K;1/16D
C5017
0.047;B
C5010
3300P;B
R5010
�����
�����
51
�
52
18
14
13K;1/16J
C5011
3300P;B
R5012
4.3K;1/16J
�����
53
IN2-
�����
�����
54
19
R5050
80.6K;1/16D
S
24
R5018
47K;1/16J
Q5003
CPH3439-D-E
D
26
R5049
80.6K;1/16D
SD833-04(SC)
G
55
27
OXI CAP
C10J330MABANG
L5003
4.7;N
OM/ORLL79Z
56
28
H=1.2
D5001
C5016
33;6.3
H=2
NP04SB
CH7
29
BLON
P ON
PA ON
LCD ON
- Ｅ14 ･ E7900 -
MODEL: E7900
CIRCUIT DIAGRAM: PW1
VAA46003-R.3659.A
総合ブロック図
OVERALL BLOCK DIAGRAM
D(0:15)
A(1:21)
IIN1,IIN2
SIN1,SIN2
ZIN1, ZIN2
IC951
ZRESET
PICTL
LENS DRIVER
ZPULSE1,2
ADCK
CCDEN
CCDSD
CCDCK
FD(0:7)
AD(0:11)
V. DRIVER
TGVD,TGHD
H. DRIVER
XV(1:8)
CDS, A/D C
CCD
SUBGT
7M Pixel
IC901
IC902
XSG(1A:4A, 1B:4B)
FLASH(NOR)
32Mbit
IC906
IC903
XSUB
IC121
FLASH(NAND)
128Mbit
CAB(LENS)
CN951
CP1
CCD
CN302
CLOCK GENERATOR
CN143
IC101
SREQ
ASIC
CKIN1
CKIN2
FSC4
4MHz
X3001
32.768KHz
X3002
FD(0:4)
LCD (HD, VD)
LMCLK
LCDD (0:7)
LCDCK
LCDSD
LCDEN
PADYOUT
USBD-
USBD+
PADAOUT
ASICAIN
AUDIO
CONTROL
SIGNALS X 5
SD CARD
VDD
IC302
REGULATOR
Z3001
BACKUP
SYA
IC152
MIC
SPEAKER
IC501
VIDEO AMP
IC181
AUDIO
DRIVER
BACK SW UNIT
8bit Micro Processor
SDI
SDRAM
IC111
RELEASE UNIT
SDO
IC104
256Mbit
X1101
28.63636MHz
IC301
SCK
SD(0:31)
3
CN301
MRST
IC103
256Mbit
SDRAM
LENS
USB/VIDEO
AUDIO OUT
VOUT
LCD MONITOR
LCD BACKLIGHT
DC/DC
CONVERTER
B-B
CONNECTOR
CN110
IC961
LENS
DC/DC
CONVERTER
BACK LIGHT
VFA
PW1
- Ｅ15 ･ E7900 -
MODEL: E7900
BLOCK DIAGRAM: OVERALL
LENS
O_LPF
7:13
23
V4, V5A, V5B, V[6:9]
IC903
-7.5V(A)
27
CCD
ICX489AQA-SN
VDD
19
SUB
2, 4
VST, VHLD
H1B
1, 3, 5, 6, 14
V1, V2, V3A, V3B, V10
22
H1A
25
VOUT
RG
VL
21
H2B
- Ｅ16 ･ E7900 25
16, 15
21, 23, 19, 17, 24
15
EF
27
19
14
18
H4
H1
H3
V. DRIVER
CDX3440EN
IC902
V. DRIVER
IC901
CDX3440EN
SW
+3.45V
+3.45V(A)
15
H2
RG 21
Q9002
Q9001
23, 21, 20, 16, 19, 15, 24
26
H2A
20
CSUB
24
CLI, VD, HD
25, 34, 35
XSG2A, XSG2B, XSG3A, XSG3B
6, 7, 9, 3
AD[0:11]
40, 1:4, 7:13
XV4, XV5, XV6, XV7, XV8, XV9
5, 8, 12, 10, 13, 4
XSG2C, XSG1A, XSG1B
6, 9, 11
XV1, XV2, XV3, XV10
8, 5, 10, 4
XSUB
VDD3
REG
TK11330CS
IC904
3.0V
XVS, XVH
12, 13
2
IC906
AD9949
CDS, A/D C
H. DRIVER
CCD IN
SL
31
SDI
32
SCK
33
+15V(A)
64:59, 57:52
39
XV9
79
XSG3A
93
92
94
95
96
XSG3B
XSG1A
XSG1B
XSG2A
XSG2B
XSG2C
99
100
78
MODEL: E7900
BLOCK DIAGRAM: CCD
XV8
80
81
82
83
84
85
86
71
XV10
XV1
XV2
XV3
XV4
XV5
XV6
XV7
89
91
SUB GT
XVS
XVH
XSUB
90
CCDEN
CCDCK
CCDSD
ADCK
TGVD
TGHD
70
181
180
182
104
103
AD[0:5], AD[6:11]
IC101 ASIC
VAA46003-R.3659.A
CCD ブロック図
CCD BLOCK DIAGRAM
VAA46003-R.3659.A
LENS ブロック図
LENS BLOCK DIAGRAM
UNREG(ST)
VDD3
SW REG.
IC961
Q9601
D9601
L9601
VM5.1V
UNIT LENS
CN951
6, 12, 15
Q9509
D3.3V
ZPLUSE1
4
PICTL
(IC101 197pin)
ZPULSE1
(IC101 238pin)
Q9502
ZPULSE2
(IC101 239pin)
3
5
ZPLUSE2
ZOOM_PI
13
ZRESET
(IC101 234pin)
11
Q9501
FOCUS_PI
16
FPI
(IC101 237pin)
14
IC951
16
ZIN1
(IC101 184pin)
ZIN2
(IC101 183pin)
14
15
13
UPD168117K
IN5A
IN6A
OUT5A
OUT6A
IN5B
OUT5B
IN6B
OUT6B
6
4
ZM1A
2
8
ZM1B
1
AF1A
21
17
AF2A
20
23
AF1B
23
19
AF2B
22
47
SH1
10
49
SH2
7
36
AP1
8
38
AP2
9
ZM.M
3
ZOOM DRIVER
FOE
(IC101 218pin)
FCLK
(IC101 216pin)
FCW
(IC101 219pin)
53
54
55
OE1
OUT1A
CLK1
OUT2A
CW1
OUT1B
OUT2B
21
FC.M
FOCUS DRIVER
SIN1
(IC101 194pin)
SIN2
(IC101 193pin)
IIN1
(IC101 196pin)
IIN2
(IC101 195pin)
43
42
56
1
IN7A
OUT7A
IN7B
OUT7B
IN3A
OUT3A
IN3B
OUT3B
SH.M
IR.M
IR/SH DRIVER
- Ｅ17 ･ E7900 -
MODEL: E7900
BLOCK DIAGRAM: LENS
- Ｅ18 ･ E7900 -
CCD
DRIVER
AUDIO
DRIVER
RGB
6bit DATA
COMPOSITE
VIDEO
CCD
BLOCK
TG
D/A
DIGITAL
I/F
135MHz
48MHz
4fsc
D/A
A/D
ENCODER
NTSC/PAL
SIGNAL
PROCESSOR
AF,AE,AWB
DIGITAL
CLAMP
IC101 ASIC
CLKGEN
PLL
SRAM
33.75MHz
96MHz
SRAM
BUS
SRAM
BUS I/F
BUS
FLASH
(NAND)
JPEG
CONTROLLER
SDRAM
CONTROLLER
SDRAM
FLASH
(NOR)
SD
USB
UART
ARM
PIO
SIO
PWM
MODEL: E7900
BLOCK DIAGRAM: ASIC
EXT PORT
(LENS DRIVER)
IC301
MICRO
PROCESSOR
SD CARD
USB
CONNECTOR
VAA46003-R.3659.A
ASIC ブロック図
ASIC BLOCK DIAGRAM
VAA46003-R.3659.A
SYSTEM CONTROL ブロック図
SYSTEM CONTROL BLOCK DIAGRAM
UNREG
VM5.1V
ALWAYS3.2V
RESET 5
VDD 6
VDD
23 VDD
12 RESET
8
3 LI
4 BAT
OFF
1
AL3.2V 8
BATTERY
BACKUP
Q3002
2
IC302
UNREG 7
5
BACK UP
Z3001
Q3001
BATTERY
41
BACKUP_CTL
33
34
35
13
14
SCAN IN0
SCAN IN1
SCAN IN2
SCAN IN3
SCAN IN4
MD0
MD1
MD2
MD3
TEST
28
SCAN OUT0
PW_ON
S1
DEL
SET
MENU
29
SCAN OUT1
UP
DOWN
LEFT
RIGHT
AVJACK
30
SCAN OUT2
PLAY
--
WIDE
TELE
PW_TEST
31
SCAN OUT3
PA ON
SBCHG
BAT_T
SB CHG 42
21
SW3.2V
CN301
CN302
P ON 36
PA ON 37
BAT OFF
AVREF
43 SW3.2 ON
SBMON
PON
SB MON 40
24
15
VSS
BATSEL 20
LCD ON 38
PA ON2 48
LCDON
PAON2
SBVDD_CTL2
SBVDD_CTL2 44
IC301
XCIN 9
8bit MICRO
PROCESSOR
XCOUT 10
XOUT 6
XIN 7
X3002
32KHZ
X3001
4MHZ
USBCNT
USB_CONNECT 32
COMREQ
COMREQ/BOT 47
PW_LED
3 SB_LED (R)
4 AF_LED (G)
25 SHUTTER
CN301
TO DMA(MAIN)
BEEP
LCDON2
SREQ
BEEP 27
LCD ON2 39
SREQ 26
SDO
SI 17
SDI
SO 16
SCK 18
SCK
MAIN RESET 1
MRST
ZCARD
CARD 22
2
TO DMA(MAIN)
TEMP_BAT 19
- Ｅ19 ･ E7900 -
MODEL: E7900
BLOCK DIAGRAM: SYSTEM CONTROL
24
30
40
39
FA7723R
44
CNT4 46
SWITCHING
CONTROL
25
10
IC501
32
VR
VR501
49
CNT5 47
CNT6 48
CNT7, CNT1
31
35, 36
29
- Ｅ20 ･ E7900 OUT6
OUT1D-2
OUT1D-1
OUT2D-2
OUT2D-1
OUT7
OUT5
OUT4
IC961
L5007, Q5002
STEP UP
CIRCUIT
L5006
STEP DOWN
CIRCUIT
L5005
STEP DOWN
CIRCUIT
L5003, Q5003
STEP UP
CIRCUIT
STEP UP
CIRCUIT
L5004, Q5004
T5001,Q5001
CONVERTOR
TRANS
Q9601, L9601
STEP UP
CIRCUIT
VS6
4.85V
Q9602
SW6
Q5008
CURRENT
DETECTOR
CIRCUIT
1.41V(D)
3.25V(D)
+15V(A)
+12V(L)
VDD5
VDD3
VDD1.4
15
6
13
17,16
19,18
TO CP1(DMA)
CN102
BLON
MODEL: E7900
BLOCK DIAGRAM: POWER
8
LCDON
11
10
PON
12
PAON
BL_CA
4
BL_AN
-7V(A)
14
5
VM5.1V
27:25
CN501
VAA46003-R.3659.A
POWER ブロック図
POWER BLOCK DIAGRAM
VAA46003-R.3659.A
FUSE 配置図（PW1 基板）
FUSE configuration (PW1 PCB)
-
VR501
F5002
F5002
R5004
R5006
L5009
IC501
SIDE-B
F3300AA
SWQ14_PW1
- Ｅ21 ･ E7900 -
F5001
R5009
R5002
C5024
L5006
C5025
VA502
C5032T5001 C5028
L5002 C5037
C5033
C5022 D5001
C9602
Q5001
D5007
R5036
R5032
R5043
R5033
C5031
C5009
C5023
R5046
C9603
D9601
C5029
Q9601
R5035
C5030
L5001
C5035
D5004
F5004
+
R5034
L5005 D5003
R5201
T
Q9602 Q5007
F5004 F5001
R9604
D5006
VR501
R9607
C5036
Q5003
L5003
2A
C9604
+
L5004 Q5004
2A
IC961
R9606
Q5002 L5007
C5016
+
L9601
C9601
L5010
-
F5005
+
BK RD
2A
F5005
2A
VAA46003-R.3659.A
The contents of inspection standards and tools for E7900
[1] Inspection standards ･････････････････････････････････････････････ R1 to R8
[2] Tools ･････････････････････････････････････････････････････････ T1 to T5
- E7900 -
INSPECTION STANDARDS
Item
Criteria
VAA46003-R.3659.A
Applied tool(s)
External view
Gap/Difference in
height
・ General components
Visual observation
Gap: 0.3mm or less
Difference in height: 0.15mm or less
・ Clearance between the battery case and the back surface of the
rear cover: 0.5mm or less : 0.3mm or less when there is a bulge.
・ Clearance between the SD card cover, the belt and the rear cover:
Total clearance of the up-and-down direction: 0.45mm or less
Play in the up-and-down direction: 0.2mm or less
Outside and inside
status
・ There must be no noticeable damage, soil, sink mark, welded
Visual observation
mark, crack or oil exudation.
Operation/Operability
Operation
・ While operating, any irregularities or irregular noise shall not be
required.
Secondary battery
(Check it by shaking the camera while operating.)
(Lightly hit the camera onto the Linoleum-laid desk while
operating.)
Operability of buttons
・ No cave-ins of the buttons shall be required.
・ Operator must feel "click" on each button.
・ "Click" must occur when or after a switch is ON.
・ Buttons must be pressed by the belly of your finger.
(Check it while operating normally.)
Mode/Dial
Primary battery/
・ When clicking, normal touch shall be required. Any outstanding
"caught-in-mechanism" touch or "rubbed-in-mechanism" touch or
play shall not be required.
(Check and observe the condition through normal operation.)
- R1･ E7900 -
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
Operation/Operability
Operation touch
・ When operating a lever or knob by hand, any irregular conditions
shall not be required.
(Operate the camera in the actual photography procedure and check
the operation touch.)
Battery/Card cover
・ When closed, there must not be an extreme play.
・ The cover can be opened/closed without any outstanding“caughtin-mechanism”touch or“rubbed-in-mechanism”touch.
・ The hinge unit must not have an extreme play.
External terminal cover ・ The cover must be opened/closed correctly.
・ The cover must be closed without an extreme play.
Lens capacity
Focal length
Wide-end position (Perform measurement at the“∞”position.)
7.8mm + 7%
Focal length
measuring instrument
- 2%
Lens drive tool
Tele-end position (Perform measurement at the“∞”position.)
23.4mm + 2%
- 9%
Open aperture F No.
Wide-end position (Perform measurement at the“∞”position.)
F2.8 + 7.8%
+ 1.5%
Tele-end position (Perform measurement at the“∞”position.)
F4.9 + 9.9%
+ 4.0%
Peripheral light reduction
・ Design value (Reference, imcluding macro)
Opposite
Ghost/Flare
Long side
Short side
Wide 50.6%
77.7%
86.5%
Middle 76.3%
82.9%
89.1%
Tele
87.4%
91.3%
78.1%
・ There must not be an outstanding ghost/flare.
Ghost in the surface ・ There must not be an outstanding flare at the center.
light source
Distortion
・ There must not be an outstanding deformation.
- R2･ E7900 -
Visual observation
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
Lens barrel
Zoom
・ There must not be an abnormal action (for example, the unit
Visual observation
operates one-sidedly or its operation is not smooth or it is caught).
・ There must not be an abnormal action.
(As changing the camera's posture, check it in all the directions.)
Focus
・ There must not be an abnormal action.
Shooting with a speed
light
Light adjustment accu-
・ Tele-end: 0.5 ~ 3.5m
Standard reflection
racy
・ Wide-end: 0.5 ~ 4.5m
plate
± 0.5Ev or less in the above range when evaluating the image
・ Wide 0.3m ～ 0.5m ± 1.0EV or less
(Speed light: Compelling flash, Exposure: Auto mode
Perform checking in the full charged condition.)
Guide No. FULL
(ISO100・m)
・ 8.7 or more
Flash meter
(Perform charging with a full charged battery for 10 seconds and
Secondary battery
carry out flashing within 1 second. Then, perform measurement.)
Recycling time
・ Within 6.5 seconds
Stop watch
New secondary
battery
Wrong flash
・ Wrong flash must not occur.
New secondary
(Check by loading/unloading a battery, giving a light shock and
battery
operating mode buttons except S2.)
- R3･ E7900 -
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
Quality of image
Resolution in AF
The resolution must be in compliance with the following values in
EIAJ chart
all the postures of the EIA J chart evaluation.
PHOTOSHOP
< 7M-FINE >
・ Horizontal center: 1300 TV lines
Vertical center: 1300 TV lines
Horizontal line(s) at each corner: 800 TV lines
Vertical line(s) at each corner: 800 TV lines
(Take a picture with AUTO, 7M, FINE and PWB to be in the
aperture "open" condition.)
(Take a picture with a full angle of view under the condition of
WIDE-end, MIDDLE (Z06), TELE-end and the distance of 0.3m
or more.)
(Then, open the recorded image data file through PHOTOSHOP
and check the resolution visually.)
Gradation/luminance
5100K viewer
level
[Histogram's gray average value]
Gray scale chart
Quality of image
Black: 14 ± 7
PHOTOSHOP
Gray:
134 ± 15
White: 225 ± 10
(Equip the 5100K viewer with a chart and shoot an object in the
full range of angle of view in the "AUTO", "7M" and "FINE"
modes.)
(Open the recorded image data file through PHOTOSHOP and
pick up a measurement section with the each color (its central
area 64 × 64 pixels) with the rectangle selector tool.)
(Read the histogram's gray value and the gray standard deviation.)
・ Measurement section
Luminance level:
Upper left 1 step: Black, 6 steps: Gray,
Center: White Lower left 6 steps: Gray, 11 steps: Black
- R4･ E7900 -
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
Quality of image
Noise
Calculate the maximum value δ Ymax, δ Rmax, δ Gmax and
Gray scale chart
δ Bmax of the measurement point (gray scale: 22 patches).
PHOTOSHOP
・ Minimum ISO sensitivity
δ Ymax ≦ 3.5
δ Rmax 、δ Gmax 、δ Bmax ≦ 3.5
・ISO200 δ Ymax ≦ 5.0
δ Rmax 、δ Gmax 、δ Bmax ≦ 5.0
（7M, FINE, PWB, center-weighted metering, Outline: Standard
gradation: Standard, Chroma correction: 0, Min. ISO sensitivity:
ISO200）
（Correct exposure to obtain "220 (8 bits)" in the case of "White
100%".）
(Equip the 5100K viewer with a scale and shoot an object in the
full range of angle of view.)
（Perform defocusing not to generate reticulate moires.）
（Calculate the standard deviation δ Y, δ R, δ G and δ B of
Y, R, G and B for the central area 64 pixels × 64 pixels of each
density.）
Reproduction of color
Color bar chart
B
W
Ye
R
R
209 ± 20
208 ± 20
180 ± 20
G
209 ± 20
208 ± 20
010 ± 10
B
209 ± 20
30 ± 15
10 ± 10
(Photography mode: AUTO)
(Equip the 5100K viewer with the chart and shoot an object in the
full range of angle of view.)
(Open the recorded image data file through PHOTOSHOP and
pick up a measurement section with each color (its central area 64
× 64 pixels) with the rectangle selector tool.)
(Read the histogram's RGB.)
- R5･ E7900 -
PHOTOSHOP
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
Finder
View / Image
・ There must be no blur, distortion, ghost, halation or other out-
Visual observation
standing troubles in contrast, gradation, etc.
Visual field frame/
・ There must be no noticeable unevenness.
Visual observation
frame line
・ You can see the object clearly without blur or difference in thickness.
Dust, fluff and damage
・ The position and quantity must be as follows
Zone
Size
Less than 10μm
10 ～ 20μm
More than 20μm
A
0 pc
0 pc
0 pc
B
Visual observation
C
2pcs or less 3pcs or less
0 pc
1pcs or less
0 pc
0 pcs
b
b/2
b/6
B
A
a/8
a/2
a
C
Total: 3 pcs. or less Interval: b/2 or more (half the long side or
more)
The size and quantity of blurred pieces depend upon a limit
sample.
- R6･ E7900 -
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
LCD and others
Monitor LCD
View
・ The reproduction of W, B and RGB must be performed without a
hitch.
Visual field ratio ・ Through-the-monitor image:
94 to 100%
・ Play-back image:
Defect in pixels
98 to 100%
・ Defect in lines: There must be no defect.
・ Defect in points: The defect quantity must not exceed the values
as shown in the table below.
Bright
Zone A
Zone B
Total
pixel
0
1
1
Dim pixel Dark pixel
2
2
2
2
2
2
Bright pixel: Visible through the 2% ND filter
Dim pixel: Visible through the 5% ND filter
Dark pixel: Darkly visible
Continuous bright/dim pixel: There must be no continuous bright
pixel.
Continuous dark pixel: There must be no continuous dark pixel.
Defect in pixels must be total 3 pcs. or less.
(Perform reproduction for each single color of R, G, B and white
and check visually.)
1
4
1
1
A
B
4
1
B: Valid display range
A: Area of 16/36 when measured from the center of B
- R7･ E7900 -
Visual observation
VAA46003-R.3659.A
Item
Criteria
Applied tool(s)
LCD and others
Self / AF LED
Self-display operation
Operation time:
Visual observation
10 seconds ・ 10 ± 1 second
Stop watch
LED blinks/lights ・ Blinks nine times and lights for 1 second.
Electric characteristics
Consumption current
Constant voltage
Stand-by ・ 0.27mA or less (when the power switch is OFF without the SD
card)
power supply
Ammeter
・ 0.39mA or less (when the power switch is OFF with the SD card)
・ 12mA or less (at "Sleep")
Start (Photography) ・ 0.75W or less (when the power switch is OFF)
・ 1.1A or less (when the AUTO "0" start monitor is ON)
B. C voltage
Constant voltage
Secondary
power supply
Level 1 ・ 3.575 ± 0.2V
Volt meter
Level 2 ・ 3.3 ± 0.2V
Level 3 ・ 2.75 ± 0.2V
When voltage rises
Level 1 ・ 3.725 ± 0.2V
Primary battery
Level 1 ・ 2.30 ± 0.2V
Level 2 ・ 2.175 ± 0.2V
Level 3 ・ 2.0 ± 0.2V
When voltage rises
Level 1 ・ 2.7 ± 0.2 V
- R8･ E7900 -
VAA46003-R.3659.A
［２］工具一覧表　Tool List
※：新規工具
※：New tool
J63080
工具番号
名　称
備　考
Tool No.
Name
Remarks
パターンボックス　LV-1450DC
Pattern Box
J63080A
J63081
J63068
LV-1450DC
共通 (E4300, E3500,
E3100, E2100, E5400,
E3700, E3200, E2200,
E8700, E4100, E4600,
E5600, E5900, E7900)
Common(E4300, E3500,
E3100, E2100, E5400,
E3700, E3200, E2200,
E8700, E4100, E4600,
E5600, E5900, E7900)
交換用ハロゲンランプ (LV-1450DC 用 )
LV-1450DC
Spare Harogen Lamp
Exclusive
(For LV-1450DC)
カラーメータ ( ミノルタカラーメータⅢ F)
共通
Color Meter(Minolta Color meter Ⅲ F)
Common
輝度計 BM-3000
共通
Luminance Meter BM-3000
Common
POWER
BM-3000
- T1･ E7900 -
VAA46003-R.3659.A
※：新規工具
※：New tool
工具番号
名　称
備　考
Tool No.
Name
Remarks
J65071
キャリブレーションソフト
Calibration Software
J63090
サービスマニュアル添付
共通 (E995,E775,E885
E5000, E2500, E4500
E5700, E4300, E3500
E3100, E2100, E5400
E3700, E3200, E2200
E8700, E4100, E4600
E5600, E5900, E7900)
Common(E995,E775,E885
E5000, E2500, E4500
E5700, E4300, E3500
E3100, E2100, E5400
E3700, E3200, E2200
E8700, E4100, E4600
E5600, E5900, E7900)
コリメータ (C-DSC)
共通
Collimator
Common
(C-DSC)
ジーメンスチャート
Attached in
共通
Common
Service Manual
J63079
ITE 高精細解像度ﾁｬｰﾄ (4:3 反射型 )
共通
ITE HIGH RESOLUTION CHART (4:3 REFLECT TYPE)
Common
- T2･ E7900 -
VAA46003-R.3659.A
※：新規工具
※：New tool
工具番号
名　称
備　考
Tool No.
Name
Remarks
J61202
レンズユニット検査工具
FFD 点検調整用
Lens unit checking tool
For FFD inspection and
adjustment
※ J61202E
接続コード
FFD 点検調整用
Connection cable for lens
For FFD inspection and
adjustment
J61204
デジタル通信ボード
FFD 点検調整用
PCI I/F board
For FFD inspection and
adjustment
J61204A
通信ボード用ケーブル
FFD 点検調整用
Connection cable for PC
For FFD inspection and
adjustment
- T3･ E7900 -
VAA46003-R.3659.A
※：新規工具
※：New tool
工具番号
名　称
備　考
Tool No.
Name
Remarks
J15327
FFD 調整用マイクロ台
FFD 点検調整用
Adjusting focus stand for APS
For FFD inspection and
adjustment
J15327A
FFD 調整用マイクロ台アダプター
FFD 点検調整用
Adapter for J15327A
For FFD inspection and
adjustment
※ J15327B
FFD 調整用マイクロ台アダプター
FFD 点検調整用
Adapter for J15327D
For FFD inspection and
adjustment
J65067
E4200/E5200 鏡筒駆動ソフト
FFD 点検調整用
E4200/E5200 lens unit checking program
For FFD inspection and
adjustment
- T4･ E7900 -
ジーメンススターチャート
VAA46003-R.3659.A
- T5･ E7900 -