Samsung T769 Galaxy S Blaze. Locking and Unlocking the Device

Switching the Device On or Off
If you have not already configured your device after an initial
firmware update, you will be prompted with a series of
configuration screens.
䊳
Place your finger on the screen and swipe the glass in any
of the directions shown unlock the device.
Once the device has been configured, you will not be prompted
with these screens again.
Important!: Before the initial configuration, you quickly access emergency
services by tapping Emergency call and using the on-screen
dialer.
1.
Press and hold
until the device switches on.
The device searches for your network and after finding it,
you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
“Language & Keyboard Settings” on page 240.
2.
Press and hold
until the Phone options screen
appears.
3.
Tap Power Off (
).
Locking and Unlocking the Device
Note: You can choose to configure lock settings to prevent unauthorized use
of your device. For more information, refer to “Setting up SIM Card
Lock” on page 230.
By default, the device screen locks when the backlight turns off.
Getting Started
15