Samsung Galaxy Light. WiFi Settings

Accounts:
This tab provides both the ability to create and
modify your accounts (ex: Samsung account,
Email, etc.), and access Backup and reset features.
Wi-Fi Settings
This section describes the Wi-Fi settings. For more
information, refer to “Wi-Fi” on page 206.
Activating Wi-Fi
More:
1. From the Home screen, press
and then tap
Settings ➔
(Connections tab).
This tab provides access to the remaining set of
device settings not listed under the other tabs.
These include Location services, Security,
Application manager, Battery, Storage, Date and
time, and About device.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on
ON . The device scans for
available in-range wireless networks and displays
them under Wi-Fi networks on the same screen.
Note: The settings for your device are described below using
the order in which they appear in the Settings menu.
Functions found under the Connections tab are listed
first, followed by My device, Accounts, and More tabs.
Wi-Fi settings
Once set up for Wi-Fi connectivity, your device automatically
uses Wi-Fi, when available, for all your mobile services.
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press
and then tap Advanced. Configure the
settings as desired.
The available Wi-Fi connection are displayed with a security
type displayed next to them.
Changing Your Settings
213
Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your phone detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press
and then tap Advanced.
3. Tap Network notification. A check mark displayed next
to the feature indicates Network notification is active.
4. Tap Network notification again to remove the check
mark and deactivate this feature.
Passpoint
Wi-Fi CERTIFIED Passpoint™ allows users connect to Wi-Fi
hotspot networks by simplifying the process of connecting to
the correct network. In addition, this connection type
provides WPA2™ security protection for safe data
communication. Mobile devices, such as handsets and
tablets, that are certified for Passpoint can still be used in
existing hotspots. Users on passpoint-enabled hotspots, will
also enjoy Wi-Fi roaming.
214
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press
and then tap Advanced.
3. In a single motion touch and slide the Passpoint slider
to the right to turn it on.
4. Tap the Passpoint field and begin the on-screen
process of connecting to a compatible AP.
Wi-Fi During Sleep
Auto Network Switch
By default, when your device enter a sleep mode, your Wi-Fi
connection stays on all the time. If the feature is Never
enabled during sleep that current data usage is taken over by
your SIM and its network connection.
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
This feature allow the device to automatically switch
between available Wi-Fi networks and the current mobile
network.
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press
and then tap Advanced ➔ Keep Wi-Fi on
during sleep.
3. Tap the Auto network switch field to activate the
feature. A green check mark indicates the feature is
active.
3. Select an available option:
• Always: maintains your current active Wi-Fi connection even
during sleep.
• Only when plugged in: maintains the active Wi-Fi connection
only when the device detects it is connected to a power supply.
This reduced the drain on your device’s battery.
• Never (increases data usage): shuts off the current Wi-Fi
connection during sleep and diverts any current data usage to
the cellular network connection.
2. Press
and then tap Advanced.
Finding your WI-Fi Address Information
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press
and then tap Advanced.
3. Locate the MAC Address and IP Address information at
the bottom of the screen.
• MAC address: view your device’s MAC address, required
when connecting to some secured networks (not configurable).
• IP address: view your device’s IP address.
Changing Your Settings
215
Manually Adding a Wi-Fi Network
1. From the main Settings page, tap Connections tab ➔
Wi-Fi ➔ Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless
Access Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP (Wireless Access Point).
4. Enter your WAP’s password if the WAP is secure.
5. Tap Connect to store the new information and connect
to the target WAP.
Note: An SSID is a unique key which identifies a wireless LAN.
Its purpose is to stop other wireless equipment from
accessing your LAN — whether accidentally or
intentionally. To communicate, wireless devices must be
configured with the same SSID.
WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes
associated with a physical or on-screen button on most
WAPs) allows you to pair your device and WAP without the
need for entering a passcode. This process is similar to Wi-Fi
Direct pairing.
In this case, once the WPS feature is active on your WAP,
your device can then detect it and then immediately pair to it.
Note: WPS-capable routers appear in the Wi-Fi list of available
devices with the term (WPS available) below their name.
To pair your device using WPS:
1. Follow the WPS activation instructions specific to your
Wireless Access Point.
2. From the main Settings page, tap Connections tab ➔
Wi-Fi.
3. Press
then tap WPS push button.
4. Once the connection is complete, confirm the external
router now appears in the Wi-Fi list as connected.
216
WPS PIN Entry
Wi-Fi Direct Setup and Settings
If a WPS Push Button does not work, there is an alternative
WPS connection method where you would use a device
generated PIN number to establish the connection. This
number is then entered into your WAP’s WPS client PIN field
to complete the connection.
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.
To pair your device using WPS PIN:
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
Displays when Wi-Fi Direct is active and
communicating.
2. Press
then tap WPS PIN entry.
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
3. Write down the generate PIN number and enter it into
your Wi-Fi Router’s client PIN field.
4. Once the connection is complete, confirm the external
router now appears in the Wi-Fi list as connected.
Changing Your Settings
217