Galaxy S6 edge. GalaxyWiFi

 2. Drag the Status Bar down to display the Notification Panel.
3. You will see either Connected as a media device or Connected as a camera. The files on your phone can now be accessed via your computer.
l For most transfers, you'll want to use Connected as a media device.
l To change the option, tap the notification in the Notification Panel to open the USB
computer connection window, and then tap the desired option. 4. On your computer, navigate to the detected device (such as through the My Computer menu) and open it.
5. Select Phone for internal phone storage.
6. Select a folder (for example, Music for songs and albums) and copy files to it from your computer.
7. When you are done, disconnect your phone from your computer.
The transferred files are now saved to your phone.
Note: You can also copy files from your phone to your computer, for example, if you want to save pictures or videos from your phone on your computer.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use your phone’s Wi-Fi, you need access to a wireless access point or “hotspot.”
The availability and range of the Wi-Fi signal depends on a number of factors, including infrastructure and other objects through which the signal passes.
Connectivity
246
Turn Wi-Fi On and Connect to a Wireless Network
Use the Wireless & networks setting menu to enable your phone’s Wi-Fi radio and connect to an available Wi-Fi network.
1. From home, tap Apps 2. Tap Wi-Fi > Settings
.
.
The Wi-Fi settings menu appears.
3. Tap the ON/OFF switch to turn Wi-Fi on.
Connectivity
247
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
l To disable Wi-Fi, tap the ON/OFF switch again.
4. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap CONNECT.
Your phone is connected to the Wi-Fi network. You will see in the Status Bar.
l The password, for a household wireless LAN router, is sometimes found on a sticker on the router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For password for a public wireless LAN, check with user's service provider.
l Entering a password is not required if an access point is not security protected.
Connectivity
248
Note: The next time your phone connects to a previously accessed secured wireless network, you will not be prompted to enter the password again, unless you reset your phone to its factory default settings or you instruct the phone to forget the network.
Wi-Fi Settings
Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.
1. From home, tap Apps 2. Tap Wi-Fi > Settings
.
.
The Wi-Fi settings menu appears.
3. Tap the ON/OFF switch to turn Wi-Fi on.
Connectivity
249
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
l To disable Wi-Fi, tap the ON/OFF switch again.
4. Tap MORE > Advanced.
The advanced Wi-Fi settings menu appears.
5. Configure your Wi-Fi settings.
Your Wi-Fi settings changes are saved.
Disconnect Wi-Fi
You may want to remove a connected Wi-Fi network.
Connectivity
250
1. From home, tap Apps 2. Tap Wi-Fi > Settings
.
.
The Wi-Fi settings menu appears.
3. Press and hold the name of the connected access point, and then tap Forget network.
Connectivity
251
Wi-Fi is disconnected and the network settings are removed.
l After “forgetting” an access point, you need to enter the correct password (and other network settings, if required) to reconnect.
Wi-Fi Direct
Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices using only Wi-Fi, without a wireless access point (network) or via the Internet.
1. From home, tap Apps Connectivity
> Settings
.
252
2. Tap Wi-Fi .
The Wi-Fi settings menu appears.
3. Tap the ON/OFF switch to turn Wi-Fi on.
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
4. Tap Wi-Fi Direct.
Connectivity
253
The Wi-Fi Direct settings menu appears.
l Wi-Fi Direct and Wi-Fi are unavailable at the same time.
5. If a device is found, tap the device entry to connect.
l If connected via Wi-Fi, you will see a confirmation. Follow the onscreen instructions.
6. Accept the connection on the other device.
The phone is connected via Wi-Fi Direct.
l If a connection is not accepted after a certain period, the connection request is cancelled.
l To stop a connection, tap the device name on the Wi-Fi Direct list.
Connectivity
254